Silversmiths
Silversmiths form, solder, polish and plate silver and silver-plated hollowware, flatware and jewelry, from one-person studios to flatware factories, and often restore customers' heirlooms. Torches, buffing lint and plating chemicals sit beside valuable metal and pieces that belong to other people.
Where losses come from.
- 01
Theft of silver stock, finished pieces and customers' items left for repair
- 02
Fires from annealing torches, buffing lint and solvent cleaners
- 03
Burns, hand injuries, noise and chemical exposure at the bench and plating tanks
- PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: Moderate, 2 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: Moderate, 2 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Low, 1 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Elevated, 3 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: Moderate, 2 of 5; sector average 3.6; all business types 3.6.
- Silver prices swing widely, so stock and scrap values can rise sharply between renewals and leave limits short.
- Cyanide-free plating chemistries and closed-loop rinsing are spreading, cutting worker exposure and waste, though many small shops still run older cyanide baths.
- Online marketplaces and social media bring more restoration and commission work by post, increasing customers' property in transit and in the workshop.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ElevatedAnnealing and soldering torches, casting, lint-loaded buffing dust collectors and plating heaters are steady ignition sources in workshop buildings.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Buffing dust collectors and ducts with heavy lint build-up
- Immersion heaters in plastic plating tanks left on unattended
- Wooden benches and floors around annealing hearths
- Lint cleaned from collectors and ducts on a fixed schedule
- Low-level and over-temperature cut-outs on tank heaters
- Non-combustible hearth and bench surfaces at torches
Business interruption
ModerateHand tools and stakes are replaceable; dies, patterns and craft skill are the bottlenecks.
How long and how costly a shutdown is.
- Pattern dies for flatware lines held in one place
- Die and pattern records kept off site
Premises liability
LowWorkshops see few visitors; studios with a gallery or classes have modest public traffic.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Teaching workshops where students use torches and hammers
- Class size limits, eye protection and supervision
Products and completed work
ModerateFood-contact pieces raise lead-solder and plating residue concerns, and a handle or spout that parts from a hot teapot scalds.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Lead-bearing solder on food-contact items
- Replated antique pieces returned without disclosure of work done
- Lead-free solders and documented alloys for tableware
- Written description of restoration work given to the owner
Workers’ injury
ElevatedHammering, spinning and buffing bring noise, vibration, caught-in injuries and burns; cyanide baths and acids add toxic exposure.
Injuries and illness to employees.
- Polishing lathes without guards or with loose clothing nearby
- Spinning lathes operated without tool rests and shields
- Cyanide salts and acids stored together
- Hearing protection and vibration breaks for forming work
- Local exhaust and emergency eyewash at plating tanks
Commercial auto
LowA van or personal car for deliveries and craft shows at most.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Owner hauling stock to shows over long distances
- Business use declared on the vehicle policy, with trailer and load checks
Crime and theft
ElevatedSheet, casting grain and finished silver are valuable by weight, and scrap is easy to carry out and sell.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- No weighing of scrap and filings against metal issued
- Display pieces visible from the street after hours
- Safe for metal and finished work, with a monitored alarm
- Scrap collected, weighed and sent for refining under dual control
Inland marine and equipment
ElevatedCustomers' antiques in for repair or replating, plus stock taken to shows, are often worth more than the workshop.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Heirloom pieces accepted with no agreed value or receipt
- Exhibition stock left in vehicles or hotel rooms
- Photographed intake receipts with agreed values
- Bailee and exhibition cover with per-item limits
Environmental
ElevatedSilver cyanide plating, stripping acids, pickling baths and metal-laden rinse water are regulated wastes whatever the shop size.
Pollution on or from the site or the work.
- Rinse water discharged without treatment
- Old plating tanks on bare concrete with no containment
- Waste treatment or licensed haulage with manifests kept
- Diked tank area with separated acid and cyanide storage
Cyber and data
ModerateStudios sell online and at shows with card readers; larger flatware makers run ordering systems that ransomware would stop.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Own web store or marketplace shop holding customer and commission details
- Hosted card payments and off-site backups of designs and orders
Professional liability
LowCraft and repair work, not advice; restoration damage falls under customers' property and workmanship rather than professional error.
Loss or injury caused by advice, design, testing, care or another professional service.
- Written valuations of antique silver provided to owners or insurers
- Valuations referred to independent appraisers
Umbrella and excess
ModerateLiability exposures are modest; a cyanide release or fire spreading into a shared building is the realistic severe case.
How likely one liability event is to exhaust primary limits.
- Cyanide plating in mixed-use buildings with residents or schools nearby
- Plating confined to a ventilated, diked room with acids kept apart
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Small studios in older brick or frame workshop buildings on mixed-use streets, up to larger flatware plants in single-story industrial buildings with press and plating halls.
- Occupancy
- Annealing and soldering torches, casting, spinning and stamping, buffing that throws lint and metal dust, and heated cyanide plating and acid pickling tanks.
- Protection
- Monitored smoke and intrusion alarms, sprinklers in larger plants, cleaned dust collectors, tank heaters with cut-outs, separate acid and cyanide storage, and a safe for metal and customers' pieces.
- Exposure
- Workshops on mixed-use streets share walls with shops and homes, so a plating spill or torch fire affects neighbors, and street-visible displays invite break-ins.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: work and equipment
On site: workshop
On site: security and custody
On site: records and history
Refer or decline if you find
- Plating tank heaters without low-level cut-outs left on overnight
- Customers' valuables accepted without receipts or agreed values
- Cyanide and acids stored on the same shelving
- No safe for silver stock
How UrbanStat data helps.
Silver stock and customers' heirlooms make the neighborhood burglary picture central. Ground-floor and basement workshops with plating tanks add a pollution release if flooded, and shelving of finished hollowware suffers in an earthquake.
- Crime scores at the address inform safe and alarm conditions for workshops holding silver stock and customers' heirlooms.
- Flood scores at the address show whether plating tanks and chemical stores at ground or basement level could be inundated and release their contents.
- Parcel and permit data give the construction date and permit history of older workshop buildings, a check on wiring and ventilation upgrades.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
2.0 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.
0.6 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Other miscellaneous manufacturing (NAICS 3399), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
6 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Other Miscellaneous Manufacturing (NAICS 3399), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
32 citations from 8 inspections; 75% were classed serious, willful or repeat.
- 1910.1200 Hazard communication9
- 1910.134 Respiratory protection4
- 1910.212 General requirements for all machines3
- 1910.1000 Air contaminants2
- 1910.132 General requirements (personal protective equipment)2
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Jewelry and Silverware Manufacturing (NAICS 339910). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
15 facilities reported toxic chemical releases totaling 7,415 pounds on and off site.
- Dichloromethane6,202
- Ammonia1,205
- Silver7
Chemicals released in the largest amounts, in pounds. 1 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Jewelry and Silverware Manufacturing (NAICS 339910). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Bailee customers' property
- Heirlooms left for repair or replating are often worth more than the workshop and its own stock.
- Jewelers block
- Silver jewelry and finished pieces on premises and in transit need cover written for precious goods.
- Exhibition floater
- Stock taken to craft fairs and shows sits in vehicles, hotels and open stands for days.
- Equipment breakdown
- Spinning lathes, presses, rectifiers and tank heaters fail without fire and stop production.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.