Textile finishing and coating millsNAICS 313310 · SIC 2261

Finishing and coating mills run greige cloth and tufted carpet through chemical baths, gas-fired tenter frames and curing ovens to add color, pattern and performance, or spread polymer and latex coatings onto it. Ovens and ducts collect lint and oily condensate, effluent is heavy, and much of the cloth belongs to customers.

NAICS 313310 Textile and Fabric Finishing MillsSIC 2261 Finishers of Broadwoven Fabrics of CottonNAICS 313320 Fabric Coating MillsNAICS 314110 Carpet and Rug Mills+3 more codes

Manufacturing · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Fires in tenter frames, dryers, curing ovens and their exhaust ducts

  2. 02

    Pollution from dyes, finishing chemicals, solvents and wastewater

  3. 03

    Damage to customers' fabric while it is being processed

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Low, 1 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: High, 4 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Restrictions on fluorinated water and stain repellents keep spreading, forcing reformulation and bringing claims over past use in fabrics and carpets.
  • Digital inkjet printing replaces some screen and rotary printing, cutting water and dye use but adding ink and solvent storage.
  • Water reuse and zero-discharge treatment cut effluent risk but make the plant depend on complex treatment equipment that can halt production.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

High
Fabric passes through gas-fired ovens where lint, finishing oils and condensate in ducts ignite, and solvent coating adds explosive vapors.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Solvent-based coating or laminating lines
  • Tenter frame exhaust ducts with heavy oil and lint deposits
  • Thermal oil heaters, singeing burners and peroxide or chlorite stores
Controls that matter
  • Scheduled cleaning of oven interiors, filters and exhaust ducts
  • Solvent vapor monitoring with ventilation interlocks on coating ovens
  • Sprinklers or fixed extinguishing inside ovens and ducts, with burner safeguards

Business interruption

High
Continuous dye ranges, printers and tenter frames are large custom lines, and customers' production stalls when their finisher is down.

How long and how costly a shutdown is.

Watch for
  • One tenter frame or one boiler serving the plant
  • Specialized finishes few other mills can match
  • Wastewater permit that could be suspended after an incident
Controls that matter
  • Mutual aid agreements with other finishers for key processes
  • Spare burners, drives and control components held on site
  • Duplicate boilers or a rental boiler connection point

Premises liability

Low
Few visitors enter; nuisance claims over odor, steam plumes and colored discharge fall under the environmental line.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Customer representatives on the production floor during trials
Controls that matter
  • Escorted visits with protective equipment issued at reception

Products and completed work

Elevated
Finishes are sold on performance: flame retardancy, waterproofing or color fastness that fails in use, and residues that irritate skin.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Flame-retardant treatment of children's sleepwear, upholstery or workwear fabrics
  • Restricted dyes, formaldehyde resins or fluorinated repellents in use
  • Coated fabrics for inflatables, tarpaulins or protective gear
Controls that matter
  • Batch testing against the specified performance standard, with retained samples
  • Restricted substance list enforced on chemical purchases
  • Written specifications and liability limits agreed with each customer

Workers’ injury

Elevated
Operators thread cloth through in-running rollers and work with caustic, acids, bleach, hot liquor, steam and wet floors.

Injuries and illness to employees.

Watch for
  • Manual chemical weighing and pouring in the drug room
  • Thread-up of running machines without nip guards
  • Solvent or isocyanate vapors at coating heads
Controls that matter
  • Automated chemical dispensing with eyewash and showers nearby
  • Nip guards, trip wires and emergency stops along every range
  • Local exhaust at coating lines with air monitoring

Commercial auto

Low
Customers and carriers move the fabric; the mill runs little beyond a yard truck and a company car.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Own trucks collecting and returning customers' goods
Controls that matter
  • Driver record checks where the mill delivers

Crime and theft

Low
Unfinished and finished cloth in bulk rolls has low theft appeal and no cash is taken.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Branded or licensed printed fabrics attractive for diversion
Controls that matter
  • Roll counts reconciled to customer orders at dispatch

Inland marine and equipment

Elevated
Commission finishers hold large values of other people's fabric and are blamed when a dye lot or finish goes wrong.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • No written terms limiting liability for customers' goods
  • High-value technical or fashion fabrics on site in peak season
Controls that matter
  • Bailee or processor's cover sized to peak customer values
  • Signed processing terms and approval of lab dips before bulk runs

Environmental

High
Dyes, salts, caustic, solvents and persistent water repellents leave in large wastewater flows and oven exhaust, often into a river.

Pollution on or from the site or the work.

Watch for
  • Fluorinated repellents or chlorinated solvents used now or in the past
  • On-site lagoons, sludge beds or direct river discharge
  • Coating ovens venting solvent without abatement
Controls that matter
  • Wastewater treatment with continuous monitoring and permit compliance records
  • Chemical and solvent storage with secondary containment and isolated drains
  • Thermal oxidizer or solvent recovery on coating exhaust

Cyber and data

Elevated
Automated dye kitchens, recipe systems and networked ranges run the plant, and ransomware stops dyeing and shipping with customers' goods inside.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Color recipes and customer orders held on one unbacked server
  • Remote vendor access to dosing and range controls
Controls that matter
  • Offline backups of recipes, lab dips and order records
  • Plant controls segmented from office and supplier connections

Professional liability

Moderate
Commission finishers promise a finish to the customer's specification, and a wrong treatment or test result spoils whole lots of others' fabric.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • In-house lab issuing flame-retardancy or performance certificates to customers
  • Finish recommendations given without written customer approval
Controls that matter
  • Lab results reviewed and signed off by a second technician
  • Approved lab dips and trial runs before bulk processing

Umbrella and excess

Elevated
Flame-retardant or protective finishes that fail can contribute to fatal fires, and repellent chemistry draws claims from many plaintiffs at once.

How likely one liability event is to exhaust primary limits.

Watch for
  • Finishing for children's sleepwear, upholstery, workwear or carpet for public buildings
Controls that matter
  • Retained samples and test records kept for the life of the product
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Typically large single-story masonry or steel plants on riverside sites, often extended over decades, with wet process halls, ovens, boiler houses and chemical stores under linked roofs.
Occupancy
Gas-fired tenter frames, dryers and curing ovens collect lint and oily condensate; solvent coating, latex carpet backing, thermal oil heaters and oxidizer stores add ignition and explosion hazards.
Protection
Sprinklers plus fixed extinguishing inside ovens and exhaust ducts, tested burner safeguards, solvent vapor interlocks, separated chemical rooms, and storage sprinklers designed for rolled goods.
Exposure
River frontage puts lagoons and chemical stores beside water, and neighbors downwind notice odor and plumes; a fire's runoff and smoke carry chemicals well beyond the site.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: processes and chemicals

On site: ovens and fire protection

On site: environment

On site: people and records

Refer or decline if you find

  • Solvent coating oven with no vapor monitoring or ventilation interlock
  • Repeated tenter frame or duct fires
  • Wastewater permit violations or untreated discharge
  • Past or present use of persistent fluorinated repellents with no site assessment
  • No written terms for customers' goods
05 / Location

How UrbanStat data helps.

Floods at riverside mills reach chemical stores, dye kitchens and lagoons and carry them downstream. Wind strips wide roofs over ovens and wet halls, and shaking can rupture bulk chemical tanks.

FloodWindTornadoEarthquake
  • Flood scores at the address show whether chemical stores, lagoons and floor-level fabric at a riverside mill are exposed, which shapes both property and pollution terms.
  • Parcel and permit data reveal construction date and decades of permit history, a prompt to ask what processes and chemicals earlier occupants left behind.
  • Underwriting rules drawn as areas on the map automatically refer chemical-intensive plants located in flood plains when new business or renewals come in.
Flood · Wind · Tornado · Earthquake
06 / Public loss data · NAICS 313310

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

1.9 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Textile and fabric finishing mills
1.9
All private industry
2.3

0.4 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Textile and fabric finishing mills (NAICS 31331), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

2 fatal work injuries in 2024.

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Textile and Fabric Finishing Mills (NAICS 31331), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

53 citations from 16 inspections; 68% were classed serious, willful or repeat.

  • 1910.219 Mechanical power-transmission apparatus
    10
  • 1910.212 General requirements for all machines
    7
  • 1910.147 The control of hazardous energy (lockout/tagout)
    5
  • 1910.1200 Hazard communication
    5
  • 1910.132 General requirements (personal protective equipment)
    3

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Textile and Fabric Finishing Mills (NAICS 313310). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

11 facilities reported toxic chemical releases totaling 890,064 pounds on and off site.

  • Nitrate compounds
    793,248
  • Methanol
    40,922
  • Ammonia
    31,549

Chemicals released in the largest amounts, in pounds. 3 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Textile and Fabric Finishing Mills (NAICS 313310). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Equipment breakdown
Boilers, thermal oil heaters, tenter frame drives and wastewater blowers fail without fire and stop every range.
Pollution legal liability
General liability excludes most pollution, yet dye, solvent and repellent releases and legacy contamination are this business's largest exposure.
Bailee customers' goods
Customers' fabric often exceeds the mill's own stock, and contracts can make the finisher answer for it.
Contingent business interruption
A few dye, chemical and greige suppliers, and a few large customers, decide whether the mill can run.
Product recall
Failed flame retardancy or restricted chemicals found in finished fabric force brand recalls, and the cost is charged back to the finisher.

NAICS and SIC codes for textile finishing and coating mills

SystemCodeIndustry
NAICS 2022, primary313310Textile and Fabric Finishing Mills
NAICS 2022313320Fabric Coating Mills
NAICS 2022314110Carpet and Rug Mills
SIC 1987, primary2261Finishers of Broadwoven Fabrics of Cotton
SIC 19872262Finishers of Broadwoven Fabrics of Manmade Fiber and Silk
SIC 19872269Finishers of Textiles, NEC
SIC 19872295Coated Fabrics, Not Rubberized
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →