Electrical equipment manufacturersNAICS 335311 · SIC 3612
Electrical equipment makers wind transformers, motors and generators, build switchgear, breakers and control panels, and mold outlets, switches and connectors. Oil-filled units, varnish ovens and high-voltage test bays drive the plant risk, while equipment that fails in service starts fires, causes arc flash or electrocutes workers.
NAICS 335311 Power, Distribution, and Specialty Transformer ManufacturingSIC 3612 Power, Distribution, and Specialty TransformersNAICS 335312 Motor and Generator ManufacturingNAICS 335313 Switchgear and Switchboard Apparatus Manufacturing+8 more codes
Where losses come from.
- 01
Fires at transformer oil filling, varnish impregnation and curing ovens, and plastic molding
- 02
Equipment failures in service that start building fires, cause arc flash or electrocute people
- 03
Crush and electrical injuries from heavy lifts and high-voltage testing
- PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Elevated, 3 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
- Grid expansion, data centers and electric vehicle charging have stretched transformer and switchgear lead times, so a plant loss now delays customers far longer.
- Solid-state breakers, power electronics and connected relays move failures from mechanics to software and firmware, adding cyber and design exposure.
- Older insulating gases are giving way to alternatives and ester oils, lowering fire and environmental exposure but bringing materials with little field history.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
HighTransformer oil, insulating paper and pressboard, varnish dip tanks and curing ovens supply fuel, and high-power testing can ignite it.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Large oil volumes in filling areas, test bays and finished units awaiting shipment
- Varnish or resin dip tanks without covers, interlocks or local suppression
- Lithium-ion batteries charged and tested on inverter or backup power lines
- Sprinklers or deluge over oil areas, with curbs and drainage to a safe location
- Self-closing dip tank covers and oven interlocks for solvent vapor
- Test bays separated by fire walls and kept clear of combustibles
Business interruption
HighWinding machines, vacuum drying ovens and test bays are specialized, and electrical steel, copper and bushings come from few suppliers with long lead times.
How long and how costly a shutdown is.
- A single high-voltage test bay or drying oven serving all large units
- Customer contracts with liquidated damages for late delivery
- Agreements to use another plant's test facilities after a loss
- Buffer stocks of electrical steel, copper and critical bushings
Premises liability
ModerateCustomers witness tests at the plant, and field engineers commission equipment in live substations and plants where others can be hurt.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Field service, commissioning or repair work at customers' energized sites
- Visitors near high-voltage test areas during witness testing
- Written switching and lockout procedures agreed with each site owner
- Test areas fenced, interlocked and marked with warning beacons
Products and completed work
HighBreakers that fail to trip, overheating connections and failed transformers start building fires, cause arc flash, shut down plants and electrocute workers.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Equipment for hospitals, data centers, utilities or mines, where failure is catastrophic
- Imported components or counterfeit breakers entering the supply chain
- Ground fault, arc fault or surge devices sold as life-safety protection
- Type testing and independent listing for each design and rating
- Routine production tests recorded by serial number
- Field failure analysis with clear recall triggers
Workers’ injury
ElevatedOverhead crane lifts of cores and tanks, lamination presses, repetitive winding and high-voltage testing cause crush injuries, strains and electrical burns.
Injuries and illness to employees.
- Test bays without interlocked gates or grounding sticks
- Field technicians working alone on energized equipment
- Confined space entry into transformer tanks
- Interlocked test enclosures with discharge and grounding before entry
- Arc-rated clothing and energized work permits for field staff
- Lift plans and inspected rigging for heavy assemblies
Commercial auto
ModerateLarge units travel with specialized heavy haulers; the insured runs field service trucks and sales cars.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Field service staff driving long distances to remote sites
- Driving record checks and journey limits for field service crews
Crime and theft
ElevatedCopper windings, busbar, scrap and silver contact material are worth stealing and easy to sell to scrap buyers.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Copper scrap bins outdoors or near unmonitored doors
- Silver alloy contacts and precious metal stock without counts
- Scrap weighed, logged and reconciled against copper purchases
- Caged storage, cameras and alarms over copper and precious metals
Inland marine and equipment
ElevatedLarge transformers and switchgear lineups travel by heavy road, rail and sea transport and wait at sites until energized.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Delivery terms leaving the maker at risk until commissioning
- Transformers shipped without impact recorders or monitored dry gas
- Impact recorders and inspection on arrival before off-loading
- Transit and installation cover matching the delivery terms
Environmental
ElevatedTransformer oil, varnishes, solvents and insulating gases are used daily, and older plants often carry PCB contamination in soil and floors.
Pollution on or from the site or the work.
- Plants that built or serviced transformers or capacitors before PCB bans
- Sulfur hexafluoride handled in switchgear filling without leak tracking
- Diked oil storage with spill kits and oil-water separators
- Gas recovery carts and logged inventories for insulating gas
Cyber and data
ElevatedPlants run networked machines, and relays, drives and controllers sold with firmware become entry points into customers' grids and factories.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Connected relays, meters or controllers with remote access features
- Design files and test data on unsegmented networks
- Signed firmware and a vulnerability disclosure and patch process
- Segmented plant networks with offline backups of machine programs
Professional liability
ModerateMost makers sell only hardware, but some sell commissioning, protection settings and system studies, which can be wrong without any product defect.
Loss or injury caused by advice, design, testing, care or another professional service.
- Arc flash, coordination or load studies sold as separate services
- Design and supply contracts for complete substations or power systems
- Licensed engineers checking and signing every study and setting sheet
- Contracts limiting liability to the contract value
Umbrella and excess
HighA failed breaker or transformer can kill workers by arc flash, burn a building or shut a hospital or data center.
How likely one liability event is to exhaust primary limits.
- Products installed in utilities, hospitals, mines or high-rise buildings
- Field commissioning that energizes customers' systems
- Utility transformers, fuses and line hardware blamed for starting wildfires
- Commissioning checklists signed by the customer before energizing
- Product incident reviews that feed design changes
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Large steel-frame high-bay halls with overhead cranes for transformers and motors; wiring device and control plants are lighter single-story buildings with molding and assembly areas.
- Occupancy
- Copper winding, insulating paper and pressboard, varnish dipping and baking, oil filling, plastic molding, powder coating, welding and high-voltage or high-power testing.
- Protection
- Sprinklers throughout with deluge or foam over oil areas, fire walls around test bays and ovens, dip tank interlocks, monitored alarms and gated test areas.
- Exposure
- Outdoor oil storage, finished transformers in the yard and stacked wooden crates add fuel next to the building, often in industrial parks near substations and rail lines.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: production
On site: testing
On site: plant and storage
On site: field work and records
Refer or decline if you find
- Open varnish dip tanks with no covers, interlocks or suppression
- High-voltage test areas without interlocked gates or warning systems
- Known PCB history at the site with no investigation
- Products sold without type testing or independent listing
- Field staff working on energized equipment without permits or arc-rated gear
How UrbanStat data helps.
Wide-span halls and yards of finished transformers take tornado, wind and hail damage. Floodwater ruins winding rooms, insulating paper and test equipment, and shaking can topple heavy cores on stands and crack porcelain bushings.
- Flood scores at the address show whether winding rooms, insulating paper stock and test bays sit low enough for shallow water to ruin them.
- Street-by-street exposure views show the combined value of the plant, its yard of finished units and nearby suppliers, with alerts when a set threshold is passed.
- Quick peril checks on the sites where units are delivered and installed run inside the quoting workflow through a risk analysis API that answers in seconds.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
3.0 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.
1.2 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Power, distribution, and specialty transformer manufacturing (NAICS 335311). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
5 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Electrical Equipment, Appliance, and Component Manufacturing (NAICS 335), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
84 citations from 28 inspections; 62% were classed serious, willful or repeat.
- 1910.179 Overhead and gantry cranes10
- 1910.212 General requirements for all machines10
- 1910.147 The control of hazardous energy (lockout/tagout)5
- 1910.28 Duty to have fall protection and falling object protection4
- 1910.178 Powered industrial trucks4
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Power, Distribution, and Specialty Transformer Manufacturing (NAICS 335311). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
25 facilities reported toxic chemical releases totaling 105,753 pounds on and off site.
- Certain glycol ethers45,066
- Xylene31,688
- Methanol10,639
Chemicals released in the largest amounts, in pounds. 13 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Power, Distribution, and Specialty Transformer Manufacturing (NAICS 335311). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Product recall
- Breakers, outlets or controls with a hidden defect must be traced and replaced in buildings long after sale.
- Equipment breakdown
- Test transformers, vacuum ovens and winding machines fail electrically or mechanically, with long repair times.
- Contingent business interruption
- A fire at the electrical steel or bushing supplier delays every large order in the plant.
- Contractors pollution
- Oil spills during field installation and repair happen on customers' land, often near drains and waterways.
NAICS and SIC codes for electrical equipment manufacturers
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 335311 | Power, Distribution, and Specialty Transformer Manufacturing |
| NAICS 2022 | 335312 | Motor and Generator Manufacturing |
| NAICS 2022 | 335313 | Switchgear and Switchboard Apparatus Manufacturing |
| NAICS 2022 | 335314 | Relay and Industrial Control Manufacturing |
| NAICS 2022 | 335931 | Current-Carrying Wiring Device Manufacturing |
| NAICS 2022 | 335932 | Noncurrent-Carrying Wiring Device Manufacturing |
| NAICS 2022 | 335999 | All Other Miscellaneous Electrical Equipment and Component Manufacturing |
| NAICS 2022 | 333992 | Welding and Soldering Equipment Manufacturing |
| SIC 1987, primary | 3612 | Power, Distribution, and Specialty Transformers |
| SIC 1987 | 3621 | Motors and Generators |
| SIC 1987 | 3613 | Switchgear and Switchboard Apparatus |
| SIC 1987 | 3625 | Relays and Industrial Controls |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.