Precast concrete product manufacturersNAICS 327390 · SIC 3272
Precast plants batch concrete, pour it into steel or timber forms around reinforcement or tensioned strand, cure it and truck the pieces to site; block, pipe and bagged-mix plants work similarly. The plant rarely burns; claims come from very heavy lifts, oversize road loads and structural elements that must perform for decades.
NAICS 327390 Other Concrete Product ManufacturingSIC 3272 Concrete Products, Except Block and BrickNAICS 327332 Concrete Pipe ManufacturingNAICS 327331 Concrete Block and Brick Manufacturing+2 more codes
Where losses come from.
- 01
Workers crushed or struck while stripping, lifting, stacking and loading heavy pieces
- 02
Structural or watertightness failures of installed elements traced to design, strength or reinforcement
- 03
Road accidents involving heavy, oversize loads on the way to site
- PropertyProperty: Moderate, 2 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Elevated, 3 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: High, 4 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Elevated, 3 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
- Prefabricated and modular building is moving more structural work into precast plants, so a single plant's design and quality errors reach more buildings.
- Lower-carbon mixes, carbon-cured block and recycled aggregate are spreading, and new mixes bring early-strength and durability questions before long track records exist.
- Automated shuttering robots, scanning and digital piece tracking improve traceability, but add networked controls and costly equipment to formerly simple casting sheds.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ModerateConcrete, steel forms and aggregates do not burn; fire load is confined to timber forms, release oils and offices.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Carpentry shop building timber forms inside the main plant
- Foam void formers and insulation boards stored in bulk
- Steam boilers or curing heaters with poor maintenance
- Form shop separated, with dust extraction and hot work control
- Foam and form oil stored away from production
- Boiler inspection and burner servicing on schedule
Business interruption
ElevatedBatch plant, gantry cranes and casting beds are the bottlenecks, and project contracts carry delay penalties.
How long and how costly a shutdown is.
- One batching plant feeding every bed
- Custom forms for a single large project
- Service contracts and spares for mixer and cranes
- Ability to buy ready-mixed concrete while the batch plant is down
Premises liability
ElevatedDeliveries and, for many firms, erection put heavy pieces over active construction sites and public roads.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Own crews erecting panels, beams or stairs
- Unloading in streets with pedestrians and overhead lines
- Children drawn to pipe and culvert storage yards
- Lift plans and exclusion zones for every site unload or erection
- Clear contract split between supplier, erector and general contractor
- Fenced storage yard with stacks blocked against rolling
Products and completed work
HighBeams, planks, wall panels and tanks carry structural or containment loads; a hidden flaw can bring down a floor.
Harm caused by what the business sells, serves, makes, installs or repairs.
- In-house structural design or connection detailing
- Parking structures, bridges and stadium seating units
- Lifting inserts and anchors that fail during handling by others
- Cylinder tests, strand tension records and pre-pour inspections kept per piece
- Design reviewed and sealed by a qualified engineer
- Each piece marked with cast date and traceable mix
Workers’ injury
HighMulti-ton pieces are stripped, turned and stacked daily, tensioned strand stores lethal energy, and cutting and finishing raise silica dust.
Injuries and illness to employees.
- Staff standing behind stressing jacks or in line with tensioned strand
- Pieces stored on edge without racks or bracing
- Dry cutting or grinding of cured concrete
- Guarded stressing ends with nobody in the line of fire
- Rated lifting inserts, rigging inspections and trained crane operators
- Wet cutting and extraction for sawing and finishing
Commercial auto
HighTractor-trailers haul heavy, tall or over-length pieces every day, often on special routes and into tight sites.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Permit loads with escorts
- Panels carried upright on A-frame trailers in wind
- Subcontract haulers with unverified insurance
- Experienced heavy-haul drivers with route surveys for oversize loads
- Engineered load securing and pre-trip checks signed off
- Certificates and contracts for every outside carrier
Crime and theft
LowFinished products cannot be carried off; exposure is fuel, reinforcing steel and tools.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Strand, reinforcing bar and copper stored in an open yard
- Yard fencing, lighting and cameras
Inland marine and equipment
ElevatedPieces are at risk on the truck and during lifting into place, and forms, cranes and loaders are significant values.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Single pieces whose loss would delay a whole project
- Mobile cranes and straddle carriers owned by the plant
- Transit and installation cover with limits matching the largest unit
- Scheduled mobile equipment with inspection records
Environmental
ModerateWash water is strongly alkaline, and the site stores form oil, curing compounds, admixtures and diesel.
Pollution on or from the site or the work.
- Washout running to storm drains or a watercourse
- Fuel tanks without secondary containment
- Recycling system for wash water and returned concrete
- Diked fuel and admixture storage
Cyber and data
ModerateProduction planning, shop drawings and batching run on office networks; an outage delays pours, but little personal data is held.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Shop drawings and piece records held only on one server
- Batch and curing controls reachable from the office network
- Offline backups of drawings, mix designs and piece records
- Separate network for batch and curing controls
Professional liability
ElevatedMany plants design pieces, connections and lifting inserts in-house, so a design error is a professional claim as well as a product one.
Loss or injury caused by advice, design, testing, care or another professional service.
- Delegated design of structural members and connections
- Engineers on staff sealing drawings for others' projects
- Independent check of calculations by a second engineer
- Contracts defining the design scope and limiting liability
Umbrella and excess
HighA collapsed parking deck, a dropped panel over a street or an oversize-load crash can injure many people at once.
How likely one liability event is to exhaust primary limits.
- Parking structures, stadium seating and bridge girders
- Erection over occupied buildings or open traffic
- Engineered lift plans and street closures for erection
- Outside design review for structures open to the public
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Long steel-frame casting sheds with overhead gantry cranes, open casting beds and large outdoor stacking yards, plus a batch plant with silos and a timber form shop.
- Occupancy
- Concrete, steel forms and strand do not burn; fuel comes from timber forms, foam void formers, form oil, curing heaters and boilers, and packaging at bagged-mix lines.
- Protection
- Form shop and foam storage separated and sprinklered, boilers inspected, hot work permits for welding on forms and reinforcement, and a fenced, lit yard with cameras.
- Exposure
- Industrial land near highways or rail, often low-lying; stacked pieces and tall panel racks can topple onto neighbors' fences, and dust and noise reach nearby homes.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: products and quality
On site: plant and yard
On site: delivery and erection
On site: records
Refer or decline if you find
- Structural design done in-house with no qualified engineer's review
- No strength test or stressing records kept per piece
- Workers in line with strand during tensioning
- Erection work performed without lift plans
- Panels stored on edge without racks or bracing
How UrbanStat data helps.
Yards hold months of finished pieces outdoors, tall panels stand on racks that wind or shaking can topple, and batch plants with cement silos sit on low industrial ground prone to flooding.
- Flood scores at the address show whether the batch plant, cement silos and casting beds are exposed on the low-lying industrial land these plants favor.
- Wind and earthquake scores for the site indicate how exposed racked wall panels, gantry cranes and silos are to toppling.
- Parcel and permit data give building age, value and permit history, useful for checking crane runway, boiler and batch plant additions against what was declared.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
4.9 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.
1.6 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Other concrete product manufacturing (NAICS 32739), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
6 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Other Concrete Product Manufacturing (NAICS 32739), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
541 citations from 111 inspections; 63% were classed serious, willful or repeat.
- 1910.134 Respiratory protection55
- 1910.1053 Respirable crystalline silica47
- 1910.1200 Hazard communication46
- 1910.178 Powered industrial trucks32
- 1910.147 The control of hazardous energy (lockout/tagout)23
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Other Concrete Product Manufacturing (NAICS 327390). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
166 facilities reported toxic chemical releases totaling 110,436 pounds on and off site.
- Hydrochloric acid24,205
- Styrene22,685
- Certain glycol ethers16,480
Chemicals released in the largest amounts, in pounds. 73 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Other Concrete Product Manufacturing (NAICS 327390). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Equipment breakdown
- Gantry cranes, batch mixers, block machines and curing boilers fail without fire and halt production.
- Installation floater
- Pieces remain at the plant's risk while being lifted, set and connected on site.
- Product recall or rip-and-tear
- Replacing defective planks or panels inside a finished structure costs far more than the pieces themselves.
NAICS and SIC codes for precast concrete product manufacturers
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 327390 | Other Concrete Product Manufacturing |
| NAICS 2022 | 327332 | Concrete Pipe Manufacturing |
| NAICS 2022 | 327331 | Concrete Block and Brick Manufacturing |
| NAICS 2022 | 327999 | All Other Miscellaneous Nonmetallic Mineral Product Manufacturing |
| SIC 1987, primary | 3272 | Concrete Products, Except Block and Brick |
| SIC 1987 | 3271 | Concrete Block and Brick |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.