Commercial diving contractorsNAICS 237990 · SIC 1629
Commercial diving contractors inspect, repair and build underwater for ports, bridges, dams, water intakes, pipelines, ships and offshore platforms. Each diver depends on an umbilical, a compressor and a topside crew, so one failure can kill, and an underwater weld or inspection that proves wrong later can bring a large claim.
NAICS 237990 Other Heavy and Civil Engineering ConstructionSIC 1629 Heavy Construction, NECNAICS 561990 All Other Support Services+1 more code
Where losses come from.
- 01
Diver deaths and injuries from drowning, decompression illness, entrapment and differential pressure at intakes
- 02
Underwater welds, repairs or inspections that fail or miss defects in critical structures
- 03
Damage to dive spreads, vessels and equipment working from barges and docks
- PropertyProperty: Moderate, 2 of 5; sector average 2.2; all business types 2.9.
- Business interruptionBusiness interruption: Moderate, 2 of 5; sector average 1.8; all business types 2.7.
- Premises liabilityPremises liability: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
- Products and completed workProducts and completed work: High, 4 of 5; sector average 3.8; all business types 2.6.
- Workers’ injuryWorkers’ injury: Severe, 5 of 5; sector average 3.8; all business types 3.0.
- Commercial autoCommercial auto: Moderate, 2 of 5; sector average 3.1; all business types 2.5.
- Crime and theftCrime and theft: Low, 1 of 5; sector average 1.7; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: High, 4 of 5; sector average 3.2; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.5; all business types 2.3.
- Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.0; all business types 2.7.
- Professional liabilityProfessional liability: Elevated, 3 of 5; sector average 2.3; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 4.0; all business types 3.6.
- Remotely operated vehicles and sonar take over more inspection and search work, cutting diver exposure but raising the value of equipment lost or damaged underwater.
- Offshore wind farms, cable landings and aging bridges, dams and port structures bring more repair and inspection work on assets where a failure is very costly.
- Stronger storms bring more salvage and emergency inspection work in poor visibility, often under pressure from owners eager to reopen ports and intakes.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ModerateA yard with compressors, gas cylinders, chambers and workshops; oxygen and welding add a fire hazard.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Oxygen and mixed-gas cylinders stored near oil, grease or welding
- Compressor rooms with poor ventilation or oil-fed fires
- Oxygen-clean storage segregated from fuels and hot work
- Compressor maintenance with air quality testing records
Business interruption
ModerateProjects can use rented spreads and vessels, but the loss of chambers or key supervisors delays jobs.
How long and how costly a shutdown is.
- One decompression chamber serving all deep work
- Arrangements with other contractors for chambers and dive support vessels
Premises liability
ElevatedUnderwater cutting, jetting and lifting can damage the structures, vessels and pipelines being worked on or nearby.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Work around live port traffic, locks or dam spillways
- Burning and cutting near fuel lines or pipelines
- Underwater blasting or explosive cutting near structures, vessels or fish habitat
- Job hazard analysis and lockout of intakes, pumps and propellers
- Notice to port and vessel traffic with exclusion zones
Products and completed work
HighOwners rely on underwater welds, pile repairs and grouting on bridges, dams and offshore assets, where failures are costly and hard to spot.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Underwater welding on load-bearing structures
- Pile jackets, grouting and scour repairs on bridges and piers
- Work on oil and gas or power plant intakes
- Qualified welding procedures and certified underwater welders
- Video records of completed repairs reviewed by the owner's engineer
Workers’ injury
SevereA fouled umbilical, an unlocked intake or a rapid ascent can drown or cripple a diver before the standby reaches them.
Injuries and illness to employees.
- Scuba used for commercial work instead of surface-supplied air
- Work near intakes, outfalls or dam gates with differential pressure
- Crews without a standby diver and chamber on site
- Surface-supplied diving with a dressed standby diver for every dive
- Written dive plans, lockout procedures and depth and time limits
- Chamber on site or within the planned travel time
Commercial auto
ModerateTrucks and trailers haul dive spreads to inland jobs; road mileage is moderate.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Oversized trailers carrying compressors and chambers
- Driver qualification and load securing checks
Crime and theft
LowLittle cash; equipment theft is the main concern and is covered under equipment.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Copper and equipment theft from unattended yards
- Fenced, lit yard with cameras
Inland marine and equipment
HighDive spreads, chambers, remotely operated vehicles and support vessels are costly and work in harsh conditions.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Owned or chartered vessels and barges
- Remotely operated vehicles and sonar tethered from boats
- Equipment schedule with values and hull cover for owned vessels
- Pre-dive equipment checks recorded on every job
Environmental
ElevatedFuel and hydraulic spills from vessels and tools, and diving in contaminated water, create pollution claims.
Pollution on or from the site or the work.
- Dives in sewage, outfalls or contaminated harbor sediment
- Hydraulic tools used without biodegradable fluid
- Spill kits on vessels and decontamination for contaminated dives
- Biodegradable hydraulic fluids where possible
Cyber and data
ModerateDive logs, inspection video and owners' drawings sit on laptops and cloud storage; email fraud on progress payments is the usual loss.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Drawings and video of dams and intakes on unmanaged field laptops
- Payment instructions for charters and suppliers changed by email
- Multi-factor login on email, banking and file storage
- Callback checks before any change to payment details
Professional liability
ElevatedOwners make safety and repair decisions on the diver's inspection and survey reports for bridges, dams, hulls and pipelines.
Loss or injury caused by advice, design, testing, care or another professional service.
- Bridge scour and dam safety inspections signed for public owners
- In-water hull surveys relied on by buyers, lenders or vessel owners
- Engineer review of findings before any report is issued
- Video and measurements archived with each report
- Contract wording that caps liability for inspection findings
Umbrella and excess
HighA failed dam or bridge repair, a damaged pipeline or a diver death claimed under maritime law can exceed primary limits.
How likely one liability event is to exhaust primary limits.
- Repairs on dams, bridges, pipelines and power plant intakes
- Divers working from vessels, where maritime injury claims fall outside workers' comp
- Excess limits matched to owner contracts and maritime employer exposure
- Caps on liability and waivers of consequential loss in owner contracts
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- A waterfront or industrial yard with a metal shop and warehouse, often with a dock or bulkhead, and containers fitted out as dive control rooms.
- Occupancy
- Compressors, oxygen and mixed-gas cylinders, welding and cutting gear, hydraulic tools and fuel are stored and serviced together, and chambers are tested on site.
- Protection
- Oxygen kept oil-free and segregated, compressors in ventilated rooms with heat detection, extinguishers at every work area, and a fenced, lit yard with cameras.
- Exposure
- Waterfront yards share docks with marinas, fuel docks and shipyards and face surge; job sites add owners' dams, intakes, pipelines and passing vessels.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: work performed
On site: dive operations
On site: crews and equipment
On site: records
Refer or decline if you find
- Scuba used for commercial work instead of surface-supplied air
- No standby diver or chamber available on deep work
- Differential pressure work without written lockout procedures
- Dive supervisor also diving, leaving no one in charge topside
How UrbanStat data helps.
Coastal yards and vessels face surge and hurricane damage, and storms bring rushed salvage and inspection work in poor water. River and dam work becomes dangerous in high flow after heavy rain.
- Storm surge and hurricane scores at the yard address show whether chambers, compressors and docked vessels sit in water's path.
- Live hurricane track and surge overlays show which insured dive yards and vessels sit in the path while there is time to move them.
- Street-by-street exposure views show insured equipment and vessel values gathered at one port, with alerts when the total passes a set limit.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
1.2 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.
0.4 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Other heavy and civil engineering construction (NAICS 2379), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
158 fatal work injuries in 2024, most often from transportation incidents (69).
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Heavy and Civil Engineering Construction (NAICS 237), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
308 citations from 127 inspections; 41% were classed serious, willful or repeat.
- 1926.651 Specific excavation requirements19
- 1926.652 Requirements for protective systems17
- 1926.1153 Respirable crystalline silica15
- 1926.501 Duty to have fall protection8
- 1926.106 Working over or near water7
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Other Heavy and Civil Engineering Construction (NAICS 237990). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
21 facilities reported toxic chemical releases totaling 3,362 pounds on and off site.
- Ethylene oxide3,090
- Ethylene glycol256
- Propylene oxide16
Chemicals released in the largest amounts, in pounds. 21 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: industry group 5619 (NAICS 5619), the closest published group. Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Maritime employers liability
- Divers working from vessels can bring maritime injury claims that ordinary workers' comp does not answer.
- Maritime workers' comp endorsement
- Dock, pier and harbor work usually falls under a separate maritime compensation scheme that a standard workers' comp policy excludes.
- Hull and protection and indemnity
- Owned dive boats and barges need hull and crew liability cover that general liability excludes.
- Charterer's legal liability
- Chartered vessels and barges damaged while in the contractor's control fall back on the charter terms.
- Contractors' pollution liability
- Fuel and hydraulic spills in harbors and disturbed contaminated sediment fall under pollution exclusions.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.