Printing ink manufacturersNAICS 325910 · SIC 2893

Printing ink manufacturers disperse pigments and carbon black into varnishes, resins and solvents, then mill, let down and color-match the ink for packaging, publication, textile and digital printers; some make inkjet fluids and toner. Solvent-based liquid inks, heated varnish kettles and fine powders create the fire hazard, and food-packaging uses raise product stakes.

NAICS 325910 Printing Ink ManufacturingSIC 2893 Printing InkNAICS 325992 Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

Manufacturing · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Solvent vapor fires at mixers, mills and filling points for flexographic and gravure inks

  2. 02

    Ink that sets off, fades, migrates or mismatches, spoiling a customer's whole print run

  3. 03

    Solvent, pigment and wash-up waste escaping to drains and ground

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Elevated, 3 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: High, 4 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Packaging printers are moving from solvent to water-based and energy-curable inks, lowering fire load but adding acrylate sensitization and migration concerns.
  • Publication ink demand keeps shrinking while digital and inkjet printing grows, pushing ink makers into fine-particle fluids and toners with combustible dust hazards.
  • Food-contact packaging rules are tightening, so mineral oils and some photoinitiators are being removed, and brand owners pass recall costs back to ink suppliers.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

High
Liquid inks are largely alcohol, acetate or hydrocarbon solvent, often with nitrocellulose resin, mixed in open or portable vessels.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Nitrocellulose resin or chips stored and dissolved on site
  • Varnish cooked in direct-fired or thermal oil kettles
  • Oily rags and carbon black residues left to self-heat
Controls that matter
  • Solvent ink production in a sprinklered, ventilated cutoff area
  • Bonding, grounding and rated electrics at mixers and mills
  • Closed metal waste cans emptied at the end of each shift

Business interruption

Elevated
Mills and mixers are replaceable, yet printers need matched colors within hours and will switch supplier quickly.

How long and how costly a shutdown is.

Watch for
  • A few large packaging printers taking most of the output
  • Color formulas held only on local systems
Controls that matter
  • Formula database backed up off site
  • Sister plants or toll makers able to match key colors

Premises liability

Moderate
Trade-only premises, but staff work inside customers' pressrooms running in-plant ink rooms.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Technicians stationed at printers' plants handling solvents
Controls that matter
  • Contracts defining responsibility for in-plant ink room safety

Products and completed work

Elevated
Ink is a small cost in a large print job, so a defect costs many times its price, more so on food packaging.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Inks for food, pharmaceutical or toy packaging with migration limits
  • Ultraviolet-curable inks where uncured components can transfer
  • Custom color matching approved verbally
Controls that matter
  • Low-migration formulations with documented raw material compliance
  • Signed color approvals and retained batch samples
  • Sales terms limiting liability for consequential print losses

Workers’ injury

Elevated
Three-roll mills catch fingers, solvents and acrylates irritate and sensitize, and drums and pails are handled all day.

Injuries and illness to employees.

Watch for
  • Mill rolls cleaned while turning
  • Acrylate monomers handled with bare hands
Controls that matter
  • Nip guards and emergency stops on every mill
  • Gloves chosen for acrylates, with skin checks
  • Drum handlers and pail lifts at filling stations

Commercial auto

Elevated
Daily van and truck deliveries of flammable inks to printers, often on short notice.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Rush orders delivered by untrained staff in personal vehicles
Controls that matter
  • Hazardous goods training and vehicles fitted for securing drums

Crime and theft

Low
Ink and raw materials are not resale targets, and customers pay on account.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Inventory shrinkage of costly specialty pigments
Controls that matter
  • Periodic stock counts of high-value pigments

Inland marine and equipment

Moderate
Dispensing systems and consigned ink stock sit in customers' pressrooms, outside the insured's own protection.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Blending dispensers and bulk totes placed at many printers
Controls that matter
  • Location schedule and written agreements for consigned stock and equipment

Environmental

High
Solvent tank storage, pigment metals and wash-up waste create contamination, and solvent air emissions are closely permitted.

Pollution on or from the site or the work.

Watch for
  • Underground solvent tanks or drum storage on bare ground
  • Wash-up solvent and sludge with no disposal trail
Controls that matter
  • Bulk and drum storage on sealed, curbed surfaces
  • Solvent recovery still and manifests for all hazardous waste

Cyber and data

Elevated
Color formulas, matching software and networked dispensers in customers' pressrooms keep supply moving; losing them halts color matching within hours.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Formula database on one server with no offline copy
  • Remote links from the plant into dispensers at customers' sites
Controls that matter
  • Offline, tested backups of the formula database
  • Remote access to dispensers limited, logged and protected by multifactor sign-in

Professional liability

Moderate
Technicians run customers' ink rooms and advise on ink choice for food packaging, so bad advice spoils print runs or breaches migration limits.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Compliance statements for food-contact packaging issued by sales staff
Controls that matter
  • Compliance statements issued only by technical staff, based on documented testing

Umbrella and excess

Elevated
A delivery crash with flammable ink or a migration problem across a food brand's packaging can exceed primary limits.

How likely one liability event is to exhaust primary limits.

Watch for
  • Large volumes of food or pharmaceutical packaging ink
  • Own trucks carrying solvent inks on busy urban routes
Controls that matter
  • Supply terms that limit liability for consequential print and recall losses
  • Driver training and vehicle standards for hazardous loads
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Often older masonry or steel buildings in urban industrial areas close to printers, with mezzanine mills, tank rooms and drum stores added piecemeal.
Occupancy
Pigment, carbon black and resin dispersed in alcohol, acetate or hydrocarbon solvents, varnish cooked in heated kettles, oily wastes that can self-heat, and fine toner powder that explodes as a dust cloud.
Protection
Sprinklers designed for flammable liquids in solvent areas, a cutoff mixing room with rated electrics, grounding at every transfer, and dust collection at powder charging.
Exposure
Multi-tenant blocks and neighboring printers share walls and drains with a flammable liquids occupancy, so a fire or spill moves quickly between tenants.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: production and customers

On site: fire protection

On site: people and environment

On site: quality and history

Refer or decline if you find

  • Nitrocellulose stored loose in the production area
  • Solvent ink mixing in a building with no sprinklers
  • Food-packaging inks sold with no migration testing
  • Open pails of solvent used for wash-up at every mill
05 / Location

How UrbanStat data helps.

Ink plants occupy older urban industrial buildings near their printers, often with shared walls and drains. Flood or earthquake that upsets solvent tanks, totes and drum racks produces a spill and a fire hazard together.

FloodEarthquake
  • Parcel and permit data give the building's construction date and permit history, useful where solvent ink production occupies an older multi-tenant industrial block.
  • Flood and earthquake scores at the address show how exposed solvent tanks, totes and drum racks are to being floated or toppled.
  • Street-by-street exposure views show which other insured tenants share the block with a flammable liquids occupancy, with alerts when accumulation passes a set limit.
Flood · Earthquake
06 / Public loss data · NAICS 325910

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

2.0 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Printing ink manufacturing
2.0
All private industry
2.3

0.4 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Printing ink manufacturing (NAICS 32591), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

4 fatal work injuries in 2024.

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Other Chemical Product and Preparation Manufacturing (NAICS 3259), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

20 citations from 4 inspections; 80% were classed serious, willful or repeat.

  • 1910.178 Powered industrial trucks
    5
  • 1910.132 General requirements (personal protective equipment)
    2
  • 1910.138 Hand protection
    2
  • 1910.1200 Hazard communication
    2
  • 1910.37 Maintenance, safeguards, and operational features for exit routes
    1

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Printing Ink Manufacturing (NAICS 325910). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

47 facilities reported toxic chemical releases totaling 217,399 pounds on and off site.

  • Toluene
    106,951
  • N-methyl-2-pyrrolidone
    63,062
  • Certain glycol ethers
    27,122

Chemicals released in the largest amounts, in pounds. 5 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Printing Ink Manufacturing (NAICS 325910). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Pollution legal liability
Solvent tanks, pigment metals and wash-up waste leave soil and groundwater contamination that standard policies exclude.
Product recall
Ink that fails migration limits can force a food brand to pull packaged product from shelves and charge it back.
Equipment breakdown
Bead mills, three-roll mills and high-speed dispersers fail mechanically and stop production of key colors.
Contingent business interruption
Specialty pigments, resins and curing chemicals come from a handful of producers, some of them overseas.

NAICS and SIC codes for printing ink manufacturers

SystemCodeIndustry
NAICS 2022, primary325910Printing Ink Manufacturing
NAICS 2022325992Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing
SIC 1987, primary2893Printing Ink
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →