Industrial mineral mines
Industrial mineral mines extract phosphate, potash, trona, salt, borates, lithium, clays, talc and silica by open pit, underground or solution mining, then dry, calcine or chemically treat them into ingredients for fertilizer, glass, ceramics and food. Kilns, mine flooding and contaminated product drive the largest claims.
Where losses come from.
- 01
Brine or water inflows that flood underground potash and salt workings beyond recovery
- 02
Fires and breakdowns at the kilns, dryers and calciners that all product passes through
- 03
Asbestos, silica or other contaminants in minerals sold into consumer, food and industrial products
- PropertyProperty: Elevated, 3 of 5; sector average 3.4; all business types 2.9.
- Business interruptionBusiness interruption: High, 4 of 5; sector average 3.7; all business types 2.7.
- Premises liabilityPremises liability: Elevated, 3 of 5; sector average 3.6; all business types 2.7.
- Products and completed workProducts and completed work: High, 4 of 5; sector average 2.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 4.1; all business types 3.0.
- Commercial autoCommercial auto: Elevated, 3 of 5; sector average 3.3; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 2.2; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 3.8; all business types 2.6.
- EnvironmentalEnvironmental: High, 4 of 5; sector average 3.9; all business types 2.3.
- Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.5; all business types 2.7.
- Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.3; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 4.5; all business types 3.6.
- Lithium projects using brine ponds, direct extraction and acid leaching are expanding fast, often run by new operators with short loss histories and untested processes.
- Juries have returned large verdicts over asbestos in talc, and testing expectations for cosmetic and pharmaceutical minerals keep tightening, raising products and umbrella exposure for suppliers.
- Tighter limits on respirable crystalline silica bring more air monitoring and engineering controls to drying and bagging, and more disease claims surface as awareness grows.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ElevatedMost ore will not burn; the losses come from kiln and dryer burner explosions, baghouse and conveyor fires, and inflows that drown underground mines.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Underground potash or salt mines with known water-bearing layers above
- Kiln and dryer burners without flame safeguards or purge interlocks
- Dust collectors handling combustible dusts such as sulfur or graphite
- Burner management systems tested and serviced on a set schedule
- Inflow monitoring, grouting and pumping capacity matched to the mine plan
- Explosion venting and spark detection on dust collectors
Business interruption
HighOutput depends on one shaft hoist, kiln or dryer, and replacing a hoist motor or kiln shell can take many months.
How long and how costly a shutdown is.
- A single production shaft with no second means of hoisting ore
- Solution mining well fields or brine ponds with no spare capacity
- Buyers that need a certified grade from one specific deposit
- Critical spares and rebuild plans for hoists, kilns and main motors
- Finished product inventory held in warehouses near major customers
Premises liability
ElevatedSolution mining caverns and old workings can collapse into sinkholes, and dust, blasting and bulk trucks reach neighbors.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Salt caverns or brine wells near homes, roads or pipelines
- Clay or phosphate settling ponds above neighboring land
- Product trucks and rail cars loaded by customers' drivers
- Cavern pressure and surface subsidence monitoring with surveyed benchmarks
- Engineered dams and routine inspections for settling ponds
- Site rules and loading supervision for outside drivers
Products and completed work
HighMinerals become ingredients in food, cosmetics, feed and building products, and contamination with asbestos, silica or metals can become a mass tort.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Talc, vermiculite or clay deposits near asbestos-bearing rock
- Sales into cosmetics, pharmaceuticals, food or animal feed
- Bagged silica or minerals sold without hazard labeling
- Routine lot testing for asbestos fibers and heavy metals by an outside laboratory
- Retained samples and certificates of analysis for every shipment
- Safety data sheets and labels that state crystalline silica content
Workers’ injury
HighUnderground roof falls, mobile equipment, conveyors, kiln burns and silica dust make injuries frequent and some severe.
Injuries and illness to employees.
- Underground workings with squeezing ground or high temperatures
- Respirable silica in drying, bagging and loading areas
- Kiln and dryer maintenance in confined, hot spaces
- Ground control plans with scaling and bolting standards
- Enclosed bagging, dust extraction and respirator fit testing
- Lockout, confined space permits and cool-down rules for kilns
Commercial auto
ElevatedBulk trucks deliver product on public roads, and some miners run their own road salt or fertilizer delivery fleet.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Own bulk truck fleet running long winter salt routes
- Tankers carrying acids or brines to and from site
- Driver qualification files, telematics and fatigue limits
- Contracts and certificates required for outside carriers
Crime and theft
ModerateBulk product has low value per ton; thefts are fuel, copper cable, tools and occasionally refined lithium or specialty grades.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- High-value refined products such as lithium carbonate held in yards
- Explosives stored at remote magazines
- Weighbridge ticketing reconciled to shipments and invoices
- Fenced, lit and camera-covered magazines and product storage
Inland marine and equipment
ElevatedDraglines, loaders, haul trucks and underground continuous miners are costly, and rough conditions cause frequent damage.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Large draglines in phosphate mining with long repair times
- Machines in underground salt or potash mines that corrode quickly
- Fire suppression, wash-down and corrosion control on the mobile fleet
- Schedule at replacement value including underground assembly
Environmental
HighBrine, acid, phosphate clay slimes, radium-bearing gypsum and lithium evaporation ponds can contaminate groundwater and streams for years.
Pollution on or from the site or the work.
- Brine or tailings ponds with liner damage or seepage
- Phosphate clay settling areas or gypsum stacks with seepage or sinkholes
- Solution mining wells with casing failures
- Groundwater monitoring wells around ponds, stacks and well fields
- Well casing integrity tests on a set schedule
- Closure and water treatment costs funded and bonded
Cyber and data
ModerateKiln controls and solution mining well fields use networked systems, but few personal records are held and much runs locally.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Well fields and pumps controlled remotely over public networks
- Process control systems sharing networks with office systems
- Control networks separated from business systems
- Tested offline backups for plant configuration and production data
Professional liability
LowThe mine sells minerals to specification; testing errors fall under products, and design work is done by outside engineers.
Loss or injury caused by advice, design, testing, care or another professional service.
- Toll processing or technical services sold to other producers
- Written contracts limiting liability for services provided
Umbrella and excess
HighContamination claims over talc or silica can span many products and policy years, and a sinkhole or pond failure can damage whole neighborhoods.
How likely one liability event is to exhaust primary limits.
- Long sales history of talc, vermiculite or silica into consumer goods
- Housing or roads above caverns or old workings
- Archive of past sales, testing results and insurance policies
- Contract indemnities and certificates from distributors and customers
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Steel-framed processing plants with kilns, dryers and silos, metal-clad warehouses for bagged product, shaft headframes and hoist houses, and offices in older masonry buildings.
- Occupancy
- Fuel-fired kilns, calciners and dryers, dust collectors, belt conveyors, flotation or acid leaching, and bagging lines that generate fine dust and stacks of plastic packaging.
- Protection
- Burner safety systems on kilns and dryers, sprinklers in warehouses and conveyor galleries, explosion venting on collectors, and inflow monitoring with standby pumps underground.
- Exposure
- Large rural sites beside settling ponds, brine fields and rail spurs, with neighbors' homes and roads sometimes sitting above caverns or old underground workings.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: mine and well field
On site: processing plant
On site: product and environment
On site: vehicles and records
Refer or decline if you find
- Talc or vermiculite sold for consumer use with no asbestos testing
- Underground mine with unexplained or growing water inflow
- Kiln or dryer burners with bypassed flame safeguards
- Brine cavern or well field with casing failures or surface subsidence
- Settling or brine ponds with seepage and no monitoring wells
How UrbanStat data helps.
Heavy rain overtops settling and brine ponds and pours into pits, and coastal phosphate and salt operations face hurricanes. Plains sites with tall silos and conveyors take tornado damage, while wet spells destabilize pit slopes and waste piles.
- Flood and hurricane scores at the address show how exposed settling ponds, brine fields and processing plants are before pricing pollution and interruption terms.
- Parcel and permit data for properties above solution mining caverns give construction dates and building values, helping size sinkhole and subsidence liability.
- Fast scoring through the risk analysis API lets every salt depot and bagged-product warehouse on a long schedule be checked inside the quoting workflow.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
1.8 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.
1.0 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Other nonmetallic mineral mining and quarrying (NAICS 21239), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
11 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Nonmetallic Mineral Mining and Quarrying (NAICS 2123), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
168 citations from 68 inspections; 30% were classed serious, willful or repeat.
- 1910.1200 Hazard communication8
- 1910.28 Duty to have fall protection and falling object protection4
- 1910.134 Respiratory protection4
- 1926.451 General requirements (scaffolds)3
- 1910.1053 Respirable crystalline silica3
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Nonmetallic Mineral Mining and Quarrying (NAICS 2123), the closest published group. Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
1.63 large trucks in fatal crashes per 100 million miles driven, down from 1.77 in 2022. 35 were in injury crashes per 100 million miles.
5,472 people died in crashes involving large trucks; 70% of them were in other vehicles. 55% of the fatal crashes happened in rural areas and 25% on interstates.
United States, 2023, all large trucks rather than this industry alone. Large trucks are trucks over 10,000 pounds gross vehicle weight rating. Rates are per 100 million miles traveled by large trucks. Source: National Highway Traffic Safety Administration, Traffic Safety Facts: Large Trucks, 2023 Data (DOT HS 813 717).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
9 facilities reported toxic chemical releases totaling 86,706 pounds on and off site.
- Lead compounds52,100
- Copper compounds27,846
- Chromium compounds2,629
Chemicals released in the largest amounts, in pounds. 2 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Other Nonmetallic Mineral Mining and Quarrying (NAICS 212390). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Product recall
- A contaminated lot of mineral in food, feed or cosmetics forces customers to pull finished goods from shelves.
- Equipment breakdown
- Hoists, kiln drives, main motors and compressors fail without fire and can stop all output for months.
- Pollution legal liability
- Brine, acid and pond seepage develop gradually and fall outside most general liability policies.
- Reclamation and surety bonds
- Closure, cavern plugging and long-term water treatment require financial assurance that grows with the operation.
- Contingent business interruption
- Many mines sell to one fertilizer, glass or battery plant, so a customer's outage stops sales.
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 212390 | Other Nonmetallic Mineral Mining and Quarrying |
| NAICS 2022 | 212323 | Kaolin, Clay, and Ceramic and Refractory Minerals Mining |
| NAICS 2022 | 212322 | Industrial Sand Mining |
| SIC 1987, primary | 1474 | Potash, Soda, and Borate Minerals |
| SIC 1987 | 1475 | Phosphate Rock |
| SIC 1987 | 1479 | Chemical and Fertilizer Mineral Mining, NEC |
| SIC 1987 | 1459 | Clay, Ceramic, and Refractory Minerals, NEC |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.