Semiconductor manufacturersNAICS 334413 · SIC 3674

Semiconductor manufacturers build integrated circuits on silicon wafers in cleanrooms, using hundreds of process steps with toxic, corrosive and pyrophoric gases. Enormous value sits in a small space, and a brief fire, leak, power dip or contamination event scraps wafers and idles tools for months.

NAICS 334413 Semiconductor and Related Device ManufacturingSIC 3674 Semiconductors and Related Devices

Manufacturing · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Cleanroom contamination from small fires, smoke, leaks or water spreading through recirculated air

  2. 02

    Loss of power, ultrapure water or process gases scrapping wafers in progress

  3. 03

    Long requalification and tool replacement times after any damage

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: Severe, 5 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: Severe, 5 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Low, 1 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Elevated, 3 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: High, 4 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: High, 4 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: High, 4 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • New fabs are going up in places with little chipmaking history, where tool installers, gas suppliers and experienced fire responders are scarce.
  • Advanced packaging and stacked chips add process steps and handoffs between sites, so a fire at one packaging plant now stalls many customers' products.
  • Pressure to cut fluorinated chemicals and water use brings new process chemistry and recycling plant, adding change risk to tightly controlled lines.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Severe
Plastic wet benches, pyrophoric and flammable gases and tools worth fortunes share recirculated air, so a small fire becomes a huge loss.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Combustible plastic wet benches and exhaust ducts without internal protection
  • Silane and hydrogen supply lacking automatic shut-off and leak detection
  • Cleanroom wall and ceiling panels with combustible cores
Controls that matter
  • Fire-safe bench materials or fixed suppression inside benches and ducts
  • Gas cabinets with detection, excess-flow valves and automatic isolation
  • Very early smoke detection sampling the return air

Business interruption

Severe
One fab supplies customers with no alternative source, lithography and deposition tools take a year or more to replace, and restart needs requalification.

How long and how costly a shutdown is.

Watch for
  • A single site producing a node or product family
  • Dependence on one utility feed, gas plant or water source
  • Customer contracts with supply guarantees
Controls that matter
  • Dual power feeds with ride-through for critical tools
  • Recovery plans agreed with tool makers and cleanroom contractors
  • Qualified second fab or foundry for key products

Premises liability

Moderate
The public stays out, but a toxic gas release or chemical spill can force evacuation of neighboring properties.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Housing, schools or offices close to the bulk gas pad
  • Bulk chemical deliveries crossing public roads on site
Controls that matter
  • Fence-line gas monitoring and a rehearsed community alert plan
  • Scrubbers sized for worst-case releases

Products and completed work

Elevated
Chips rarely injure anyone directly, but a latent defect in automotive, medical or industrial parts triggers expensive recalls.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Chips sold for safety-critical vehicle or medical use
  • Contracts accepting recall or line-down costs without a cap
Controls that matter
  • Wafer-lot traceability through packaging and test
  • Liability caps and application limits written into sales terms

Workers’ injury

Elevated
Arsine, phosphine, hydrofluoric acid and solvents are deadly in small amounts, though engineering controls keep actual injury rates low.

Injuries and illness to employees.

Watch for
  • Maintenance crews opening tools and gas lines
  • Contractors working in subfloor and utility levels
Controls that matter
  • Lockout, purge and gas-detection procedures for every tool intervention
  • On-site emergency response team and first aid for acid burns

Commercial auto

Low
Staff seldom drive for work and product ships by specialist carrier.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Shuttle vans running between sites on a campus
Controls that matter
  • Hired and non-owned auto cover for incidental driving

Crime and theft

Elevated
Finished chips and wafers are tiny, extremely valuable and traceable only with effort, and process know-how is worth stealing.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Finished goods handled outside a secured, counted area
  • Scrap wafers and rejected die leaving without destruction
Controls that matter
  • Vaulted finished goods with access logs and reconciliation
  • Certified destruction of scrap and controls on design data

Inland marine and equipment

High
Wafers and tools in transit are fragile and worth a great deal per crate, and new tools are insured through rigging and installation.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Tool move-in handled without specialist riggers
  • Air shipments of wafers between fab, packaging and test sites
  • Photomasks with no duplicates held elsewhere
Controls that matter
  • Shock, tilt and humidity recorders on every tool and wafer shipment
  • Transit and installation limits set per tool value

Environmental

High
Hydrofluoric acid, solvents, arsenic and fluorinated compounds flow through large wastewater and exhaust treatment systems every hour.

Pollution on or from the site or the work.

Watch for
  • Older sites with historic solvent contamination in groundwater
  • Double-contained piping and trenches with no leak monitoring
  • Wastewater treatment near capacity as production grows
Controls that matter
  • Monitored secondary containment for chemical distribution and waste lines
  • Continuous monitoring of fluoride, metals and pH before discharge
  • Exhaust abatement on every toxic and fluorinated gas process

Cyber and data

High
Tools, recipes and wafer tracking run on connected systems, so ransomware or tampering halts the fab, and chip designs attract theft.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Tool makers with standing remote access to production equipment
  • Older tool controllers running unsupported operating systems
  • Customer design files copied across many internal systems
Controls that matter
  • Production network segmented from office systems, with monitored vendor access
  • Malware scanning of every file and portable drive entering the fab
  • Customer design data held in restricted, logged environments

Professional liability

Moderate
Foundries supply design rules, circuit libraries and process advice, and a customer can claim lost revenue when chips miss their specification.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Design services or licensed circuit blocks sold alongside wafer production
  • Yield or performance commitments written into customer agreements
Controls that matter
  • Contracts limiting liability to the price of the affected wafers
  • Design-rule and library changes released only after documented qualification

Umbrella and excess

Elevated
A latent defect in chips for vehicles or medical devices, or a toxic gas release into nearby homes, can exceed primary limits.

How likely one liability event is to exhaust primary limits.

Watch for
  • Safety-critical automotive or implantable medical applications
  • Housing or schools within reach of a toxic gas release
Controls that matter
  • Application restrictions and liability caps in sales terms
  • Toxic gas inventories kept to a minimum, with scrubbed exhaust
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Large steel-frame fabs with the cleanroom set between a subfab utility level and an air-handling plenum, long-span roofs, and wall and ceiling panels that may have combustible cores.
Occupancy
Plastic wet benches, silane, hydrogen, toxic dopant gases, solvents and acids feed hundreds of tools under recirculated air that carries smoke across the whole cleanroom.
Protection
Sprinklers above and below the cleanroom, suppression inside benches and exhaust ducts, air-sampling smoke detection, gas cabinets with automatic isolation and an on-site emergency team.
Exposure
Fabs cluster in science parks beside suppliers, gas plants and other fabs; the bulk gas pad, chemical yard and any nearby housing set the off-site exposure.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: fab and products

On site: cleanroom fire protection

On site: utilities and recovery

On site: environment and people

Refer or decline if you find

  • Combustible wet benches with no internal fire suppression
  • Pyrophoric gas supply without automatic shut-off on leak detection
  • Single utility feed with no ride-through for critical tools
  • Known groundwater contamination with no funded remediation plan
  • Sole fab for a product with no qualified alternative
05 / Location

How UrbanStat data helps.

Fabs cluster in a few regions, several of them seismic. Shaking misaligns tools and breaks quartz and gas lines even when the building stands. Power or water loss after a storm scraps wafers, and wildfire smoke loads air filtration.

EarthquakeFloodHurricaneWindWildfire
  • Earthquake scores at the address inform terms where modest shaking misaligns lithography tools and ruptures gas and chemical lines.
  • Street-by-street exposure views show total insured value across a fab, its neighbors and its suppliers in one science park, with alerts at a set threshold.
  • Live event overlays during a hurricane or wildfire show which fabs and supplier sites are in the path, where losing power or water scraps wafers in process.
Earthquake · Flood · Hurricane · Wind
06 / Public loss data · NAICS 334413

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

0.8 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.

Semiconductor and related device manufacturing
0.8
All private industry
2.3

0.3 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Semiconductor and related device manufacturing (NAICS 334413). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

9 fatal work injuries in 2024.

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Computer and Electronic Product Manufacturing (NAICS 334), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

36 citations from 14 inspections; 47% were classed serious, willful or repeat.

  • 1910.147 The control of hazardous energy (lockout/tagout)
    6
  • 1910.1200 Hazard communication
    4
  • 1910.305 Wiring methods, components, and equipment for general use
    4
  • 1910.134 Respiratory protection
    3
  • 1910.132 General requirements (personal protective equipment)
    2

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Semiconductor and Related Device Manufacturing (NAICS 334413). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

92 facilities reported toxic chemical releases totaling 3.8 million pounds on and off site.

  • Nitrate compounds
    1.6M
  • Ammonia
    771,297
  • Zinc compounds
    289,636

Chemicals released in the largest amounts, in pounds. 17 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Semiconductor and Related Device Manufacturing (NAICS 334413). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Contingent business interruption
A fire or outage at a sole gas, chemical, wafer or packaging supplier stops output as surely as damage at the fab.
Utility service interruption
Off-site loss of power, water or gas stops the fab, and ordinary interruption cover responds only to damage on site.
Equipment breakdown
Lithography, deposition and etch tools fail electrically or mechanically without fire, and replacements take many months.
Product recall
Automotive and device makers pass back the cost of tracing and replacing parts built with a defective wafer lot.
Pollution legal liability
Solvent, fluoride and metal releases to groundwater or air fall outside general liability and are slow to clean up.

NAICS and SIC codes for semiconductor manufacturers

SystemCodeIndustry
NAICS 2022, primary334413Semiconductor and Related Device Manufacturing
SIC 1987, primary3674Semiconductors and Related Devices
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →