Skate manufacturersNAICS 339920 · SIC 3949
Skate manufacturers make ice, inline and quad roller skates by molding or lasting boots, stamping and grinding steel blades, casting urethane wheels and assembling frames and bearings. Users move fast on hard surfaces, so a blade, frame or wheel failure causes serious injury, and children are a large market.
NAICS 339920 Sporting and Athletic Goods ManufacturingSIC 3949 Sporting and Athletic Goods, NEC
Where losses come from.
- 01
Injury claims after blade, holder, frame, wheel or brake failures in use
- 02
Fires involving solvent adhesives, plastics, urethane chemicals and quench oil
- 03
Hand and arm injuries at presses, grinders, cutting dies and lasting machines
- PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Low, 1 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
- Heat-moldable composite boots and custom-fit scanning shift sales toward premium models, raising values in stock and the stakes of a defective lot.
- Growth in outdoor and recreational inline and quad skating brings more beginners and children, increasing falls blamed on product design or warnings.
- More production moves to contract factories abroad, so the brand owner carries product liability for parts it never sees made.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ElevatedBoot-making adhesives and solvents, injection-molded plastics, composite resins, heat-treat quench oil and cartoned stock give a mixed, moderately heavy fire load.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Solvent-based cements applied at open benches without extraction
- Oil quench tanks without lids or temperature limits
- Plastic boot shells and cartons racked high under ordinary sprinklers
- Flammable liquids dispensed from safety cans, bulk kept in a cut-off room
- Quench tank covers, high-temperature alarms and fixed suppression
- Sprinkler design checked against plastics storage
Business interruption
ElevatedInjection molds, blade dies and lasts are model-specific, and sales bunch into the pre-winter and holiday season.
How long and how costly a shutdown is.
- Molds held by one contract molder
- Missing the seasonal shipping window after a mid-year loss
- Mold inventory with ownership, location and insurance recorded
- Alternate molders and blade suppliers approved in advance
Premises liability
LowPlants have no public traffic apart from sponsored athletes and trade visitors.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Demo events or test rinks run by the manufacturer
- Waivers and event cover for demonstrations
Products and completed work
HighSkaters fall at speed when blades snap, holders crack, frames bend or wheels delaminate, and many wearers are children.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Imported components or complete skates sold under the insured's brand
- Aggressive, speed and hockey models stressed far beyond recreational use
- Adjustable children's skates with sliding or locking mechanisms
- Fatigue and impact testing of blades, frames and wheels by lot
- Hardness checks after heat treatment, with records kept
- Warnings on protective gear and maintenance, plus batch codes
Workers’ injury
ElevatedStamping presses, blade grinders, clicker presses and lasting machines injure hands; adhesives and isocyanates affect lungs and skin.
Injuries and illness to employees.
- Grinding and polishing without guards or dust capture
- Urethane casting with open isocyanate handling
- Light curtains or two-hand controls on presses
- Enclosed dispensing and air monitoring for isocyanates
Commercial auto
LowDistribution is by carrier; only sales and team-service staff drive.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Team service vans traveling with sharpening equipment
- Driving record checks for anyone with a company vehicle
Crime and theft
ModeratePremium hockey and figure skates carry high resale value and are easy to move online.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Finished stock staged on open docks
- Caged storage for premium lines and cycle counts
Inland marine and equipment
ModerateMolds sit at contractors, components arrive by sea, and sample lines travel to shows and teams.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Tooling overseas with no cover while at the molder
- Cargo and tooling cover written to match purchase terms
Environmental
ElevatedSolvent cements, urethane chemicals, quench oils, grinding sludge and any blade plating create regulated waste and emissions.
Pollution on or from the site or the work.
- Chrome or nickel plating of blades done in house
- Waste solvent and oily sludge stored outdoors
- Water-based adhesives where the bond allows
- Contained chemical storage and licensed waste removal
Cyber and data
ModerateOrder, design and machine data run on networks, and custom-fit services collect foot scans and buyers' personal details.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Direct-to-consumer web store or in-store foot scanning program
- Grinders and molding machines connected to the office network
- Hosted checkout and limited retention of scan data
- Production machines on a separate network with offline backups
Professional liability
LowProducts are sold, not advice; fitting and sizing guidance to dealers and teams adds little professional exposure.
Loss or injury caused by advice, design, testing, care or another professional service.
- Custom fitting or heat molding services sold to individual skaters
- Written fitting procedures trained for dealers who offer them
Umbrella and excess
HighA blade or frame failure at speed causes head and spinal injuries, often to children, and one defect repeats across a model.
How likely one liability event is to exhaust primary limits.
- Hockey and speed skates for elite and youth competitive use
- Large retail volumes of one children's adjustable model
- Helmets and protective gear sold under the same brand
- Batch coding that limits a recall to specific production runs
- Design review and testing before each new model or supplier
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Single-story steel or masonry light industrial buildings, often older, with press, grinding and molding areas beside cartoned finished goods and leather or synthetic stock.
- Occupancy
- Boot lasting with solvent cements, injection molding of shells and frames, blade stamping, heat treating with oil quench, grinding, urethane wheel casting and packing.
- Protection
- Sprinklers designed for plastics and cartoned stock, a cut-off flammable liquids room, protected quench tanks, dust collection at grinders and monitored alarms.
- Exposure
- Neighboring plants and outside yards of pallets, scrap and waste add fire exposure, and outdoor dust collectors can carry fire back into the building.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: products and testing
On site: processes and protection
On site: people and equipment
On site: records and history
Refer or decline if you find
- Imported skates rebranded with no testing by the insured
- No hardness or fatigue testing on blades and frames
- Open oil quench tank beside combustible storage
- Recurring claims on one model with no design change
How UrbanStat data helps.
A loss that closes the plant before the winter and holiday selling season costs most of a year's orders. Floor-level leather, cartons and steel coil are damaged by shallow flooding, and light roofs by wind and hail.
- Flood scores at the address show whether floor-level leather, cartons and press pits are exposed ahead of the seasonal stock build.
- Hail and wind scores for the site inform roof terms on light industrial buildings before a seasonal manufacturer's stock limits are raised.
- Parcel and permit data give the construction date and permit history, a check on whether heat-treat, molding or plating areas were added with approval.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
2.8 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.
0.9 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Sporting and athletic goods manufacturing (NAICS 33992), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
6 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Other Miscellaneous Manufacturing (NAICS 3399), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
94 citations from 24 inspections; 55% were classed serious, willful or repeat.
- 1910.134 Respiratory protection19
- 1910.1200 Hazard communication13
- 1910.107 Spray finishing using flammable and combustible materials5
- 1910.212 General requirements for all machines4
- 1910.151 Medical services and first aid4
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Sporting and Athletic Goods Manufacturing (NAICS 339920). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
30 facilities reported toxic chemical releases totaling 783,845 pounds on and off site.
- Zinc compounds630,596
- Benzo[g,h,i]perylene33,149
- Sodium nitrite30,600
Chemicals released in the largest amounts, in pounds. 18 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Sporting and Athletic Goods Manufacturing (NAICS 339920). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Product recall expense
- A cracked holder or weak frame on one model means pulling every unit from dealers and buyers.
- Equipment breakdown
- Presses, grinding machines and injection molders fail without fire and can miss the pre-winter shipping window.
- Ocean cargo
- Components and finished skates arrive by sea from contract factories, and molds travel to and from them.
- Sponsorship and event liability
- Demo days, athlete clinics and sponsored events put skaters and spectators on the maker's account.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.