Masonry contractorsNAICS 238140 · SIC 1741
Masonry contractors lay brick, concrete block and stone and apply stucco, from load-bearing walls and thin veneers to chimneys and the restoration of old facades. Crews work from scaffolds with heavy units and silica-laden dust, and their finished walls must keep out water and stay standing for decades.
NAICS 238140 Masonry ContractorsSIC 1741 Masonry, Stone Setting, and Other Stone Work+1 more code
Where losses come from.
- 01
Falls from scaffolds and back injuries from lifting block and stone
- 02
Water trapped behind stucco and veneer with missing flashing, weeps or drainage
- 03
Unbraced walls, tools or masonry falling on people and property below
- PropertyProperty: Moderate, 2 of 5; sector average 2.2; all business types 2.9.
- Business interruptionBusiness interruption: Low, 1 of 5; sector average 1.8; all business types 2.7.
- Premises liabilityPremises liability: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
- Products and completed workProducts and completed work: High, 4 of 5; sector average 3.8; all business types 2.6.
- Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.8; all business types 3.0.
- Commercial autoCommercial auto: Elevated, 3 of 5; sector average 3.1; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.7; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 3.2; all business types 2.6.
- EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.5; all business types 2.3.
- Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.0; all business types 2.7.
- Professional liabilityProfessional liability: Low, 1 of 5; sector average 2.3; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 4.0; all business types 3.6.
- Thin adhered stone and manufactured veneer have replaced much full brick on wood-frame homes, bringing more water intrusion and rot claims years after completion.
- Stricter silica dust rules push wet cutting, vacuum shrouds and written exposure plans, raising job costs but cutting long-term lung disease claims.
- Facade inspection programs for older tall buildings drive restoration work at height over sidewalks, where falling masonry can injure the public.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ModerateStock is brick, block, sand and cement, which do not burn; the yard holds scaffolding, mixers and a few vehicles.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Propane heaters and fuel stored in the shop
- Pallets and packaging piled against buildings
- Fuel and gas cylinders in a ventilated outdoor cage
- Yard kept clear of waste pallets
Business interruption
LowWork moves between job sites and already stops for frost and rain; damage to the yard hardly interrupts it.
How long and how costly a shutdown is.
- One large project or one general contractor providing most work
- Spread of customers and written contracts with payment terms
Premises liability
ElevatedWalls under construction blow over in wind, and brick, tools and dust fall or drift onto people, cars and neighbors.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Tall block walls left unbraced overnight
- Scaffolds over sidewalks or adjoining property
- Dry cutting beside parked cars and open windows
- Bracing plan and restricted zone for walls until tied in
- Debris netting, toe boards and covered walkways
- Wet saws or vacuum shrouds on every cut
Products and completed work
HighStucco and veneer that trap water rot the frame behind them, and badly built fireplaces and chimneys start house fires.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Adhered stone veneer and stucco on wood-frame housing
- Fireplaces and chimneys built with reduced clearances
- Structural or retaining walls built without engineered drawings
- Flashing, weep and drainage details photographed before covering
- Fireplace and chimney clearances to framing photographed before they are closed in
- Contracts that define scope and who supplies the water barrier
Workers’ injury
HighHeavy lifting all day, work at height on scaffolds, saws and silica dust produce frequent strains and some very serious injuries.
Injuries and illness to employees.
- Scaffolds erected by the masons themselves without a competent inspector
- Heavyweight block laid by one person
- Laborers paid cash or treated as subcontractors
- Scaffolds inspected daily, fully planked with guardrails
- Mast-climbing platforms and lightweight or two-person units
- Dust controls and respirators with a written silica plan
Commercial auto
ElevatedTrucks and trailers haul heavy pallets, mixers and scaffolding to sites, and crews drive daily.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Overloaded pickups and trailers
- Truck-mounted forklifts or boom trucks delivering to site
- Loads weighed against vehicle ratings and strapped
- Driving record checks for crew drivers
Crime and theft
ModerateTools, saws, scaffolding and materials are taken from unattended job sites and trucks.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Materials delivered days ahead to open sites
- Tools left in trucks overnight
- Deliveries timed to the work
- Lockable job boxes and marked equipment
Inland marine and equipment
ElevatedScaffolding, mast climbers, mixers, saws, telehandlers and materials awaiting installation sit on job sites for weeks.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Rented mast climbers or telehandlers on the insured's responsibility
- Stone or specialty brick with long reorder times stored on site
- Equipment schedule including rented items
- Installation cover for materials until the work is accepted
Environmental
ModerateSilica dust, mortar wash-out and acid cleaning runoff are the pollutants, in small amounts per job.
Pollution on or from the site or the work.
- Acid wash rinsed into storm drains or onto landscaping
- Restoration work disturbing lead paint or old sealants
- Wash-out contained and neutralized on site
- Testing for hazardous coatings before grinding old masonry
Cyber and data
ModerateEstimates, payroll and progress billing run on cloud apps and email; diversion of a large progress payment is the main loss.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Progress payments and supplier bank details changed by email
- One shared login for estimating, payroll and banking
- Multi-factor login on email, banking and payroll
- Callback checks before any change to payment details
Professional liability
LowMasons build to architects' and engineers' details; design claims arise only when the firm designs walls itself.
Loss or injury caused by advice, design, testing, care or another professional service.
- Retaining or tall walls designed by the firm without an engineer
- Engineered drawings required for structural and retaining walls
Umbrella and excess
HighA wall collapse in wind, falling facade masonry or a scaffold failure over a sidewalk can kill passers-by and exceed primary limits.
How likely one liability event is to exhaust primary limits.
- Scaffolds over public sidewalks and facade work on tall buildings
- Tall block walls and retaining walls beside occupied areas
- Engineered scaffold and bracing design on tall or public-facing work
- Covered walkways and debris netting wherever work overhangs the public
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- A yard with a metal or block shed, outdoor stacks of brick, block and stone on pallets, and covered storage for cement, lime and scaffolding.
- Occupancy
- Mostly noncombustible stock, with propane heaters, fuel for mixers and saws, pallets and wrapping, and acids and sealers used for cleaning masonry.
- Protection
- Fuel and cylinders in a ventilated outdoor cage, waste pallets cleared, acids stored apart from other chemicals, and a fenced, lit yard with cameras.
- Exposure
- Yards sit in industrial or edge-of-town areas; on job sites, scaffolds, unbraced walls and dust reach sidewalks, parked cars and neighboring buildings.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: work performed
On site: job sites
On site: equipment and vehicles
On site: records
Refer or decline if you find
- Adhered veneer or stucco on wood framing with no drainage plane
- Scaffolds without guardrails or daily inspection
- Dry cutting with no dust control
- Fireplace or chimney work with no inspection
- Uninsured subcontract crews
How UrbanStat data helps.
Fresh masonry is weakest before it cures and is tied in, so windy sites raise collapse risk. Unreinforced masonry performs poorly in earthquakes, which matters for completed work. Job site theft varies sharply by neighborhood.
- Wind scores at a project address show the exposure of scaffolds and of walls that stand unbraced until they are tied in.
- Earthquake scores for the areas where the contractor works inform completed-work terms for masonry walls, chimneys and veneer.
- Crime scores at the yard and at job addresses inform theft terms for tools, scaffolding and materials left on site.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
1.9 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.
1.2 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Masonry contractors (NAICS 23814), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
26 fatal work injuries in 2024, most often from falls, slips and trips (14).
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Masonry Contractors (NAICS 23814), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
2,791 citations from 786 inspections; 78% were classed serious, willful or repeat.
- 1926.451 General requirements (scaffolds)922
- 1926.1153 Respirable crystalline silica369
- 1910.1200 Hazard communication221
- 1926.501 Duty to have fall protection141
- 1910.134 Respiratory protection97
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Masonry Contractors (NAICS 238140). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Installation floater
- Stone and specialty brick with long reorder times sit on site at the mason's risk until installed.
- Contractors' pollution liability
- Silica dust, acid wash runoff and disturbed lead coatings fall under general liability pollution exclusions.
- Contractual liability
- General contractors push broad indemnity and additional insured terms onto masonry subcontractors.
- Hired and non-owned auto
- Crew members drive their own pickups to job sites and supply yards.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.