Architects and engineers
Architects, engineers, landscape architects, drafters and industrial designers plan buildings, sites, infrastructure and products, then observe construction or production. The office is a light risk. Claims come from design errors that surface years later, injury suits naming the designer alongside the builder, and staff hurt or driving on site visits.
Where losses come from.
- 01
Design errors, code misses and coordination failures found during or long after construction
- 02
Injury suits naming the designer for site safety, a completed structure or a designed product
- 03
Staff falling or being struck during visits to active construction sites
- PropertyProperty: Low, 1 of 5; sector average 1.6; all business types 2.9.
- Business interruptionBusiness interruption: Low, 1 of 5; sector average 2.0; all business types 2.7.
- Premises liabilityPremises liability: Moderate, 2 of 5; sector average 2.2; all business types 2.7.
- Products and completed workProducts and completed work: Moderate, 2 of 5; sector average 1.7; all business types 2.6.
- Workers’ injuryWorkers’ injury: Moderate, 2 of 5; sector average 2.0; all business types 3.0.
- Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.1; all business types 2.5.
- Crime and theftCrime and theft: Low, 1 of 5; sector average 2.1; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.4; all business types 2.6.
- EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 1.5; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 3.1; all business types 2.7.
- Professional liabilityProfessional liability: High, 4 of 5; sector average 3.4; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 2.8; all business types 3.6.
- Shared building models spread design responsibility across many parties, so one coordination error can surface in several firms' work at once.
- Mass timber, modular construction and new facade systems are spreading faster than design experience, raising fire, moisture and structural claims against designers.
- Heavier rain, heat and wind push designs past older assumptions, and owners sue when drainage, cooling or building envelopes fail.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
LowStudios hold workstations, plotters and samples; model shops with cutters and adhesives are small.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Model-making with laser cutters, spray adhesives and foam board
- Archived paper drawings as the only record of old projects
- Laser cutter attended and vented, with an extinguisher beside it
- Archive drawings scanned and stored off site
Business interruption
LowDesign work is digital and resumes from backups; project deadlines can usually flex by days.
How long and how costly a shutdown is.
- Project models and licenses tied to an on-site server
- Cloud collaboration platforms with versioned backups
Premises liability
ModerateDesigners walk sites they do not control, and plaintiffs argue they directed the work or should have stopped hazards.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Contracts giving the designer authority over means, methods or site safety
- Construction management or design-build services
- Drone surveys flown over public roads and neighbors
- Contract wording limiting site role to observing conformance with the design
- Site visit reports that record observations without directing contractors
Products and completed work
ModerateDesign is a service, but design-build work, prototypes and specified products blur into completed-work claims.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Firm builds, fabricates or supplies components as well as designing them
- Software, apps or prefabricated systems sold to clients
- Industrial design of children's, medical or safety products
- Separate entity and cover for any construction or fabrication arm
- Client contracts assigning testing and certification to the manufacturer
Workers’ injury
ModerateMostly desk work, with regular exposure to ladders, scaffolds, trenches, roofs and plant rooms on visits.
Injuries and illness to employees.
- Engineers entering confined spaces, bridges, towers or damaged structures
- Geotechnical drilling or materials testing done by own staff
- Site safety induction and protective equipment for all visiting staff
- No lone entry to confined spaces or unsafe structures
Commercial auto
ModerateStaff drive to sites and client meetings, sometimes long distances to remote projects.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Field engineers in company trucks carrying instruments
- Junior staff driving personal cars to sites daily
- Driving record checks and hired and non-owned auto cover
Crime and theft
LowNo cash or stock; payment is by invoice, leaving only invoice fraud and laptop theft.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Subconsultant payments changed on emailed instructions
- Call-back check before changing any payee bank details
Inland marine and equipment
ModerateTotal stations, laser scanners, drones, testing kit and laptops go to sites and sit in vehicles.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- High-value survey or scanning instruments left in vehicles overnight
- Physical models and drawings shipped to exhibitions or clients
- Scheduled floater for field instruments and drones
- Instruments brought indoors overnight
Environmental
ModerateSite investigations can disturb contaminated soil or asbestos, and designs govern drainage, tanks and treatment systems.
Pollution on or from the site or the work.
- Environmental, geotechnical or remediation design services
- Boreholes or sampling carried out by the firm's own crew
- Pollution cover built into the professional liability policy
- Hazardous material surveys required before intrusive investigation
Cyber and data
ElevatedProject files, building models and client plans live on shared platforms; ransomware or a hijacked email account stops work and diverts fees.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Drawings of secure facilities, schools or utilities held on shared drives
- Large model files exchanged through unmanaged file-sharing links
- Multi-factor login on email, collaboration and file-sharing platforms
- Versioned offline backups of project models and drawings
Professional liability
HighDesign errors, missed code items and coordination failures cost owners rework and delay, and the claims surface long after completion.
Loss or injury caused by advice, design, testing, care or another professional service.
- Structural, geotechnical or condominium work, which brings the largest claims
- Design-build or fee-capped contracts with broad indemnities
- Drawings prepared by drafters with no licensed review
- Peer review of structural and life-safety designs before issue
- Contracts limiting liability to fees or insurance limits
- Documented quality checks and sign-off by licensed staff
Umbrella and excess
HighA structural failure, collapsed balcony or failed retaining wall can kill several people and draw the designer into claims beyond primary limits.
How likely one liability event is to exhaust primary limits.
- Structural design of assembly buildings, parking decks, balconies or bridges
- Condominium and multifamily work drawing long-tail defect suits
- Project-specific policies for large or high-risk projects
- Limits and excess matched to the largest project's exposure
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Leased studios in office buildings, converted lofts or older warehouses, sometimes with a model shop, plotter room or materials lab in the same space.
- Occupancy
- Workstations, large-format plotters and paper archives, plus model making with laser cutters, foam, adhesives and resin printers in some studios.
- Protection
- Sprinklered buildings with monitored alarms, an attended and vented laser cutter with an extinguisher nearby, and drawings and models backed up off site.
- Exposure
- Loft and warehouse conversions often share floors and roofs with other trades, and older buildings have concealed spaces where fire travels between tenants.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: practice and quality
On site: field work
On site: studio and records
Refer or decline if you find
- Contract makes the designer responsible for site safety
- Design-build work run through the design firm's own policy
- Unlicensed staff sealing or signing off drawings
- Drones flown commercially by uncertified pilots
- Structural or balcony designs issued with no independent check
How UrbanStat data helps.
The studio itself is a modest exposure: flood or earthquake damage to servers, plotters and archives, and theft of computers. Projects lie elsewhere, so the firm's own address says little about its liability.
- Flood and earthquake scores at the studio address show the exposure of servers, plotters and drawing archives before contents terms are set.
- Crime scores at the address inform theft terms for offices and vehicles holding survey instruments, drones and high-end workstations.
- Parcel and permit data give the studio building's age and permit history, worth checking where a firm has fitted an older loft with a laser-cutting model shop.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
0.3 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.
0.2 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Architectural services (NAICS 54131), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
20 fatal work injuries in 2024, most often from transportation incidents (11).
United States, private industry, 2024. Industry: Architectural, Engineering, and Related Services (NAICS 5413), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries.
133 citations from 66 inspections; 41% were classed serious, willful or repeat.
- 1910.147 The control of hazardous energy (lockout/tagout)9
- 1926.652 Requirements for protective systems6
- 1926.501 Duty to have fall protection4
- 1910.28 Duty to have fall protection and falling object protection4
- 1910.132 General requirements (personal protective equipment)4
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Engineering Services (NAICS 541330). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
3,340 fires a year reported in office properties, causing about $112 million in direct property damage a year.
- Cooking equipment29%
- Electrical distribution and lighting equipment12%
- Heating equipment11%
- Intentional10%
Leading causes, share of fires.
United States, 2007 to 2011, annual average. Source: National Fire Protection Association, U.S. Structure Fires in Office Properties.
1 facilities reported toxic chemical releases.
United States, 2024. Industry: Engineering Services (NAICS 541330). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Drone liability
- Site surveys and inspections by drone are excluded from most general liability forms and need aircraft cover.
- Valuable papers and records
- Archived drawings and models for past projects are costly to recreate and may be needed to defend claims.
- Hired and non-owned auto
- Staff drive personal cars to sites and meetings, and the firm is named when they crash.
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 541310 | Architectural Services |
| NAICS 2022 | 541330 | Engineering Services |
| NAICS 2022 | 541320 | Landscape Architectural Services |
| NAICS 2022 | 541340 | Drafting Services |
| NAICS 2022 | 541420 | Industrial Design Services |
| SIC 1987, primary | 8712 | Architectural Services |
| SIC 1987 | 8711 | Engineering Services |
| SIC 1987 | 0781 | Landscape Counseling and Planning |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.