---
title: "Condom manufacturers: Industry Risk Guide"
description: "Condom manufacturers compound natural rubber latex or synthetic polymers, dip glass formers on continuous lines, cure, leach and electronically test every…"
url: https://www.urbanstat.com/industry-risk-guides/condom-manufacturers/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Condom manufacturers

Condom manufacturers compound natural rubber latex or synthetic polymers, dip glass formers on continuous lines, cure, leach and electronically test every piece, then lubricate and seal it in foil. The product is a regulated medical device, so pinholes, breakage and labeling errors lead to recalls and injury claims.

Manufacturing · NAICS 326299 · SIC 3069 · Updated November 2026

Risk profile

1. [Property Elevated](#line-property)
2. [Business interruption High](#line-bi)
3. [Premises liability Low](#line-gl)
4. [Products and completed work High](#line-products)
5. [Workers’ injury Elevated](#line-wc)
6. [Commercial auto Low](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment Moderate](#line-marine)
9. [Environmental Moderate](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Low](#line-prof)
12. [Umbrella and excess High](#line-umbrella)

**Business interruption.** Dipping lines are custom-built and registered to the product, so replacement and regulatory re-approval take many months.

Loss drivers

## Where losses come from.

1. Product failure through breakage, pinholes or degraded latex, alleged to cause pregnancy or infection
2. Batch recalls after failed burst, leak or shelf-life testing
3. Long outages when a dipping line or the latex supply is lost

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Condom manufacturers
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Low, 1 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Synthetic polyisoprene and polyurethane products are growing for latex-allergic users, bringing solvent handling and new failure modes into plants built for latex.
- Subscriptions and online marketplaces sell more product direct, raising counterfeit, privacy and storage condition questions that sit outside the maker's control.
- Hotter summers and longer supply chains put more finished stock at risk of degrading before sale, which makes stability data and shipping controls matter more.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: Elevated (3 of 5)

Dipping is a wet process, but gas-fired curing ovens, dried latex build-up, solvent for synthetic lines and foil and carton stock burn.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Solvent-based dipping of synthetic polyisoprene or polyurethane
- Latex and lint deposits inside ovens and exhaust ducts
- Finished goods and packaging stored beside the dipping hall

**Controls that matter**

- Oven burner safeguards and scheduled duct cleaning
- Sprinklers throughout, with solvent areas cut off and ventilated
- Climate-controlled finished goods store in a separate fire area

### Business interruption: High (4 of 5)

Dipping lines are custom-built and registered to the product, so replacement and regulatory re-approval take many months.

Covers: How long and how costly a shutdown is.

**Watch for**

- One or two dipping lines producing all output
- Public health program contracts with fixed delivery dates and penalties
- Latex concentrate from a single plantation region

**Controls that matter**

- Second plant or approved contract dipper able to supply
- Latex and finished goods buffer stock held off site

### Premises liability: Low (1 of 5)

Clean, access-controlled plants receive almost no visitors and do no work off site.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Ammonia from latex storage noticeable beyond the boundary

**Controls that matter**

- Sealed latex tanks with vent scrubbing

### Products and completed work: High (4 of 5)

A failed unit means an unplanned pregnancy or infection claim, latex proteins trigger allergy, and one bad batch spans millions of units.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Spermicide, desensitizing or warming lubricants added to the product
- Private-label supply where the brand owner controls claims and storage
- Export to hot climates without stability data

**Controls that matter**

- Electronic pinhole testing of every unit plus batch burst testing
- Stability studies supporting the printed expiry date
- Lot traceability to latex batch, line and shift

### Workers’ injury: Elevated (3 of 5)

Operators mount each condom on test mandrels by hand at speed, around ammonia vapor, latex proteins, hot ovens and wet floors.

Covers: Injuries and illness to employees.

**Watch for**

- High-rate manual testing and stripping stations
- Compounding with accelerator powders and ammonia without extraction

**Controls that matter**

- Job rotation and automated testing where practical
- Local exhaust in compounding and powder-free handling
- Latex allergy screening and non-slip flooring around dip tanks

### Commercial auto: Low (1 of 5)

Product leaves by contract carrier and staff seldom drive on business.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Sales staff using personal cars for customer visits

**Controls that matter**

- Non-owned auto cover for occasional business use

### Crime and theft: Moderate (2 of 5)

Branded finished goods are compact and resold easily, and rejected product must not reach the market.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Reject and expired stock leaving the site intact

**Controls that matter**

- Witnessed destruction of rejects and secured finished goods cage

### Inland marine and equipment: Moderate (2 of 5)

Export containers spend weeks at sea and in ports, where heat shortens latex life before the product is sold.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Shipments through tropical ports without temperature monitoring

**Controls that matter**

- Temperature loggers in containers and insulated or refrigerated shipping

### Environmental: Moderate (2 of 5)

Leach and wash water carries latex solids, zinc and ammonia, treatable on site; solvent lines add recovery and emission duties.

Covers: Pollution on or from the site or the work.

**Watch for**

- Wastewater discharged with no coagulation or settlement step

**Controls that matter**

- Effluent treatment with sludge removal and monitored discharge

### Cyber and data: Elevated (3 of 5)

Batch release depends on electronic test data and lot records, and direct online sales hold sensitive purchase histories.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Direct-to-consumer web store or subscription service
- Testing machines and batch records on one flat network

**Controls that matter**

- Offline backups of quality and batch release records
- Customer payments taken through a hosted checkout

### Professional liability: Low (1 of 5)

No advice or service is sold; claims over product failure fall under products liability.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Design and testing services sold to private-label brand owners

**Controls that matter**

- Quality agreements setting each party's duties for specification and testing

### Umbrella and excess: High (4 of 5)

One defective lot reaches very large numbers of users, inviting class actions and serious infection claims beyond primary limits.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Public health programs or large retailers taking whole production lots
- Products carrying added drugs or novelty claims

**Controls that matter**

- Lot traceability that confines a recall to defined batches
- Claims and labeling reviewed before each new product launch

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Usually modern single-story steel-frame plants with long dipping halls, clean packing rooms, latex tank farms and a climate-controlled warehouse, often in industrial parks.
- **Occupancy**: Latex compounding with ammonia and accelerator powders, gas-fired curing ovens on continuous lines, solvent dipping for synthetic products, and foil, carton and lubricant storage.
- **Protection**: Sprinklers throughout, burner safeguards on ovens, cut-off and ventilated solvent rooms, detection in exhaust ducts, backup power for climate control and controlled access to finished goods.
- **Exposure**: Industrial park neighbors share roads and utilities; a long regional power outage threatens climate control and stock even when no fire reaches the plant.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What are annual output and sales, and which buyers take the largest share?
- How many dipping lines run, and how much output is natural latex versus synthetic?
- Do private-label or public health contracts pass recall, testing or late delivery penalties to the plant?
- Has any lot been rejected by a buyer or a regulator, and what caused it?
- What product claims for breakage, pregnancy, infection or allergy have been made, and how were they resolved?

### Documents to request

- Loss runs including product complaints and recall history
- Device registrations and the latest quality system audit reports
- Stability study summaries supporting the labeled expiry date
- Private-label and public health program supply agreements
- Fire protection and oven burner inspection reports

### On site: products and regulation

- Which markets are supplied, and under what device approvals?
- Which lubricants are applied: plain silicone, spermicidal, desensitizing or warming?
- How are foil wrappers sealed, printed with lot and expiry, and checked for leaks?

### On site: quality system

- How is every unit tested, and what batch tests decide release?
- What stability data support the expiry date and storage conditions?
- How are rejects segregated and destroyed?
- What did the latest regulatory or customer audits find?

### On site: plant and continuity

- Who builds and maintains the dipping lines and glass formers, and which spares are held?
- How are curing ovens fired, safeguarded and cleaned?
- Where does latex come from, and how much stock is held?

### On site: records and history

- How are complaints of breakage or allergy logged and investigated?
- How long are retained samples and batch records kept after the expiry date?

### Refer or decline if you find

- Batches released without burst and leak testing
- Expiry dating not supported by stability studies
- Open regulatory findings on the quality system
- All output from a single dipping line with no backup
- Rejected product sold on as seconds

Location

## How UrbanStat data helps.

Latex and finished condoms degrade with heat and humidity, so a storm that takes out power and climate control spoils stock without touching the building. Flood contaminates dip tanks and clean packing rooms.

Flood · Hurricane · Wind

- Flood scores at the address show whether dip tanks, clean packing rooms and climate-controlled stores at ground level are exposed to contamination by water.
- Hurricane and wind scores for the site gauge storm exposure for a plant where a long power outage spoils heat-sensitive latex and finished stock.
- Parcel and permit data give construction date, building value and permit history, a cross-check on the declared building value of a custom-built dipping plant.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Hurricane · Wind

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**2.4** recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

All other rubber product manufacturing

**2.4**

All private industry

**2.3**

0.9 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: All other rubber product manufacturing (NAICS 326299). Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**7** fatal work injuries in 2024.

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Rubber Product Manufacturing (NAICS 3262), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**133** citations from 30 inspections; 58% were classed serious, willful or repeat.

- 1910.119 Process safety management of highly hazardous chemicals **27**
- 1910.147 The control of hazardous energy (lockout/tagout) **19**
- 1910.134 Respiratory protection **10**
- 1910.212 General requirements for all machines **7**
- 1910.1200 Hazard communication **7**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: All Other Rubber Product Manufacturing (NAICS 326299). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**97** facilities reported toxic chemical releases totaling **1.7 million pounds** on and off site.

- Zinc compounds **480,794**
- Toluene **380,029**
- Xylene **266,586**

Chemicals released in the largest amounts, in pounds. 35 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: All Other Rubber Product Manufacturing (NAICS 326299). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Product recall**: A failed lot must be traced and pulled from pharmacies, clinics and online sellers across several markets.
- **Equipment breakdown**: Dipping line drives, ovens and electronic testers fail without a fire and stop registered production.
- **Contingent business interruption**: Latex concentrate and foil laminate come from few sources, and losing one supplier halts the lines.
- **Stock throughput**: Heat-sensitive finished goods spend weeks in containers, ports and distributors' warehouses before sale.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [326299](https://www.urbanstat.com/industry-risk-guides/naics/?q=326299) | All Other Rubber Product Manufacturing |
| SIC 1987, primary | [3069](https://www.urbanstat.com/industry-risk-guides/sic/?q=3069) | Fabricated Rubber Products, NEC |

**Related business types**

- [Medical device manufacturers](https://www.urbanstat.com/industry-risk-guides/medical-device-manufacturers/)
- [Rubber product manufacturers](https://www.urbanstat.com/industry-risk-guides/rubber-product-manufacturers/)
- [Pharmaceutical manufacturers](https://www.urbanstat.com/industry-risk-guides/pharmaceutical-manufacturers/)
- [Cosmetics and toiletries manufacturers](https://www.urbanstat.com/industry-risk-guides/cosmetics-and-toiletries-manufacturers/)
- [Medical equipment dealers](https://www.urbanstat.com/industry-risk-guides/medical-equipment-dealers/)
- [Compare Condom manufacturers with Medical device manufacturers](https://www.urbanstat.com/industry-risk-guides/compare/?a=condom-manufacturers&b=medical-device-manufacturers)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/condom-manufacturers/

- Page: Condom manufacturers: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/condom-manufacturers/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
