What is COPE in property insurance?

COPE means construction, occupancy, protection and exposure: the four headings of a property submission. What each covers and how a statement of values carries it.

Updated November 2026

PermitsBuilding valueConstruction dateParcel boundaryAll 50 states
In short

COPE stands for construction, occupancy, protection and exposure. It is the standard way commercial property underwriters describe a building: what it is made of, what goes on inside it, what would detect or stop a loss, and what around it could cause or spread one. COPE information usually arrives in the statement of values (SOV), one row per building.

The four parts of COPE

PartWhat it coversTypical fields
ConstructionWhat the building is made of and how it is builtConstruction class, year built, stories, floor area, roof covering and age, updates to wiring, plumbing and heating
OccupancyWhat happens inside the buildingBusiness type and NAICS code, processes, hazardous materials, storage height, vacancy, other tenants
ProtectionWhat would detect or stop a lossSprinklers and how much of the building they cover, alarms and monitoring, fire department and hydrant distance, security, housekeeping
ExposureWhat outside the building could cause or spread a lossNeighboring occupancies and distance to them, wildfire, flood, wind, hail and earthquake hazard, distance to the coast, crime

Construction

Construction decides how fast a fire spreads and how much of a building survives wind, hail or an earthquake. Underwriters work from six broad classes, from frame (combustible walls and roof) through joisted masonry and noncombustible to fire resistive.

Year built and later updates matter as much as the class. An old building with new wiring and a new roof can be a better risk than a newer one that has been neglected. The roof is recorded separately, because its covering, age and attachment decide most wind and hail losses.

Occupancy

Occupancy is usually the biggest driver of a commercial property risk. The same masonry building is a modest fire risk as an office and a severe one as a woodworking shop, because occupancy sets the fuel load, the ignition sources and how much the business would lose while it is closed.

This is why COPE starts from the business type. UrbanStat’s industry risk guides give a COPE summary, a property rating and an inspection checklist for each of 747 business types, by NAICS and SIC code.

Protection

Private protection is what the insured controls: automatic sprinklers suited to the hazard, monitored alarms, hot work and housekeeping rules. Public protection is the fire service: how far away the responding station is, whether it is staffed or volunteer, and how far the nearest hydrant is.

A sprinkler system only earns credit if it covers the whole building, suits what is stored there, and is tested and maintained.

Exposure

Exposure covers what is outside the walls: the neighbors (a restaurant next to a paint store is exposed to that store), the natural hazards at the location, and the carrier’s own accumulation nearby.

It is the part of COPE that location data answers best, because it depends on the address rather than on what the applicant reports. Typing an address, a policy number or coordinates into UrbanStat returns its hazards, its surroundings and the carrier’s existing exposure nearby; see property data for underwriting.

The statement of values (SOV)

The statement of values is the schedule a commercial insured or broker submits, with one row per building. It is where COPE information usually arrives, and its quality decides how quickly a submission can be worked. A complete SOV has at least these columns:

ColumnWhy the underwriter needs it
Location number and full street addressTo geocode each building and attach hazard and exposure data.
Occupancy and business typeTo set the fire load and the business interruption exposure.
Construction class, year built, stories and floor areaTo judge how the building behaves in a fire or storm, and to test the values.
Roof covering and year last replacedWind and hail losses depend on the roof more than on anything else.
Sprinklers (share of the building covered) and alarmsProtection credits and the largest likely loss depend on them.
Building, contents and business income valuesThe insured values the premium is charged on, which should reflect replacement cost.

Values are where an SOV most often goes wrong. Building values carried forward from earlier years fall behind rebuilding costs, and the property ends up underinsured. Comparing the value per square foot with the construction class and year built is the quickest test of whether a location is insured to value.

Common questions

What does COPE stand for in insurance?

Construction, occupancy, protection and exposure: the four headings commercial property underwriters use to describe a building and its risk.

What is COPE information?

The details a property underwriter needs about each building under those four headings: construction class, year built and roof; what the business does inside; sprinklers, alarms and fire service; and the hazards and neighbors around it.

What is a statement of values in insurance?

A schedule, usually a spreadsheet, listing every location a commercial insured wants covered, with its address, COPE details and insured values. It is the main source of the information a property underwriter works from.

Which part of COPE matters most?

Usually occupancy, because it sets the fuel load, the ignition sources and the business interruption exposure. Exposure carries more weight where wildfire, flood, hail or wind hazards are high.

Is COPE used for homeowners insurance?

Not usually by that name. Homeowners applications ask about the same things, construction, roof, use, protection and surroundings, but the term COPE belongs to commercial property underwriting.

Next step

See it on your own portfolio.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →