---
title: "Brick and structural clay product manufacturers: Industry Risk Guide"
description: "Brick and tile plants grind clay and shale, extrude or press it, dry the green ware and fire it in gas-fired tunnel kilns; block plants cure concrete…"
url: https://www.urbanstat.com/industry-risk-guides/brick-and-structural-clay-product-manufacturers/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Brick and structural clay product manufacturers

Brick and tile plants grind clay and shale, extrude or press it, dry the green ware and fire it in gas-fired tunnel kilns; block plants cure concrete instead. The product is inert, but the kiln is a single point of failure, the work is heavy and dusty, and many plants dig their own clay.

Manufacturing · NAICS 327120 · SIC 3251 · Updated November 2026

Risk profile

1. [Property Elevated](#line-property)
2. [Business interruption High](#line-bi)
3. [Premises liability Moderate](#line-gl)
4. [Products and completed work Moderate](#line-products)
5. [Workers’ injury High](#line-wc)
6. [Commercial auto Elevated](#line-auto)
7. [Crime and theft Low](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental Elevated](#line-env)
10. [Cyber and data Moderate](#line-cyber)
11. [Professional liability Low](#line-prof)
12. [Umbrella and excess Elevated](#line-umbrella)

**Business interruption.** One tunnel kiln usually carries the whole plant; a collapse or explosion inside it means months of refractory work.

Loss drivers

## Where losses come from.

1. Kiln and dryer explosions, kiln car wrecks and conveyor fires that stop the only production line
2. Silica dust, conveyor entanglement and mobile equipment injuries in the pit and plant
3. Truck and truck-mounted forklift accidents while delivering packs to building sites

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Brick and structural clay product manufacturers
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: Moderate, 2 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Elevated, 3 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Kilns are moving from natural gas toward electric or hydrogen firing to cut emissions, bringing new burners, controls and failure modes into old plants.
- Robotic setting and unloading replace manual stacking, cutting strain injuries but tying output to controls, spare parts and specialist technicians.
- Thin brick veneer, concrete pavers and lightweight cladding compete with solid brick, pushing plants toward specialty colors where matching and warranties matter more.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: Elevated (3 of 5)

Gas-fired kilns and dryers, long rubber conveyors and dust collectors carry the fire and explosion risk; the bricks themselves do not burn.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Combustible body additives, or hot pitch and carbon dust at graphite shape plants
- Kilns relit after a flame-out without a full purge
- Spare belting, pallets and plastic wrap stored beside the kiln exit

**Controls that matter**

- Flame supervision and purge interlocks on every burner zone
- Belt alignment and slip switches on main conveyors
- Hot work permits for maintenance on conveyors and dust ducting

### Business interruption: High (4 of 5)

One tunnel kiln usually carries the whole plant; a collapse or explosion inside it means months of refractory work.

Covers: How long and how costly a shutdown is.

**Watch for**

- Single kiln with no sister plant making the same colors and sizes
- Color-matched orders that cannot be filled from another clay source

**Controls that matter**

- Finished stock in the yard covering several weeks of sales
- Spare kiln cars, fans and drive parts held on site
- Agreements with sister plants or peers for matching product

### Premises liability: Moderate (2 of 5)

Clay pits, stockpiles and settling ponds attract trespassers, and haul trucks share roads with the public.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Unfenced pits or ponds near housing
- Blasting of shale close to neighboring buildings

**Controls that matter**

- Perimeter fencing, signs and regular patrols of worked-out areas
- Wheel washing and road sweeping at the site exit

### Products and completed work: Moderate (2 of 5)

Faulty bricks spall, crack or stain rather than injure, but replacing a finished wall costs far more than the bricks.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Paving and engineering bricks sold for load-bearing or frost-exposed uses
- Refractory shapes supplied for furnaces and fireplaces
- Glazed floor and wall tile sold with slip-resistance claims

**Controls that matter**

- Routine strength, absorption and freeze-thaw testing by production lot
- Sales terms that limit liability to replacement of product

### Workers’ injury: High (4 of 5)

Crushing and grinding release silica dust, while extruders, setting machines, kiln cars and loaders cause crush and entanglement injuries.

Covers: Injuries and illness to employees.

**Watch for**

- Hand stacking or sorting of fired bricks at speed
- Entry into kilns, dryers or clay bins to clear blockages
- Pedestrians and loaders sharing the yard

**Controls that matter**

- Enclosed, ventilated crushing and screening with air monitoring
- Lockout and confined space procedures for kilns, bins and pug mills
- Robotic setting and unloading in place of manual stacking

### Commercial auto: Elevated (3 of 5)

Own flatbed trucks, often with a mounted crane or forklift, deliver heavy packs onto soft, crowded building sites.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Off-loading on public streets or beside overhead power lines
- Haul trucks crossing public roads between pit and plant

**Controls that matter**

- Driver training on load securing and crane or forklift off-loading
- Telematics and scheduled inspection of delivery trucks

### Crime and theft: Low (1 of 5)

Bricks are heavy and low in value; theft is limited to fuel, tools and copper from idle plant.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Remote pit sites left unattended with fuel and equipment

**Controls that matter**

- Locked fuel tanks, immobilizers and cameras at the pit and yard

### Inland marine and equipment: Elevated (3 of 5)

Excavators, loaders and haul trucks work the pit, and finished packs travel on the maker's own vehicles.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- High-value mobile plant on a remote or leased pit
- Equipment working near pit edges and ponds

**Controls that matter**

- Scheduled equipment list with current values
- Fire suppression on loaders and excavators

### Environmental: Elevated (3 of 5)

Kiln exhaust can carry fluorides and sulfur compounds, pits generate silty runoff, and fuel is stored for mobile plant.

Covers: Pollution on or from the site or the work.

**Watch for**

- No scrubber on kilns firing fluoride-bearing clay or baking pitch-bonded carbon
- Pit water pumped straight to a watercourse
- Old pits backfilled with unknown waste

**Controls that matter**

- Stack scrubbing and emissions testing to the site's permit
- Settling ponds and diked fuel tanks
- A funded restoration plan for worked-out pits

### Cyber and data: Moderate (2 of 5)

Tunnel kilns and setting robots run on programmable controls, but most plants can hold the kiln and set ware by hand.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Remote supplier access to kiln and burner control systems

**Controls that matter**

- Control networks kept apart from office systems, with offline copies of settings

### Professional liability: Low (1 of 5)

Bricks are sold to published specifications; technical advice on walls and linings is informal and rarely charged for.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Refractory lining design or installation advice for furnaces and kilns

**Controls that matter**

- Product data sheets and written limits on design advice

### Umbrella and excess: Elevated (3 of 5)

A loaded brick truck crash or a crane off-load accident on a busy site can cause deaths beyond primary limits.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Truck-mounted crane or forklift deliveries on dense city streets
- Blasting in pits close to homes

**Controls that matter**

- Delivery site assessments and trained, monitored drivers

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Large single-story steel-frame kiln and dryer halls with noncombustible walls, long conveyor galleries, clay storage sheds, offices and wide open yards of packaged product.
- **Occupancy**: Gas-fired dryers and tunnel kilns, crushing and grinding of clay and shale, combustible body additives, and at some plants pitch-bonded carbon or graphite shapes baked in furnaces.
- **Protection**: Burner management with flame supervision and purge interlocks, conveyor slip and fire detection, sprinklers in packaging and maintenance areas, and explosion protection on dust collectors.
- **Exposure**: Plants sit beside their own pits, ponds and stockpiles, often near rivers; neighbors are few, but blasting, dust and truck traffic reach nearby homes.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What is annual output, and how is it split between face brick, pavers, tile, block and refractories?
- Can a sister plant or a peer make the same colors and sizes if this kiln stops?
- How many deliveries go on the insured's own trucks, and how many trucks carry cranes or forklifts?
- Are any products sold with long warranties or for load-bearing, frost-exposed or fire-rated uses?
- What kiln, conveyor, injury or delivery claims have occurred, and what changed afterward?

### Documents to request

- Loss runs for all lines including auto
- Burner management and kiln safeguard test reports
- Silica air monitoring and health surveillance summaries
- Driver list with records and a delivery vehicle schedule
- Mining, air and water discharge permits

### On site: raw materials and process

- Does the insured run its own clay pit, and is there any blasting?
- How are clay and shale stockpiled, weathered and blended before grinding?
- Are combustible additives such as sawdust or coal fines mixed into the clay?

### On site: kilns and plant

- How many kilns and dryers are there, and how old are the burner management controls?
- What is the procedure for relighting after a flame failure?
- How are conveyors protected against belt slip, misalignment and fire?
- How much finished stock is normally held in the yard?

### On site: people and equipment

- How is silica dust measured and controlled at crushing, grinding and unloading?
- Is setting and unloading of kiln cars manual or robotic?
- What mobile equipment is owned, and how is it maintained and protected?
- How are truck-mounted cranes and forklifts inspected, and how are their operators trained?

### On site: environment and records

- What emission controls are on the kiln stack, and are permits current?
- What is the plan and funding for restoring worked-out pits?

### Refer or decline if you find

- Single kiln with burner safeguards overdue for testing
- Combustible additives handled with no dust explosion protection
- Unfenced water-filled pits near homes or schools
- No silica air monitoring or health surveillance

Location

## How UrbanStat data helps.

Pits and plants often sit on low clay ground near rivers, so flooding reaches kilns and unfired stock. Shaking topples kiln car loads and cracks refractory. Pit faces and stockpiles can slip after heavy rain.

Flood · Earthquake · Landslide · Wind

- Flood scores at the address show whether a low-lying kiln, dryers and unfired stock are exposed, on sites chosen for their clay rather than their drainage.
- Landslide and earthquake scores for the site help judge the stability of pit faces and the vulnerability of loaded kiln cars and refractory linings.
- Parcel and permit data give the plant's construction date and recent kiln or gas permits, a pointer to how old the firing equipment and its controls are.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Earthquake · Landslide · Wind

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**4.2** recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Clay building material and refractories manufacturing

**4.2**

All private industry

**2.3**

1.4 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Clay building material and refractories manufacturing (NAICS 32712), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**28** fatal work injuries in 2024, most often from transportation incidents (11).

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Nonmetallic Mineral Product Manufacturing (NAICS 327), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**66** citations from 18 inspections; 30% were classed serious, willful or repeat.

- 1910.1053 Respirable crystalline silica **8**
- 1910.134 Respiratory protection **5**
- 1910.305 Wiring methods, components, and equipment for general use **4**
- 1910.1200 Hazard communication **4**
- 1910.147 The control of hazardous energy (lockout/tagout) **4**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Clay Building Material and Refractories Manufacturing (NAICS 327120). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**114** facilities reported toxic chemical releases totaling **1.7 million pounds** on and off site.

- Hydrogen fluoride **631,615**
- Chromium and chromium compounds **500,591**
- Hydrochloric acid **188,037**

Chemicals released in the largest amounts, in pounds. 42 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Clay Building Material and Refractories Manufacturing (NAICS 327120). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Equipment breakdown**: Kiln fans, car pushers, extruders and setting robots fail without fire and stop the only line.
- **Utility service interruption**: Losing gas or power to a tunnel kiln mid-firing ruins the load and can damage refractory.
- **Pollution legal liability**: Pit water, kiln emissions and old backfilled ground produce gradual pollution claims that general liability excludes.
- **Reclamation bonds**: Pit permits commonly require a bond guaranteeing restoration of worked-out ground.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [327120](https://www.urbanstat.com/industry-risk-guides/naics/?q=327120) | Clay Building Material and Refractories Manufacturing |
| NAICS 2022 | [327331](https://www.urbanstat.com/industry-risk-guides/naics/?q=327331) | Concrete Block and Brick Manufacturing |
| NAICS 2022 | [335991](https://www.urbanstat.com/industry-risk-guides/naics/?q=335991) | Carbon and Graphite Product Manufacturing |
| SIC 1987, primary | [3251](https://www.urbanstat.com/industry-risk-guides/sic/?q=3251) | Brick and Structural Clay Tile |
| SIC 1987 | [3255](https://www.urbanstat.com/industry-risk-guides/sic/?q=3255) | Clay Refractories |
| SIC 1987 | [3253](https://www.urbanstat.com/industry-risk-guides/sic/?q=3253) | Ceramic Wall and Floor Tile |
| SIC 1987 | [3271](https://www.urbanstat.com/industry-risk-guides/sic/?q=3271) | Concrete Block and Brick |

**Related business types**

- [Pottery and ceramic ware manufacturers](https://www.urbanstat.com/industry-risk-guides/pottery-and-ceramic-ware-manufacturers/)
- [Cement, lime and gypsum manufacturers](https://www.urbanstat.com/industry-risk-guides/cement-lime-and-gypsum-manufacturers/)
- [Precast concrete product manufacturers](https://www.urbanstat.com/industry-risk-guides/precast-concrete-product-manufacturers/)
- [Masonry contractors](https://www.urbanstat.com/industry-risk-guides/masonry-contractors/)
- [Building material dealers and lumberyards](https://www.urbanstat.com/industry-risk-guides/building-material-dealers-and-lumberyards/)
- [Compare Brick and structural clay product manufacturers with Pottery and ceramic ware manufacturers](https://www.urbanstat.com/industry-risk-guides/compare/?a=brick-and-structural-clay-product-manufacturers&b=pottery-and-ceramic-ware-manufacturers)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/brick-and-structural-clay-product-manufacturers/

- Page: Brick and structural clay product manufacturers: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/brick-and-structural-clay-product-manufacturers/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
