---
title: "Skate manufacturers (NAICS 339920, SIC 3949): Industry Risk Guide"
description: "NAICS 339920 · SIC 3949. Skate manufacturers make ice, inline and quad roller skates by molding or lasting boots, stamping and grinding steel blades,…"
url: https://www.urbanstat.com/industry-risk-guides/skate-manufacturers-naics-339920/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Skate manufacturers NAICS 339920 · SIC 3949

Skate manufacturers make ice, inline and quad roller skates by molding or lasting boots, stamping and grinding steel blades, casting urethane wheels and assembling frames and bearings. Users move fast on hard surfaces, so a blade, frame or wheel failure causes serious injury, and children are a large market.

[**NAICS 339920** Sporting and Athletic Goods Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-339920) · [**SIC 3949** Sporting and Athletic Goods, NEC](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3949)

Manufacturing · Updated November 2026

Risk profile

1. [Property Elevated](#line-property)
2. [Business interruption Elevated](#line-bi)
3. [Premises liability Low](#line-gl)
4. [Products and completed work High](#line-products)
5. [Workers’ injury Elevated](#line-wc)
6. [Commercial auto Low](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment Moderate](#line-marine)
9. [Environmental Elevated](#line-env)
10. [Cyber and data Moderate](#line-cyber)
11. [Professional liability Low](#line-prof)
12. [Umbrella and excess High](#line-umbrella)

**Products and completed work.** Skaters fall at speed when blades snap, holders crack, frames bend or wheels delaminate, and many wearers are children.

Loss drivers

## Where losses come from.

1. Injury claims after blade, holder, frame, wheel or brake failures in use
2. Fires involving solvent adhesives, plastics, urethane chemicals and quench oil
3. Hand and arm injuries at presses, grinders, cutting dies and lasting machines

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Skate manufacturers, colored by its rating
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Low, 1 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Heat-moldable composite boots and custom-fit scanning shift sales toward premium models, raising values in stock and the stakes of a defective lot.
- Growth in outdoor and recreational inline and quad skating brings more beginners and children, increasing falls blamed on product design or warnings.
- More production moves to contract factories abroad, so the brand owner carries product liability for parts it never sees made.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: Elevated (3 of 5)

Boot-making adhesives and solvents, injection-molded plastics, composite resins, heat-treat quench oil and cartoned stock give a mixed, moderately heavy fire load.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Solvent-based cements applied at open benches without extraction
- Oil quench tanks without lids or temperature limits
- Plastic boot shells and cartons racked high under ordinary sprinklers

**Controls that matter**

- Flammable liquids dispensed from safety cans, bulk kept in a cut-off room
- Quench tank covers, high-temperature alarms and fixed suppression
- Sprinkler design checked against plastics storage

### Business interruption: Elevated (3 of 5)

Injection molds, blade dies and lasts are model-specific, and sales bunch into the pre-winter and holiday season.

Covers: How long and how costly a shutdown is.

**Watch for**

- Molds held by one contract molder
- Missing the seasonal shipping window after a mid-year loss

**Controls that matter**

- Mold inventory with ownership, location and insurance recorded
- Alternate molders and blade suppliers approved in advance

### Premises liability: Low (1 of 5)

Plants have no public traffic apart from sponsored athletes and trade visitors.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Demo events or test rinks run by the manufacturer

**Controls that matter**

- Waivers and event cover for demonstrations

### Products and completed work: High (4 of 5)

Skaters fall at speed when blades snap, holders crack, frames bend or wheels delaminate, and many wearers are children.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Imported components or complete skates sold under the insured's brand
- Aggressive, speed and hockey models stressed far beyond recreational use
- Adjustable children's skates with sliding or locking mechanisms

**Controls that matter**

- Fatigue and impact testing of blades, frames and wheels by lot
- Hardness checks after heat treatment, with records kept
- Warnings on protective gear and maintenance, plus batch codes

### Workers’ injury: Elevated (3 of 5)

Stamping presses, blade grinders, clicker presses and lasting machines injure hands; adhesives and isocyanates affect lungs and skin.

Covers: Injuries and illness to employees.

**Watch for**

- Grinding and polishing without guards or dust capture
- Urethane casting with open isocyanate handling

**Controls that matter**

- Light curtains or two-hand controls on presses
- Enclosed dispensing and air monitoring for isocyanates

### Commercial auto: Low (1 of 5)

Distribution is by carrier; only sales and team-service staff drive.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Team service vans traveling with sharpening equipment

**Controls that matter**

- Driving record checks for anyone with a company vehicle

### Crime and theft: Moderate (2 of 5)

Premium hockey and figure skates carry high resale value and are easy to move online.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Finished stock staged on open docks

**Controls that matter**

- Caged storage for premium lines and cycle counts

### Inland marine and equipment: Moderate (2 of 5)

Molds sit at contractors, components arrive by sea, and sample lines travel to shows and teams.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Tooling overseas with no cover while at the molder

**Controls that matter**

- Cargo and tooling cover written to match purchase terms

### Environmental: Elevated (3 of 5)

Solvent cements, urethane chemicals, quench oils, grinding sludge and any blade plating create regulated waste and emissions.

Covers: Pollution on or from the site or the work.

**Watch for**

- Chrome or nickel plating of blades done in house
- Waste solvent and oily sludge stored outdoors

**Controls that matter**

- Water-based adhesives where the bond allows
- Contained chemical storage and licensed waste removal

### Cyber and data: Moderate (2 of 5)

Order, design and machine data run on networks, and custom-fit services collect foot scans and buyers' personal details.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Direct-to-consumer web store or in-store foot scanning program
- Grinders and molding machines connected to the office network

**Controls that matter**

- Hosted checkout and limited retention of scan data
- Production machines on a separate network with offline backups

### Professional liability: Low (1 of 5)

Products are sold, not advice; fitting and sizing guidance to dealers and teams adds little professional exposure.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Custom fitting or heat molding services sold to individual skaters

**Controls that matter**

- Written fitting procedures trained for dealers who offer them

### Umbrella and excess: High (4 of 5)

A blade or frame failure at speed causes head and spinal injuries, often to children, and one defect repeats across a model.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Hockey and speed skates for elite and youth competitive use
- Large retail volumes of one children's adjustable model
- Helmets and protective gear sold under the same brand

**Controls that matter**

- Batch coding that limits a recall to specific production runs
- Design review and testing before each new model or supplier

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Single-story steel or masonry light industrial buildings, often older, with press, grinding and molding areas beside cartoned finished goods and leather or synthetic stock.
- **Occupancy**: Boot lasting with solvent cements, injection molding of shells and frames, blade stamping, heat treating with oil quench, grinding, urethane wheel casting and packing.
- **Protection**: Sprinklers designed for plastics and cartoned stock, a cut-off flammable liquids room, protected quench tanks, dust collection at grinders and monitored alarms.
- **Exposure**: Neighboring plants and outside yards of pallets, scrap and waste add fire exposure, and outdoor dust collectors can carry fire back into the building.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What are annual sales by skate type, and what share is sold for children?
- Do overseas suppliers carry product liability insurance naming the insured, and what limits apply?
- Which sales channels are used: dealers, teams, mass retailers or direct online?
- Does the business sponsor athletes, teams or events, or run demonstration sessions?
- How long would it take to replace the main molds, dies and lasts after a loss?

### Documents to request

- Loss runs with product claims detail
- Product test reports for blades, frames and wheels
- Supplier agreements and certificates of insurance
- Recall plan and batch coding procedure

### On site: products and testing

- Which models changed design, material or supplier since they were last tested?
- Which parts are made in house and which are imported or bought in?
- What strength and fatigue testing is done on blades, frames, holders and wheels?
- How are batches coded, and has any product been recalled?

### On site: processes and protection

- Which adhesives and solvents are used, and where are they stored and applied?
- Is heat treating done on site, and how is the quench tank protected?
- How is plastic and cartoned stock stored relative to sprinkler design?
- Are urethane wheels cast or blades plated on the premises?

### On site: people and equipment

- What guarding is fitted to presses, clickers and grinders?
- Where are molds and dies kept, and who owns and insures them?

### On site: records and history

- What product injury claims are open, and what do they have in common?
- What do loss runs show for fires and machine injuries?

### Refer or decline if you find

- Imported skates rebranded with no testing by the insured
- No hardness or fatigue testing on blades and frames
- Open oil quench tank beside combustible storage
- Recurring claims on one model with no design change

Location

## How UrbanStat data helps.

A loss that closes the plant before the winter and holiday selling season costs most of a year's orders. Floor-level leather, cartons and steel coil are damaged by shallow flooding, and light roofs by wind and hail.

Flood · Wind · Hail · Tornado

- Flood scores at the address show whether floor-level leather, cartons and press pits are exposed ahead of the seasonal stock build.
- Hail and wind scores for the site inform roof terms on light industrial buildings before a seasonal manufacturer's stock limits are raised.
- Parcel and permit data give the construction date and permit history, a check on whether heat-treat, molding or plating areas were added with approval.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Wind · Hail · Tornado

Public loss data · NAICS 339920

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**2.8** recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Sporting and athletic goods manufacturing

**2.8**

All private industry

**2.3**

0.9 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Sporting and athletic goods manufacturing (NAICS 33992), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**6** fatal work injuries in 2024.

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Other Miscellaneous Manufacturing (NAICS 3399), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**94** citations from 24 inspections; 55% were classed serious, willful or repeat.

- 1910.134 Respiratory protection **19**
- 1910.1200 Hazard communication **13**
- 1910.107 Spray finishing using flammable and combustible materials **5**
- 1910.212 General requirements for all machines **4**
- 1910.151 Medical services and first aid **4**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Sporting and Athletic Goods Manufacturing (NAICS 339920). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**30** facilities reported toxic chemical releases totaling **783,845 pounds** on and off site.

- Zinc compounds **630,596**
- Benzo[g,h,i]perylene **33,149**
- Sodium nitrite **30,600**

Chemicals released in the largest amounts, in pounds. 18 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Sporting and Athletic Goods Manufacturing (NAICS 339920). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Product recall expense**: A cracked holder or weak frame on one model means pulling every unit from dealers and buyers.
- **Equipment breakdown**: Presses, grinding machines and injection molders fail without fire and can miss the pre-winter shipping window.
- **Ocean cargo**: Components and finished skates arrive by sea from contract factories, and molds travel to and from them.
- **Sponsorship and event liability**: Demo days, athlete clinics and sponsored events put skaters and spectators on the maker's account.

## NAICS and SIC codes for skate manufacturers

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [339920](https://www.urbanstat.com/industry-risk-guides/naics/#naics-339920) | Sporting and Athletic Goods Manufacturing |
| SIC 1987, primary | [3949](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3949) | Sporting and Athletic Goods, NEC |

**Related business types**

- [Bicycle manufacturers NAICS 336991](https://www.urbanstat.com/industry-risk-guides/bicycle-manufacturers-naics-336991/)
- [Shoe manufacturers NAICS 316210](https://www.urbanstat.com/industry-risk-guides/shoe-manufacturers-naics-316210/)
- [Toy manufacturers NAICS 339930](https://www.urbanstat.com/industry-risk-guides/toy-manufacturers-naics-339930/)
- [Ice skating rinks NAICS 713940](https://www.urbanstat.com/industry-risk-guides/ice-skating-rinks-naics-713940/)
- [Roller skating rinks NAICS 713940](https://www.urbanstat.com/industry-risk-guides/roller-skating-rinks-naics-713940/)
- [Compare Skate manufacturers with Bicycle manufacturers](https://www.urbanstat.com/industry-risk-guides/compare/?a=skate-manufacturers-naics-339920&b=bicycle-manufacturers-naics-336991)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/skate-manufacturers-naics-339920/

- Page: Skate manufacturers (NAICS 339920, SIC 3949): Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/skate-manufacturers-naics-339920/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
