Yarn spinning and weaving millsNAICS 313110 · SIC 2281
Spinning and weaving mills open baled fiber, card and spin it into yarn, then weave, knit, bond or braid it into fabric, nonwovens and cordage. Lint and fiber dust coat every surface around fast machinery, so a spark from a bearing or tramp metal spreads fire through rooms and ducts within seconds.
NAICS 313110 Fiber, Yarn, and Thread MillsSIC 2281 Yarn Spinning MillsNAICS 313210 Broadwoven Fabric MillsNAICS 313240 Knit Fabric Mills+6 more codes
Where losses come from.
- 01
Fires starting in opening, carding and waste-handling equipment and spreading through lint and ducts
- 02
Workers caught in rollers, belts, cards and looms
- 03
Long shutdowns while specialized spinning and weaving machinery is replaced
- PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: Moderate, 2 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: Moderate, 2 of 5; sector average 3.6; all business types 3.6.
- Automation and air-jet spinning cut the workforce and lint exposure per machine, but make each line costlier and slower to replace.
- Demand for nonwovens in filters, wipes and medical goods brings polymer extrusion and thermal bonding into mills that once handled only natural fiber.
- Recycled fiber shredded from used garments and cutting waste brings buttons, zippers and other tramp metal into openers, raising the frequency of spark-started fires.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
HighLoose fiber, lint on every surface and air ducts linking machines let a small spark become a fast-moving flash fire.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Fire-packed bales and tramp metal entering the opening line unchecked
- Lint build-up on ceilings, cable trays and machine frames
- Old multi-story mills with oil-soaked timber floors and open stairwells
- Magnets and metal detection at openers, spark detection and diverters in ducts
- Sprinklers throughout, including inside ducts, filters and waste houses
- Traveling cleaners plus scheduled blow-down and bearing temperature checks
Business interruption
HighSpinning frames, air-jet looms and warp preparation lines are built to order by a few makers and take many months to deliver and commission.
How long and how costly a shutdown is.
- One opening line or one sizing machine feeding the whole mill
- Customers supplied just in time with qualified fabrics
- Bale warehouse holding a season's fiber in one fire area
- Fire walls dividing opening, spinning, weaving and warehousing
- Sister mills or commission weavers able to take orders
- Fiber stock split among detached warehouses
Premises liability
LowMills are closed industrial sites with few visitors beyond truck drivers and technicians.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Mill outlet store or public tours of historic buildings
- Drivers and contractors signed in and kept to marked routes
Products and completed work
ModerateYarn and unfinished fabric rarely injure anyone; claims are for off-specification goods, and for failure of technical fabrics.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Fabric for airbags, seat belts, protective clothing or medical use
- Fiber content or flammability certificates issued without testing
- Ropes, slings or tire cord where a failure injures or kills
- Testing and certification matched to each end use
- Contracts limiting liability for customers' downstream losses
Workers’ injury
HighIn-running rollers, card cylinders, belts and looms cause amputations, and noise, fiber dust and repetitive doffing cause long-term illness.
Injuries and illness to employees.
- Cleaning or clearing laps with machines running
- Noise above safe levels throughout weave rooms
- Raw cotton dust in opening and carding without air monitoring
- Interlocked guards and strict lockout for cleaning and maintenance
- Hearing conservation with audiometric testing
- Dust capture at cards with respiratory health surveillance
Commercial auto
ModerateBales in and rolls out move mainly by carrier; the mill's own trucks shuttle between plants and warehouses.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Own tractor-trailers running between plants
- Yard trucks crossing public roads
- Driver qualification files and maintenance records for mill trucks
- Yard vehicles kept on private roads
Crime and theft
LowBulk fiber, yarn and gray cloth have little appeal to thieves and no cash is handled.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Copper wiring and motors in idle or partly closed buildings
- Fenced site with monitored alarms on unoccupied sections
Inland marine and equipment
ModerateYarn and fabric go out to commission dyers and finishers, and imported machinery arrives in high-value shipments.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Goods held at outside processors with no written terms
- New machinery in transit and during installation
- Processing floater for goods at dyers and finishers
- Transit and installation cover arranged for machinery purchases
Environmental
ModerateSizing chemicals, lubricants and dust are modest, but century-old mill sites often carry buried fuel tanks and asbestos.
Pollution on or from the site or the work.
- Historic boiler houses, coal yards and underground oil tanks
- Asbestos insulation and roofing in older buildings
- Environmental site assessment on file, with tanks removed or tested
- Asbestos register and managed removal before any renovation
Cyber and data
ElevatedModern spinning and weaving lines run on networked controls and planning software, and ransomware halts every machine and order at once.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Machine makers' remote access left open to the production network
- Old controller software that can no longer be patched
- Production network separated from office systems, with remote access logged and time-limited
- Offline backups of machine settings, patterns and order data
Professional liability
LowMills sell goods, not advice; disputes over fabric made to a customer's specification fall under products.
Loss or injury caused by advice, design, testing, care or another professional service.
- Fabric development or testing services sold to brands as a separate service
- Written specifications approved by the customer before bulk production
Umbrella and excess
ModerateLiability exposure is mostly modest, but technical yarns, cordage and fabrics in safety-critical uses can cause serious injuries in the field.
How likely one liability event is to exhaust primary limits.
- Sales of airbag fabric, tire cord, or climbing and lifting rope
- Contract terms and testing records matched to each safety-critical end use
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Either century-old multi-story brick mills with heavy timber floors, open stairwells and oil-soaked wood, or vast modern single-story steel sheds with lightweight roofs and few fire walls.
- Occupancy
- Bale opening, carding and spinning throw off lint and fiber dust, pneumatic ducts carry fiber and sparks, and nonwoven lines add thermal bonding ovens and melted polymer.
- Protection
- Sprinklers throughout, including ducts, filter houses and waste rooms, spark detection with diverters in fiber conveying, fire walls with tested doors, and traveling cleaners on machines.
- Exposure
- Riverside mill towns place old mills close to homes and other plants, and bale warehouses and waste houses on the same yard spread fire between buildings.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: process and materials
On site: fire protection and housekeeping
On site: machinery and people
On site: building
Refer or decline if you find
- Opening and carding lines with no spark detection or duct sprinklers
- Heavy lint on beams, lights and cable trays
- Fire doors blocked open between departments
- Sprinkler system impaired or not covering waste houses
- Machine guards removed for faster cleaning
How UrbanStat data helps.
Older mills were built on rivers for power and process water, so low floors and basements flood. Modern mills are vast single-story sheds whose lightweight roofs are exposed to tornado, wind and hail, with humidity-sensitive fiber below.
- Flood scores at the address show whether a riverside mill's ground floor, basement drives and bale stores are exposed, detail lost in postal-code flood zones.
- Parcel and permit data give the construction date and renovation permits, separating century-old timber-floored mills from modern steel sheds before a survey is ordered.
- Tornado, wind and hail scores for the site inform roof deductibles on wide single-story mill buildings where a roof breach soaks fiber and machinery.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
3.0 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.
0.6 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Fiber, yarn, and thread mills (NAICS 3131), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
5 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Textile Mills (NAICS 313), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
27 citations from 8 inspections; 56% were classed serious, willful or repeat.
- 1910.303 General (electrical)5
- 1910.212 General requirements for all machines3
- 1910.134 Respiratory protection3
- 1910.219 Mechanical power-transmission apparatus3
- 1910.305 Wiring methods, components, and equipment for general use2
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Fiber, Yarn, and Thread Mills (NAICS 313110). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
1 facilities reported toxic chemical releases totaling 19,383 pounds on and off site.
- Ammonia11,043
- Toluene6,784
- Hydrochloric acid1,532
Chemicals released in the largest amounts, in pounds. 1 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Fiber, Yarn, and Thread Mills (NAICS 313110). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Equipment breakdown
- Spinning frames, looms, compressors and humidification plants fail without fire and stop the line for weeks.
- Contingent business interruption
- A fire at a specialty fiber supplier or a key customer's plant stops orders as surely as a fire at the mill.
- Product recall
- Fabric or cord built into vehicles, airbags or medical goods can trigger recalls whose cost is passed back to the mill.
- Stock at commission processors
- Yarn and unfinished fabric at outside dyers and finishers often exceed the off-premises limit of a property policy.
- Pollution legal liability
- Old mill sites carry buried oil tanks, coal ash and asbestos that general liability policies exclude.
NAICS and SIC codes for yarn spinning and weaving mills
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 313110 | Fiber, Yarn, and Thread Mills |
| NAICS 2022 | 313210 | Broadwoven Fabric Mills |
| NAICS 2022 | 313240 | Knit Fabric Mills |
| NAICS 2022 | 313220 | Narrow Fabric Mills and Schiffli Machine Embroidery |
| NAICS 2022 | 313230 | Nonwoven Fabric Mills |
| NAICS 2022 | 314994 | Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills |
| SIC 1987, primary | 2281 | Yarn Spinning Mills |
| SIC 1987 | 2211 | Broadwoven Fabric Mills, Cotton |
| SIC 1987 | 2221 | Broadwoven Fabric Mills, Manmade Fiber and Silk |
| SIC 1987 | 2257 | Weft Knit Fabric Mills |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.