Clock and watch manufacturers

Clock and watch manufacturers assemble movements, cases, dials and straps into timepieces ranging from wall clocks to luxury wristwatches, sometimes with wood case shops, plating and engraving. Small, valuable stock invites theft, and clock case woodworking and lacquering bring the fire load.

Manufacturing · NAICS 334519 · SIC 3873 · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Theft of finished watches, precious-metal cases and gemstones by burglars or staff

  2. 02

    Loss of sample lines and shipments in transit or at trade fairs

  3. 03

    Fires in case woodworking, lacquering and polishing areas

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: Moderate, 2 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Moderate, 2 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: High, 4 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Moderate, 2 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Connected watches bring lithium cells, charging docks and app data into a trade built on mechanical movements, adding fire, recall and privacy exposure.
  • Organized smash-and-grab raids and robberies aimed at luxury watches push up security requirements for workshops, showrooms and couriers.
  • Direct online sales and certified pre-owned programs put more high-value stock into the post and add authentication and counterfeit disputes.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Elevated
Watch assembly is clean bench work, but wood case machining, lacquer spraying, buffing lint and plating baths add real ignition sources.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Wood dust collection and lacquer spraying in the main building
  • Buffing and polishing dust allowed to build up in ducts
  • Lithium cells for smartwatches stored in bulk
Controls that matter
  • Sprinklers, with finishing in a cut-off, ventilated spray room
  • Dust collectors located outside and cleaned regularly
  • Solvents and lacquers in approved cabinets or a separate store

Business interruption

Elevated
Most makers rely on a few outside movement suppliers and sell heavily before the gift season.

How long and how costly a shutdown is.

Watch for
  • One movement supplier for the whole range
  • Sales concentrated in the last quarter of the year
Controls that matter
  • Movement stock held ahead of the peak
  • Alternate movement calibers qualified for main models

Premises liability

Low
Workshops are closed to the public apart from occasional factory tours or a small showroom.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Tours passing through polishing or woodworking areas
Controls that matter
  • Tours kept to marked routes with machinery guarded

Products and completed work

Moderate
Timepieces seldom injure, though tall clocks tip, button cells are swallowed by children and smartwatch batteries overheat.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Freestanding tall-case clocks sold without wall anchors
  • Coin cell compartments that open without a tool
  • Nickel-bearing case backs causing skin reactions
Controls that matter
  • Anti-tip hardware and instructions with every floor clock
  • Screw-secured battery doors and ingestion warnings
  • Certified cells and chargers for connected watches

Workers’ injury

Moderate
Fine bench work strains eyes, necks and wrists; case shops add woodworking machines, polishing lathes and solvents.

Injuries and illness to employees.

Watch for
  • Polishing lathes run without guards or dust extraction
  • Unguarded saws and shapers in the case shop
Controls that matter
  • Magnification, adjustable benches and task rotation
  • Guarding and extraction on woodworking and polishing machines

Commercial auto

Moderate
Sales representatives visit retailers with sample cases; deliveries go by insured courier.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Samples left in parked cars overnight
Controls that matter
  • Samples never left unattended in vehicles, with driving records checked

Crime and theft

High
A tray of finished watches, gold cases or loose stones is worth a great deal and fits in a coat pocket.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Precious metals and stones issued to benches without weighing
  • Finished goods left out of the safe overnight
  • No reconciliation of filings, sweeps and scrap
Controls that matter
  • Rated safes or a vault, with a monitored alarm and hold-up buttons
  • Daily count of watches, cases and stones against work orders
  • Background checks and separation of stock and record duties

Inland marine and equipment

Elevated
Shipments to retailers, salespeople's sample lines, trade fair displays and customers' watches in for service are all off premises or in care.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • High-value sample lines carried by one person
  • Customers' heirloom watches accepted for repair with no agreed value
Controls that matter
  • Jewelers block or floater cover with per-person carry limits
  • Repair intake receipts stating condition and agreed value

Environmental

Moderate
Plating baths, cleaning solvents, lacquers and polishing compounds are used in small quantities.

Pollution on or from the site or the work.

Watch for
  • In-house gold or rhodium plating with cyanide solutions
  • Stocks of old radium-painted dials or hands
Controls that matter
  • Plating wastes collected by a licensed handler
  • Legacy luminous parts surveyed and disposed of properly

Cyber and data

Moderate
Most sell through retailers and hold modest data, though direct online sales and connected watch apps add customer and health data.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Own web store taking card payments and storing customer accounts
  • Connected watches syncing wearers' health data to the insured's app
Controls that matter
  • Hosted, tokenized checkout so card numbers are never stored
  • Security testing and update support for watch firmware and apps

Professional liability

Low
No advice or design service is sold; repair workmanship falls under products and customers' property in care.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Valuations or authenticity certificates issued for customers' watches
Controls that matter
  • Valuations issued only by trained staff under written terms

Umbrella and excess

Moderate
Liability events are isolated: a tipped floor clock or a swallowed button cell is serious but rarely affects many people.

How likely one liability event is to exhaust primary limits.

Watch for
  • Floor clocks or button-cell products sold in volume through mass retailers
Controls that matter
  • Tip and battery-door tests documented for each model
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Small workshops in multi-tenant light industrial or older mill buildings, sometimes above shops, with wood case shops and finishing rooms fitted into the original shell.
Occupancy
Clean bench assembly of movements and cases beside wood machining, lacquer spraying, buffing and occasional plating, with precious metals and finished pieces concentrated in safes.
Protection
Sprinklers, a cut-off spray room, dust collection outside, a rated safe or vault, monitored intrusion and hold-up alarms, cameras and controlled access to stock rooms.
Exposure
Shared walls and roofs let fire and water in from other tenants; street frontage or a showroom invites smash-and-grab raids and break-ins through adjoining units.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: products and values

On site: security

On site: workshop and protection

On site: records and history

Refer or decline if you find

  • Finished watches or precious metals left outside the safe overnight
  • No daily reconciliation of stones and precious metals
  • Lacquer spraying beside woodworking with shared dust extraction
  • Sample lines routinely left in vehicles
05 / Location

How UrbanStat data helps.

Burglary and robbery risk follows the neighborhood and police response times. Ground-floor workshops and basement vaults are exposed to flood, which ruins movements, dials and wooden cases alike.

CrimeFloodWindEarthquake
  • Crime scores at the address inform safe, alarm and overnight stock limits for a workshop holding finished watches and precious metals.
  • Flood scores for the site show whether basement vaults and ground-floor benches holding movements and wooden cases are exposed.
  • Parcel and permit data give the construction date and permit history, a check on building age and on whether a case shop or spray room was added.
Crime · Flood · Wind · Earthquake
06 / Public loss data

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

1.2 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.

Other measuring and controlling device manufacturing
1.2
All private industry
2.3

0.7 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Other measuring and controlling device manufacturing (NAICS 334519). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

6 fatal work injuries in 2024.

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Navigational, Measuring, Electromedical, and Control Instruments Manufacturing (NAICS 33451), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

39 citations from 7 inspections; 44% were classed serious, willful or repeat.

  • 1910.134 Respiratory protection
    9
  • 1910.1200 Hazard communication
    3
  • 1910.107 Spray finishing using flammable and combustible materials
    3
  • 1910.106 Flammable liquids
    3
  • 1910.132 General requirements (personal protective equipment)
    2

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Other Measuring and Controlling Device Manufacturing (NAICS 334519). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

14 facilities reported toxic chemical releases totaling 14,717 pounds on and off site.

  • Diisocyanates
    8,250
  • Methanol
    5,353
  • Lead
    947

Chemicals released in the largest amounts, in pounds. 8 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Other Measuring and Controlling Device Manufacturing (NAICS 334519). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Jewelers block
Finished watches, precious-metal cases and stones need all-risks cover on and off premises, including at fairs and in transit.
Product recall
A faulty battery door, overheating watch cell or unstable floor clock means pulling one model from many retailers.
Equipment breakdown
Machining centers for cases and plates, engraving lasers and dust collectors fail without fire and stop production.
Classification
SystemCodeIndustry
NAICS 2022, primary334519Other Measuring and Controlling Device Manufacturing
NAICS 2022339910Jewelry and Silverware Manufacturing
SIC 1987, primary3873Watches, Clocks, Clockwork Operated Devices, and Parts
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →