Metal ore mines
Metal ore mines blast and haul rock from open pits or underground stopes, then crush, grind and treat it with flotation reagents, cyanide or acid to recover copper, gold, iron, zinc and other metals. Single processing lines, huge mobile fleets and tailings dams holding decades of waste drive the largest losses.
Where losses come from.
- 01
Tailings dam failures and cyanide or acid releases that reach rivers, farmland and towns downstream
- 02
Breakdowns and fires in the grinding mill, conveyors or solvent extraction plant that stop all production
- 03
Ground falls, haul truck collisions and mill entanglement injuring miners and contractors
- PropertyProperty: High, 4 of 5; sector average 3.4; all business types 2.9.
- Business interruptionBusiness interruption: Severe, 5 of 5; sector average 3.7; all business types 2.7.
- Premises liabilityPremises liability: High, 4 of 5; sector average 3.6; all business types 2.7.
- Products and completed workProducts and completed work: Moderate, 2 of 5; sector average 2.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 4.1; all business types 3.0.
- Commercial autoCommercial auto: Elevated, 3 of 5; sector average 3.3; all business types 2.5.
- Crime and theftCrime and theft: Elevated, 3 of 5; sector average 2.2; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: High, 4 of 5; sector average 3.8; all business types 2.6.
- EnvironmentalEnvironmental: Severe, 5 of 5; sector average 3.9; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.5; all business types 2.7.
- Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.3; all business types 2.0.
- Umbrella and excessUmbrella and excess: Severe, 5 of 5; sector average 4.5; all business types 3.6.
- Autonomous haul trucks and drills remove people from the pit, cutting some injury exposure but raising equipment values and dependence on networks and remote operations centers.
- After several catastrophic tailings failures worldwide, stricter dam standards, independent reviews and public disclosure are now expected, and dams that fall short face retrofit or closure.
- Demand for copper, nickel and cobalt for batteries and power grids is opening new mines in remote, wildfire-prone or water-stressed areas with short operating histories.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
HighConveyor belts, mill motors, transformers and solvent extraction plants using kerosene-type diluent burn hot and sit in remote, lightly protected sites.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Solvent extraction tanks and settlers without foam suppression or fire walls
- Slope movement in pit walls near the crusher, conveyors or plant
- Transformers and motor control rooms without fire separation or detection
- Fixed foam or deluge over solvent extraction areas, with a trained emergency response team
- Radar and prism monitoring of pit slopes with trigger action plans
- Thermal surveys of conveyors, motors and switchgear on a routine schedule
Business interruption
SevereOre flows through one hoist or crusher, one grinding line and one tailings facility; a failed mill drive takes many months to replace.
How long and how costly a shutdown is.
- Gearless mill drives or large motors with no spare and long lead times
- A single power line, water supply or access road into the site
- Tailings capacity running short, which can halt milling by order
- Critical spares register covering mill motors, gears, liners and transformers
- Ore stockpiles and backup power supply sized for realistic outages
- Engineered tailings expansion planned well ahead of capacity
Premises liability
HighA tailings breach can bury homes and roads downstream, and blasting, dust and ore trucks affect nearby communities.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Communities, roads or water intakes downstream of tailings or waste dumps
- Upstream-raised tailings dams or dams with unresolved engineering findings
- Informal miners, trespassers or hunters entering pits and old workings
- Independent tailings review panel and an engineer of record on retainer
- Emergency action plans with tested sirens and community drills downstream
- Fencing, berms and patrols around pits, shafts and open stopes
Products and completed work
ModerateConcentrates and bullion sell to smelters on assay terms; concentrate shipped too wet can shift and endanger a vessel.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Concentrate loaded for sea transport without moisture limit testing
- Lead or arsenic-bearing concentrate that dusts during rail and port handling
- Moisture testing and certificates for every shipment by sea
- Sealed containers or covered rail cars for lead or arsenic-bearing concentrate
Workers’ injury
HighRock falls, haul truck and light vehicle collisions, conveyor entanglement, silica dust and cyanide exposure cause severe and fatal injuries.
Injuries and illness to employees.
- Deep underground workings with seismic activity, heat or diesel exhaust
- Remote camp rotations with long shifts and fatigue
- Contractor crews outside the mine's own training and supervision
- Ground support standards with seismic monitoring and re-entry rules after blasts
- Collision avoidance systems separating haul trucks from light vehicles
- Hydrogen cyanide gas detectors and antidote kits in leach areas
Commercial auto
ElevatedCrew buses and pickups cover long remote roads, and reagent and concentrate trucks travel public highways.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Own fleet hauling concentrate, cyanide or acid on public roads
- Crew transport by bus at shift change after long rosters
- Journey management with fatigue rules and in-vehicle monitoring
- Contracts and certificates for hazardous goods carriers
Crime and theft
ElevatedGold rooms hold bullion and high-grade concentrate, and copper cathode, cable and fuel are stolen from remote sites.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Gold room access by one person or without camera coverage
- Bullion and cathode shipments on a predictable schedule
- Explosives magazines in remote areas without alarms
- Two-person rule, cameras and searches for gold room and smelting
- Secure transport for bullion with varied timing
- Explosives and cyanide inventories reconciled after every issue
Inland marine and equipment
HighUltra-class haul trucks, electric shovels, drills and underground loaders carry very high values and burn readily from hydraulic leaks.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Mobile equipment without automatic fire suppression
- Autonomous haulage fleets with value tied up in onboard systems
- Machines working beneath unstable pit walls or in open stopes
- Fire suppression with engine bay cleaning and hose inspection routines
- Oil analysis, structural crack testing and condition monitoring on the fleet
- Schedule kept at replacement value, including shipping and assembly
Environmental
SevereTailings, waste rock and heap leach pads release acid, metals and cyanide for decades, and closure obligations stay with the owner.
Pollution on or from the site or the work.
- Heap leach pads or ponds with liner leaks or overtopping history
- Acid drainage from waste dumps reaching streams or groundwater
- Closure cost estimates and bonding well below the disturbed footprint
- Water balance modeling with spare pond capacity for extreme rainfall
- Cyanide destruction before tailings discharge, with downstream monitoring
- Progressive reclamation with bonding reviewed against current costs
Cyber and data
ElevatedPlant control systems, autonomous haulage and remote operations centers link production to networks that ransomware can stop.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Control systems reachable from the corporate network or by vendors remotely
- A satellite link that is the only connection for a remote site
- Control networks separated from business systems, with vendor access brokered
- Offline backups of control system configurations, tested on restore
Professional liability
LowThe mine sells metal, not advice; tailings and slope designs come from outside engineers carrying their own cover.
Loss or injury caused by advice, design, testing, care or another professional service.
- Toll milling or technical services sold to other mine owners
- Written terms and limits for any toll milling or consulting
Umbrella and excess
SevereOne tailings failure can kill people downstream, destroy property and contaminate rivers, producing claims far beyond primary limits.
How likely one liability event is to exhaust primary limits.
- Populated areas within the inundation zone of any dam
- Joint ventures where the insured is not the operator
- Dam breach studies with inundation maps shared with local authorities
- Insurance and indemnity terms aligned across joint venture partners
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Steel-framed mill and crusher buildings with metal cladding, long conveyor galleries, shaft headframes, tank farms and modular camps, spread over large sites with few fire walls.
- Occupancy
- Crushing, grinding and flotation with oils and reagents, solvent extraction with flammable diluent, cyanide leaching, carbon regeneration kilns and furnaces in the gold room.
- Protection
- A dedicated fire water supply with pumps, foam or deluge at solvent extraction, sprinklered conveyor galleries and transfer houses, detection in electrical rooms and a trained emergency response team.
- Exposure
- Remote locations with long response times, grassland or forest around the site, and pit walls, waste dumps and tailings that can fail onto the plant and roads.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: mine and plant
On site: tailings and water
On site: equipment and people
On site: security and records
Refer or decline if you find
- Upstream-raised tailings dam with populated areas in its inundation zone
- Solvent extraction plant with no fixed fire protection
- No spare and no recovery plan for the main mill drive
- Heap leach or pond overtopping with no change to the water balance
- Closure bonding far below the current cost estimate
How UrbanStat data helps.
Extreme rainfall overtops ponds and leach pads, and earthquakes can liquefy tailings behind older dams. Steep terrain brings slides onto roads, conveyors and power lines, while remote sites surrounded by brush or forest wait long for firefighting help.
- Earthquake and flood scores at the mine address help judge tailings dams and leach pads, where strong shaking or extreme rain can trigger a release.
- Underwriting rules drawn as areas on the map can send new mining business inside known dam inundation zones or slide-prone terrain to referral automatically.
- Live wildfire perimeters overlaid on insured locations show which remote mills, camps and fuel stores are in a fire's path while the event unfolds.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
2.2 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.
0.8 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Copper, nickel, lead, and zinc mining (NAICS 21223), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
24 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Mining (except Oil and Gas) (NAICS 212), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
12 citations from 5 inspections; 33% were classed serious, willful or repeat.
- 1910.141 Sanitation2
- 1910.303 General (electrical)2
- 1910.134 Respiratory protection1
- 1904.39 Reporting fatalities, hospitalizations, amputations, and losses of an eye as a result of work-related incidents to OSHA1
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Metal Ore Mining (NAICS 2122), the closest published group. Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
1.63 large trucks in fatal crashes per 100 million miles driven, down from 1.77 in 2022. 35 were in injury crashes per 100 million miles.
5,472 people died in crashes involving large trucks; 70% of them were in other vehicles. 55% of the fatal crashes happened in rural areas and 25% on interstates.
United States, 2023, all large trucks rather than this industry alone. Large trucks are trucks over 10,000 pounds gross vehicle weight rating. Rates are per 100 million miles traveled by large trucks. Source: National Highway Traffic Safety Administration, Traffic Safety Facts: Large Trucks, 2023 Data (DOT HS 813 717).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
36 facilities reported toxic chemical releases totaling 355.1 million pounds on and off site.
- Lead and lead compounds180.7M
- Copper and copper compounds89.3M
- Zinc compounds42.4M
Chemicals released in the largest amounts, in pounds. 26 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Copper, Nickel, Lead, and Zinc Mining (NAICS 212230). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Equipment breakdown
- Mill drives, gearboxes, crushers and large transformers fail mechanically and stop the whole plant for months.
- Pollution legal liability
- Gradual seepage from tailings and leach pads is excluded under most general liability forms and builds over decades.
- Reclamation and surety bonds
- Authorities require financial assurance for closure, and the cost estimate grows as the mine expands.
- Cargo and transit
- Concentrate, cathode and bullion move by road, rail and sea in high-value shipments.
- Contingent business interruption
- A single smelter, port or rail line taking all output can stop sales without any damage at the mine.
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 212230 | Copper, Nickel, Lead, and Zinc Mining |
| NAICS 2022 | 212220 | Gold Ore and Silver Ore Mining |
| NAICS 2022 | 212210 | Iron Ore Mining |
| NAICS 2022 | 212290 | Other Metal Ore Mining |
| NAICS 2022 | 213114 | Support Activities for Metal Mining |
| SIC 1987, primary | 1021 | Copper Ores |
| SIC 1987 | 1041 | Gold Ores |
| SIC 1987 | 1011 | Iron Ores |
| SIC 1987 | 1031 | Lead and Zinc Ores |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.