Brick and structural clay product manufacturers

Brick and tile plants grind clay and shale, extrude or press it, dry the green ware and fire it in gas-fired tunnel kilns; block plants cure concrete instead. The product is inert, but the kiln is a single point of failure, the work is heavy and dusty, and many plants dig their own clay.

Manufacturing · NAICS 327120 · SIC 3251 · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Kiln and dryer explosions, kiln car wrecks and conveyor fires that stop the only production line

  2. 02

    Silica dust, conveyor entanglement and mobile equipment injuries in the pit and plant

  3. 03

    Truck and truck-mounted forklift accidents while delivering packs to building sites

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: Moderate, 2 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Elevated, 3 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Kilns are moving from natural gas toward electric or hydrogen firing to cut emissions, bringing new burners, controls and failure modes into old plants.
  • Robotic setting and unloading replace manual stacking, cutting strain injuries but tying output to controls, spare parts and specialist technicians.
  • Thin brick veneer, concrete pavers and lightweight cladding compete with solid brick, pushing plants toward specialty colors where matching and warranties matter more.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Elevated
Gas-fired kilns and dryers, long rubber conveyors and dust collectors carry the fire and explosion risk; the bricks themselves do not burn.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Combustible body additives, or hot pitch and carbon dust at graphite shape plants
  • Kilns relit after a flame-out without a full purge
  • Spare belting, pallets and plastic wrap stored beside the kiln exit
Controls that matter
  • Flame supervision and purge interlocks on every burner zone
  • Belt alignment and slip switches on main conveyors
  • Hot work permits for maintenance on conveyors and dust ducting

Business interruption

High
One tunnel kiln usually carries the whole plant; a collapse or explosion inside it means months of refractory work.

How long and how costly a shutdown is.

Watch for
  • Single kiln with no sister plant making the same colors and sizes
  • Color-matched orders that cannot be filled from another clay source
Controls that matter
  • Finished stock in the yard covering several weeks of sales
  • Spare kiln cars, fans and drive parts held on site
  • Agreements with sister plants or peers for matching product

Premises liability

Moderate
Clay pits, stockpiles and settling ponds attract trespassers, and haul trucks share roads with the public.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Unfenced pits or ponds near housing
  • Blasting of shale close to neighboring buildings
Controls that matter
  • Perimeter fencing, signs and regular patrols of worked-out areas
  • Wheel washing and road sweeping at the site exit

Products and completed work

Moderate
Faulty bricks spall, crack or stain rather than injure, but replacing a finished wall costs far more than the bricks.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Paving and engineering bricks sold for load-bearing or frost-exposed uses
  • Refractory shapes supplied for furnaces and fireplaces
  • Glazed floor and wall tile sold with slip-resistance claims
Controls that matter
  • Routine strength, absorption and freeze-thaw testing by production lot
  • Sales terms that limit liability to replacement of product

Workers’ injury

High
Crushing and grinding release silica dust, while extruders, setting machines, kiln cars and loaders cause crush and entanglement injuries.

Injuries and illness to employees.

Watch for
  • Hand stacking or sorting of fired bricks at speed
  • Entry into kilns, dryers or clay bins to clear blockages
  • Pedestrians and loaders sharing the yard
Controls that matter
  • Enclosed, ventilated crushing and screening with air monitoring
  • Lockout and confined space procedures for kilns, bins and pug mills
  • Robotic setting and unloading in place of manual stacking

Commercial auto

Elevated
Own flatbed trucks, often with a mounted crane or forklift, deliver heavy packs onto soft, crowded building sites.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Off-loading on public streets or beside overhead power lines
  • Haul trucks crossing public roads between pit and plant
Controls that matter
  • Driver training on load securing and crane or forklift off-loading
  • Telematics and scheduled inspection of delivery trucks

Crime and theft

Low
Bricks are heavy and low in value; theft is limited to fuel, tools and copper from idle plant.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Remote pit sites left unattended with fuel and equipment
Controls that matter
  • Locked fuel tanks, immobilizers and cameras at the pit and yard

Inland marine and equipment

Elevated
Excavators, loaders and haul trucks work the pit, and finished packs travel on the maker's own vehicles.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • High-value mobile plant on a remote or leased pit
  • Equipment working near pit edges and ponds
Controls that matter
  • Scheduled equipment list with current values
  • Fire suppression on loaders and excavators

Environmental

Elevated
Kiln exhaust can carry fluorides and sulfur compounds, pits generate silty runoff, and fuel is stored for mobile plant.

Pollution on or from the site or the work.

Watch for
  • No scrubber on kilns firing fluoride-bearing clay or baking pitch-bonded carbon
  • Pit water pumped straight to a watercourse
  • Old pits backfilled with unknown waste
Controls that matter
  • Stack scrubbing and emissions testing to the site's permit
  • Settling ponds and diked fuel tanks
  • A funded restoration plan for worked-out pits

Cyber and data

Moderate
Tunnel kilns and setting robots run on programmable controls, but most plants can hold the kiln and set ware by hand.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Remote supplier access to kiln and burner control systems
Controls that matter
  • Control networks kept apart from office systems, with offline copies of settings

Professional liability

Low
Bricks are sold to published specifications; technical advice on walls and linings is informal and rarely charged for.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Refractory lining design or installation advice for furnaces and kilns
Controls that matter
  • Product data sheets and written limits on design advice

Umbrella and excess

Elevated
A loaded brick truck crash or a crane off-load accident on a busy site can cause deaths beyond primary limits.

How likely one liability event is to exhaust primary limits.

Watch for
  • Truck-mounted crane or forklift deliveries on dense city streets
  • Blasting in pits close to homes
Controls that matter
  • Delivery site assessments and trained, monitored drivers
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Large single-story steel-frame kiln and dryer halls with noncombustible walls, long conveyor galleries, clay storage sheds, offices and wide open yards of packaged product.
Occupancy
Gas-fired dryers and tunnel kilns, crushing and grinding of clay and shale, combustible body additives, and at some plants pitch-bonded carbon or graphite shapes baked in furnaces.
Protection
Burner management with flame supervision and purge interlocks, conveyor slip and fire detection, sprinklers in packaging and maintenance areas, and explosion protection on dust collectors.
Exposure
Plants sit beside their own pits, ponds and stockpiles, often near rivers; neighbors are few, but blasting, dust and truck traffic reach nearby homes.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: raw materials and process

On site: kilns and plant

On site: people and equipment

On site: environment and records

Refer or decline if you find

  • Single kiln with burner safeguards overdue for testing
  • Combustible additives handled with no dust explosion protection
  • Unfenced water-filled pits near homes or schools
  • No silica air monitoring or health surveillance
05 / Location

How UrbanStat data helps.

Pits and plants often sit on low clay ground near rivers, so flooding reaches kilns and unfired stock. Shaking topples kiln car loads and cracks refractory. Pit faces and stockpiles can slip after heavy rain.

FloodEarthquakeLandslideWind
  • Flood scores at the address show whether a low-lying kiln, dryers and unfired stock are exposed, on sites chosen for their clay rather than their drainage.
  • Landslide and earthquake scores for the site help judge the stability of pit faces and the vulnerability of loaded kiln cars and refractory linings.
  • Parcel and permit data give the plant's construction date and recent kiln or gas permits, a pointer to how old the firing equipment and its controls are.
Flood · Earthquake · Landslide · Wind
06 / Public loss data

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

4.2 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Clay building material and refractories manufacturing
4.2
All private industry
2.3

1.4 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Clay building material and refractories manufacturing (NAICS 32712), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

28 fatal work injuries in 2024, most often from transportation incidents (11).

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Nonmetallic Mineral Product Manufacturing (NAICS 327), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

66 citations from 18 inspections; 30% were classed serious, willful or repeat.

  • 1910.1053 Respirable crystalline silica
    8
  • 1910.134 Respiratory protection
    5
  • 1910.305 Wiring methods, components, and equipment for general use
    4
  • 1910.1200 Hazard communication
    4
  • 1910.147 The control of hazardous energy (lockout/tagout)
    4

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Clay Building Material and Refractories Manufacturing (NAICS 327120). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

114 facilities reported toxic chemical releases totaling 1.7 million pounds on and off site.

  • Hydrogen fluoride
    631,615
  • Chromium and chromium compounds
    500,591
  • Hydrochloric acid
    188,037

Chemicals released in the largest amounts, in pounds. 42 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Clay Building Material and Refractories Manufacturing (NAICS 327120). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Equipment breakdown
Kiln fans, car pushers, extruders and setting robots fail without fire and stop the only line.
Utility service interruption
Losing gas or power to a tunnel kiln mid-firing ruins the load and can damage refractory.
Pollution legal liability
Pit water, kiln emissions and old backfilled ground produce gradual pollution claims that general liability excludes.
Reclamation bonds
Pit permits commonly require a bond guaranteeing restoration of worked-out ground.
Classification
SystemCodeIndustry
NAICS 2022, primary327120Clay Building Material and Refractories Manufacturing
NAICS 2022327331Concrete Block and Brick Manufacturing
NAICS 2022335991Carbon and Graphite Product Manufacturing
SIC 1987, primary3251Brick and Structural Clay Tile
SIC 19873255Clay Refractories
SIC 19873253Ceramic Wall and Floor Tile
SIC 19873271Concrete Block and Brick
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →