Lithium-ion battery manufacturers and recyclersNAICS 335910 · SIC 3691

Lithium-ion battery makers coat electrodes, assemble and charge cells, and build modules and packs; recyclers discharge, shred and refine spent batteries for their metals. Charged cells, flammable electrolyte and solvents share one building, so a single cell in thermal runaway can destroy the plant.

NAICS 335910 Battery ManufacturingSIC 3691 Storage BatteriesNAICS 562920 Materials Recovery FacilitiesNAICS 423930 Recyclable Material Merchant Wholesalers+4 more codes

Manufacturing · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Thermal runaway in formation, aging or scrap storage that spreads cell to cell through the building

  2. 02

    Fires and explosions when shredders or crushers puncture batteries that were not fully discharged

  3. 03

    Cell defects that cause fires in vehicles, devices or energy storage systems after sale

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: Severe, 5 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Elevated, 3 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: Severe, 5 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: High, 4 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Severe, 5 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Lithium iron phosphate cells resist thermal runaway better than nickel-rich chemistries, lowering fire frequency, though the stored energy in each new plant keeps rising.
  • Recycling volumes are climbing as early electric vehicle packs and consumer batteries reach end of life, putting more damaged, unpredictable batteries into shredders and yards.
  • New plants ramp up fast with inexperienced staff and unproven lines, and start-up periods bring more scrap cells, small fires and quality escapes.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Severe
Charged cells can ignite without warning and spread through formation racks, scrap bins or shredder feed, beside flammable electrolyte and solvent.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Formation and aging rooms with dense racks of charging cells and no cutoff
  • Reject cells or incoming spent batteries piled indoors in open bins
  • Shredding lines fed with batteries not discharged or checked for damage
Controls that matter
  • Formation, aging and scrap areas fire-separated, sprinklered and fitted with gas detection
  • Spent and reject batteries held outdoors or in rated containers, apart from buildings
  • Shredding under inert gas or liquid, with discharge checks before feed

Business interruption

High
Dry rooms, coating lines and formation equipment take many months to replace, and vehicle and device makers will not wait for requalification.

How long and how costly a shutdown is.

Watch for
  • A single dry room, coater or formation hall serving all output
  • Supply contracts tied to vehicle launches with penalties for missed volumes
  • Cathode materials, separators or electrolyte from one qualified supplier
Controls that matter
  • Fire walls splitting electrode, assembly, formation and warehouse areas
  • Second qualified source for key materials and critical spares held on site

Premises liability

Elevated
Few visitors enter, but a battery fire sends toxic smoke over neighbors and can force evacuations, road closures and claims for lost trade.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Homes, schools or businesses close downwind of storage and recycling yards
  • Public battery drop-off counters at a recycling site
Controls that matter
  • Emergency plan shared and rehearsed with the local fire service
  • Air monitoring and neighbor notification arrangements ready before any incident

Products and completed work

Severe
Cells go by the thousand into vehicles, homes and devices; one contamination or design flaw can mean fires, injuries and a fleet-wide recall.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Packs built for e-bikes, scooters or tools sold without full abuse testing
  • Cells sold loose to pack builders with no control of application
  • Recovered or second-life cells resold for reuse without grading records
Controls that matter
  • In-line inspection for metal particles, misaligned electrodes and internal shorts
  • Lot traceability from electrode batch to finished pack serial number
  • Battery management design reviews and abuse testing for every pack model

Workers’ injury

Elevated
Solvent and metal powder exposure, high-voltage pack work and burns from cell fires are the main sources, in largely automated plants.

Injuries and illness to employees.

Watch for
  • Manual discharge, sorting or dismantling of damaged batteries at recyclers
  • Open handling of nickel and cobalt powders or electrode solvent
  • Staff told to fight cell fires rather than evacuate
Controls that matter
  • Closed powder and solvent handling with local exhaust and air sampling
  • Insulated tools, arc-rated clothing and lockout for all pack and module work
  • Gas monitoring for fluoride compounds and hydrogen near electrolyte and failed cells

Commercial auto

Moderate
Manufacturers ship through dangerous goods carriers, but many recyclers run their own trucks collecting used and damaged batteries.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Damaged or swollen batteries collected without fire-rated containers
  • Drivers without dangerous goods training
Controls that matter
  • Approved packaging, state-of-charge limits and segregated loads on every collection run
  • Driver files, telematics and dangerous goods training records

Crime and theft

Moderate
Cobalt and nickel materials, copper foil and black mass have scrap value, and finished cells resell easily on gray markets.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Rejected cells leaving site for scrap without destruction records
  • Black mass and metal stock without weighed reconciliation
Controls that matter
  • Certified destruction of rejects and weighed reconciliation of high-value materials
  • Camera coverage and controlled access at stores and loading docks

Inland marine and equipment

Elevated
Cells and packs are regulated dangerous goods in transit; a damaged pallet can burn a trailer, container or customer's warehouse.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Cells shipped at high state of charge or in reused packaging
  • Prototype or failed cells returned through ordinary couriers
Controls that matter
  • Certified packaging and charge limits on every outbound shipment
  • Forwarders and carriers approved for lithium battery cargo

Environmental

High
Electrode solvent, nickel and cobalt dust, fluoride gases from electrolyte, acid leaching at recyclers and toxic firewater all reach air, soil and drains.

Pollution on or from the site or the work.

Watch for
  • Spent battery stockpiles on unpaved or undrained ground
  • No firewater containment sized for a large battery fire
  • Leaching or wastewater treatment discharging near operating permit limits
Controls that matter
  • Solvent recovery and dust collection with monitored emissions
  • Paved, contained storage yards draining to treatment
  • Firewater containment tanks or drain shut-offs tested on schedule

Cyber and data

Elevated
Formation chargers, dry-room controls and production execution systems are networked, and cell designs and process data are prized trade secrets.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Equipment vendors with standing remote access to production lines
  • Plant controls on the same network as office systems
Controls that matter
  • Production networks segmented, with session-based vendor access
  • Offline backups of recipes, quality records and traceability data

Professional liability

Moderate
Custom pack design, application engineering and test reports that customers rely on can bring claims apart from a physical defect.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Engineering or testing services sold to other manufacturers
Controls that matter
  • Written scope and liability limits for design and testing work

Umbrella and excess

Severe
A cell defect behind vehicle or home fires, or a plant fire that empties a neighborhood, can exhaust several layers of limits.

How likely one liability event is to exhaust primary limits.

Watch for
  • Cells supplied for vehicles, aircraft, medical devices or home storage
  • Dense housing close to the plant or recycling yard
Controls that matter
  • Recall plan tested with customers, with traceability to each pack
  • Contract indemnities and limits agreed with vehicle and device customers
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Large steel-framed plants with long-span roofs and insulated panel walls, dry rooms built from foam-cored panels, and older warehouses converted for pack assembly or recycling.
Occupancy
Graphite and cathode powder mixing, solvent-based electrode coating and drying ovens, electrolyte filling, racks of cells charging in formation, and at recyclers spent battery stockpiles feeding shredders and leaching tanks.
Protection
Fire separation between process areas, sprinklers and gas detection in formation and storage, thermal cameras over battery stockpiles and shredder feeds, explosion venting, and firewater containment for the whole site.
Exposure
New plants often sit in industrial parks near towns; outdoor battery yards, solvent tanks and substations add fire load, and smoke from a fire reaches homes and businesses downwind.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: process

On site: fire protection

On site: people and handling

On site: records and history

Refer or decline if you find

  • Charged cells or scrap batteries stored in the main production hall
  • Small cell fires treated as routine and not investigated
  • Spent batteries shredded without confirmed discharge or inert atmosphere
  • Formation area with no fire separation from warehouse or assembly
  • Packs sold for e-bikes or scooters without abuse test records
05 / Location

How UrbanStat data helps.

Floodwater reaching charged cells or battery yards causes shorts and fires days later. Shaking topples racks of charging cells, roof damage lets rain into dry rooms, and grass fires can reach outdoor battery stockpiles.

FloodEarthquakeWindHurricaneWildfire
  • Flood scores at the address show whether formation halls and outdoor battery yards sit where water could short charged cells and start a delayed fire.
  • Street-by-street exposure views show how much insured value sits around a battery plant, including neighboring warehouses on the book, with alerts when a set threshold is passed.
  • Building-permit history flags older warehouses converted to pack assembly or battery recycling, a prompt to check whether fire protection was upgraded for the new use.
Flood · Earthquake · Wind · Hurricane
06 / Public loss data · NAICS 335910

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

2.7 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Battery manufacturing
2.7
All private industry
2.3

1.0 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Battery manufacturing (NAICS 33591), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

5 fatal work injuries in 2024.

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Electrical Equipment, Appliance, and Component Manufacturing (NAICS 335), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

230 citations from 57 inspections; 66% were classed serious, willful or repeat.

  • 1910.147 The control of hazardous energy (lockout/tagout)
    24
  • 1910.28 Duty to have fall protection and falling object protection
    19
  • 1910.1200 Hazard communication
    14
  • 1910.178 Powered industrial trucks
    12
  • 1910.22 General requirements (walking-working surfaces)
    9

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Materials Recovery Facilities (NAICS 562920). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

76 facilities reported toxic chemical releases totaling 8.1 million pounds on and off site.

  • N-methyl-2-pyrrolidone
    1.9M
  • Cobalt and cobalt compounds
    1.1M
  • Nickel and nickel compounds
    985,106

Chemicals released in the largest amounts, in pounds. 38 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Battery Manufacturing (NAICS 335910). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Product recall
Vehicle and device makers pass back the cost of replacing packs across a whole production run.
Equipment breakdown
Dry-room dehumidifiers, coaters and formation chargers fail without fire and stop output, sometimes scrapping cells in process.
Contingent business interruption
A fire at a sole supplier of cathode material, separator or electrolyte halts cell production for months.
Builders risk
Plants expand in phases, commissioning new lines beside running ones, and fires during start-up are common.
Debris removal limits
Clearing burned cells and contaminated wreckage as hazardous waste often costs far more than standard debris sublimits.

NAICS and SIC codes for lithium-ion battery manufacturers and recyclers

SystemCodeIndustry
NAICS 2022, primary335910Battery Manufacturing
NAICS 2022562920Materials Recovery Facilities
NAICS 2022423930Recyclable Material Merchant Wholesalers
NAICS 2022331492Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)
SIC 1987, primary3691Storage Batteries
SIC 19874953Refuse Systems
SIC 19875093Scrap and Waste Materials
SIC 19873341Secondary Smelting and Refining of Nonferrous Metals
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →