Door and window installation contractorsNAICS 238350 · SIC 1751

Door and window installers fit and replace windows, entry and patio doors, garage and overhead doors and automatic entrances in homes and commercial buildings. Each job cuts into the weather envelope, and the units they leave behind are heavy, glazed or powered, so leaks and moving-door injuries follow.

NAICS 238350 Finish Carpentry ContractorsSIC 1751 Carpentry WorkNAICS 238290 Other Building Equipment Contractors+1 more code

Construction · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Water leaking around badly flashed openings and rotting the wall over time

  2. 02

    Powered, overhead and garage doors striking or trapping people after installation or repair

  3. 03

    Strains, cuts and falls while handling heavy glazed units at height

How it comparesEach line’s rating against the average for its NAICS sector, Construction (49 business types), and for all 747.
  1. PropertyProperty: Moderate, 2 of 5; sector average 2.2; all business types 2.9.
  2. Business interruptionBusiness interruption: Low, 1 of 5; sector average 1.8; all business types 2.7.
  3. Premises liabilityPremises liability: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
  4. Products and completed workProducts and completed work: High, 4 of 5; sector average 3.8; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.8; all business types 3.0.
  6. Commercial autoCommercial auto: Elevated, 3 of 5; sector average 3.1; all business types 2.5.
  7. Crime and theftCrime and theft: Low, 1 of 5; sector average 1.7; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 3.2; all business types 2.6.
  9. EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.5; all business types 2.3.
  10. Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.0; all business types 2.7.
  11. Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 2.3; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Elevated, 3 of 5; sector average 4.0; all business types 3.6.
What’s changing
  • Impact-rated and heavier insulated units in storm-prone areas make anchoring and installation detail decisive, and each storm season brings rushed replacement work by new entrants.
  • Smart garage openers, connected locks and automatic entrances add sensors and software to doors, widening service exposure and linking the work to customer networks.
  • Energy-efficiency incentives and point-of-sale financing drive in-home selling, raising consumer protection complaints and the personal financial data the firm collects.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Moderate
A warehouse of boxed windows, doors and trim with light cutting and finishing; breakage matters more than fire.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Staining or spray finishing of doors done in the shop
  • Glazed units racked where forklifts pass
Controls that matter
  • Finishing limited to a ventilated area with rags in metal bins
  • Protected racking and marked aisles

Business interruption

Low
Units are made to order by manufacturers and shipped per job, so the firm can keep installing after a premises loss.

How long and how costly a shutdown is.

Watch for
  • Custom orders for many jobs held in the warehouse at once
Controls that matter
  • Deliveries scheduled close to installation dates

Premises liability

Elevated
Homes are left open, dusty and unsecured mid-job, and heavy units are lifted over people and finished interiors.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Openings left overnight with temporary boarding only
  • Lead-painted frames cut out in occupied homes
  • Upper-floor units hoisted from outside over walkways
Controls that matter
  • Same-day close-up as the rule, one opening at a time
  • Lead-safe containment and cleanup on older buildings
  • Barricades below any lift

Products and completed work

High
Flashing errors cause hidden rot and mold, while garage door springs and automatic doors injure people when set up wrong.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Automatic pedestrian doors or commercial overhead doors installed and serviced
  • Fire-rated doors and exit hardware altered on site
  • Non-safety glass near doors and tubs, or no opening limiters on upper floors
Controls that matter
  • Installation to the manufacturer's instructions, with flashing photographed before trim
  • Force, reversal and sensor tests recorded for every powered door
  • Factory-trained technicians for automatic and fire-rated assemblies

Workers’ injury

Elevated
Installers carry awkward, heavy glazed units up ladders and stairs and work with wound springs under high tension.

Injuries and illness to employees.

Watch for
  • Large insulated glass units carried by hand to upper floors
  • Torsion spring work by untrained helpers
Controls that matter
  • Suction lifters, hoists or lifts for large units
  • Spring work restricted to trained technicians with proper winding bars

Commercial auto

Elevated
Box trucks and vans with glass racks visit several addresses a day; garage door technicians run service routes.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Glass carried on exterior racks
  • Emergency service calls for stuck doors at night
Controls that matter
  • Racks inspected and loads strapped before each trip
  • Driver record checks and telematics

Crime and theft

Low
Stock is bulky and made to measure; little cash changes hands.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Customer deposits handled by commissioned salespeople
Controls that matter
  • Deposits paid to the company by card or check only

Inland marine and equipment

Elevated
Made-to-order units are fragile in transit and sit in garages and on sites until fitted.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Custom or oversized glazing with long replacement lead times
  • Units delivered to open construction sites
Controls that matter
  • Transit and installation cover at replacement cost
  • Units stored upright, indoors and off the floor

Environmental

Moderate
Replacing old frames disturbs lead paint and sometimes asbestos-containing putty or caulk.

Pollution on or from the site or the work.

Watch for
  • Dry scraping or power sanding of old painted frames
Controls that matter
  • Certified lead-safe practices with dust containment and clearance cleaning

Cyber and data

Moderate
In-home sales collect customer financing applications and deposits; spoofed supplier invoices and ransomware on scheduling systems are the main threats.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Financing applications and identity documents kept on sales reps' tablets or phones
  • Supplier payment details changed on an email request
Controls that matter
  • Financing handled through the lender's portal, with no copies kept locally
  • Call-back checks before any change to supplier payment details

Professional liability

Moderate
Installers measure, specify and recommend units, so a wrong impact, egress or fire rating chosen for the customer becomes their error.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Firm selects product ratings for egress, impact or fire-rated openings
  • Energy savings or noise reduction promised in sales material
Controls that matter
  • Product ratings confirmed against the permit or the designer's schedule
  • Contracts and sales material that guarantee no performance figures

Umbrella and excess

Elevated
An automatic or overhead door that crushes a child, or repeated leaks across a condominium project, can exceed primary limits.

How likely one liability event is to exhaust primary limits.

Watch for
  • Multi-unit residential projects with the same detail repeated in every unit
  • Automatic door service contracts for hospitals, stores and transit stations
Controls that matter
  • Contract review limiting indemnity and warranty terms on multi-unit work
  • Documented safety tests on every powered door installed or serviced
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Usually a leased showroom with a warehouse behind it, or a metal or masonry unit in a light industrial park, with a yard for trailers and glass racks.
Occupancy
Storage of boxed windows, doors, cardboard packaging and wood trim, with light cutting, caulking and occasional staining or finishing of doors on the premises.
Protection
Sprinklers where the warehouse has them, monitored fire and intrusion alarms, finishing confined to a ventilated area, and racking protected from forklift strikes.
Exposure
Industrial park neighbors share walls and roofs, the showroom often faces a busy road, and pallets and packaging stacked outside can carry a yard fire to the building.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: work performed

On site: installation practice

On site: equipment and vehicles

On site: records and history

Refer or decline if you find

  • Automatic or overhead door service with no test records
  • Fire door or exit hardware modified in the field
  • No lead-safe certification despite work on older housing
  • Flashing left to the siding or stucco trade without coordination
  • Spring replacement by untrained staff
05 / Location

How UrbanStat data helps.

In hurricane and high-wind areas the products are impact-rated and their anchoring separates a sealed house from a breached one, raising completed-work stakes. Hail breaks glazing in stock and on site, and storm seasons bring rushed replacement work.

HurricaneWindHail
  • Hurricane and wind scores at the job address show where impact ratings and anchoring details carry the most completed-work exposure.
  • Parcel and permit data give a home's construction date, flagging older housing where lead paint is likely before frames are cut out.
  • Underwriting rules drawn on the map apply wind-zone terms automatically to contractors based in designated coastal areas, at new business and renewal.
Hurricane · Wind · Hail
06 / Public loss data · NAICS 238350

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

1.8 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.

Finish carpentry contractors
1.8
All private industry
2.3

1.0 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Finish carpentry contractors (NAICS 23835), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

19 fatal work injuries in 2024, most often from falls, slips and trips (9).

Construction
9.2
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Finish Carpentry Contractors (NAICS 23835), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

578 citations from 207 inspections; 69% were classed serious, willful or repeat.

  • 1926.501 Duty to have fall protection
    94
  • 1926.451 General requirements (scaffolds)
    41
  • 1926.503 Training requirements (fall protection)
    35
  • 1926.102 Eye and face protection
    27
  • 1926.1053 Ladders
    26

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Finish Carpentry Contractors (NAICS 238350). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Contractors pollution liability
Lead paint dust and mold from leaking openings fall outside most general liability pollution terms.
Installation floater
Custom units sitting on site unfitted or half installed are easily broken or stolen before handover.
Hired and non-owned auto
Salespeople and installers drive their own vehicles to appointments, measurements and supply runs.

NAICS and SIC codes for door and window installation contractors

SystemCodeIndustry
NAICS 2022, primary238350Finish Carpentry Contractors
NAICS 2022238290Other Building Equipment Contractors
SIC 1987, primary1751Carpentry Work
SIC 19871796Installation or Erection of Building Equipment, NEC
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →