Shoe manufacturers
Shoe manufacturers cut uppers, stitch them, shape them over lasts and attach soles by cementing, molding or stitching. Solvent adhesives and primers are used along the whole line beside foam, rubber and leather dust, and footwear sold for safety or sport brings performance claims.
Where losses come from.
- 01
Fires fed by solvent cements, primers, foam and rubber stock
- 02
Hand and finger injuries at cutting presses, lasting and sole-pressing machines
- 03
Claims that safety, slip-resistant or athletic footwear failed in use
- PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Low, 1 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.
- Knitted uppers, direct-injected soles and printed midsoles cut stitching and cementing labor, but bring costly computer-controlled machines whose loss stops a whole style range.
- The move from solvent cements to water-based and hot-melt adhesives lowers fire and vapor exposure, provided bond strength is proven for every sole material.
- Own-brand online sales put the factory's name on returns and injury claims directly, and add customer and card data to protect.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
HighFlammable cements and primers are open at many stations, near heat-setting ovens, foam, rubber, cartons and buffing dust.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Solvent adhesives applied at open benches along the line
- Sole roughing and buffing dust collected without spark protection
- Polyurethane or rubber sole molding with foam and chemical storage
- Piped or closed-container adhesive supply with local exhaust at each station
- Sprinklers designed for foam, rubber and boxed shoe storage
- Water-based or hot-melt adhesives adopted where bonds allow
Business interruption
ElevatedLasts, cutting dies and sole molds are made for each style and size, and a season's orders are lost while they are remade.
How long and how costly a shutdown is.
- Molds and lasts stored in one place with no duplicates
- Sales concentrated in seasonal collections for a few retailers
- Digital patterns and mold drawings held off site
- Second plant or contract factory approved for main styles
Premises liability
LowFactories are closed to the public apart from an occasional outlet store.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Factory outlet or fitting service on site
- Outlet customers kept out of production and storage areas
Products and completed work
ElevatedProtective toe caps, slip-resistant soles, electrical ratings and children's fittings are all promises that lead to injury claims when they fail.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Safety or occupational footwear sold with certified ratings
- Sole bonding failures and delamination complaints
- Children's shoes with small trims or light-up soles holding button batteries
- Accredited laboratory testing of protective and slip-resistance properties by batch
- Bond strength checks on every production lot
- Traceable lot numbers and retained test records
Workers’ injury
ElevatedClicker presses, lasting machines and sole presses crush hands, and solvent vapor, isocyanates and dust affect lungs and nerves.
Injuries and illness to employees.
- Hexane or toluene cements used without extraction
- Presses with bypassed two-hand controls
- Repetitive stitching and lasting at piece rates
- Local exhaust with air monitoring at cementing and priming
- Two-hand controls and light guards on presses
- Job rotation and adjustable benches on stitching lines
Commercial auto
LowShoes ship by carrier in cartons; the factory itself runs almost no vehicles.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Own truck moving components between plants
- Driver record checks for any company vehicle
Crime and theft
ModerateBranded and athletic shoes are a popular target for staff pilferage and dock theft.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Limited-edition or branded athletic lines in open storage
- Single shoes or pairs leaving through staff exits
- Caged storage for high-demand lines with camera coverage
- Carton counts reconciled at packing and loading
Inland marine and equipment
ElevatedBoxed branded footwear is a favored target of cargo thieves, and uppers, soles and molds travel between plants and contractors.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Truckloads of branded footwear left overnight in unsecured yards
- Component stitching sent to outside workshops
- Vetted carriers, sealed trailers and tracked loads
- Processing floater for uppers and components at contractors
Environmental
ElevatedSolvent adhesives, primers, mold-release agents and isocyanates produce vapor emissions and drums of hazardous waste.
Pollution on or from the site or the work.
- Solvent emissions vented with no abatement near housing
- Waste adhesive and solvent stored outdoors without containment
- Fluorinated water-repellent treatments on uppers, past or present, reaching wastewater
- Low-solvent adhesive systems and emission permits kept current
- Hazardous waste store with secondary containment and licensed collection
Cyber and data
ElevatedAutomated knitting, cutting and molding run from design files and order systems, and ransomware during a season's build stops shipments to retailers.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Cutting tables, knitting machines and molding presses on the office network
- Own-brand web store holding customer and card data
- Style designs and patterns shared with brands by email
- Production machines segmented from office and internet-facing systems
- Offline backups of patterns, mold files and order data, tested by restore
- Multi-factor login for remote access, email and the web store
Professional liability
LowFactories make to brand specifications; failures of safety or performance footwear fall under products rather than professional service.
Loss or injury caused by advice, design, testing, care or another professional service.
- Design or fit development sold to brands as a paid service
- Written terms limiting responsibility for designs the client approves
Umbrella and excess
ElevatedA failed electrical-hazard boot can be fatal, and a sole bonding defect across a widely sold style brings many fall claims at once.
How likely one liability event is to exhaust primary limits.
- Electrical-hazard or protective footwear sold for high-risk trades
- Large volumes of one children's style sold through major retailers
- Batch test records retained and linked to lot numbers
- Contractual indemnity and insurance from component and sole suppliers
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Older multistory brick mills or newer single-story steel and masonry plants, often with mezzanines, combustible roof insulation and additions that the sprinkler system may not reach.
- Occupancy
- Solvent cementing and priming at open benches, heat-setting ovens, polyurethane and rubber sole molding, buffing dust, and high-piled cartons of foam-rich finished shoes.
- Protection
- Sprinklers designed for foam and boxed footwear, local exhaust at cementing, a cut-off flammable liquids room, spark-protected dust collection outdoors, and monitored alarms and cameras.
- Exposure
- Industrial parks and older mill districts with close neighbors; cartons and pallets against walls and trailer yards full of finished goods add fire and theft exposure.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: products and process
On site: fire protection
On site: people and machinery
On site: stock and records
Refer or decline if you find
- Open cans of solvent cement at every bench with no extraction
- Buffing dust collector indoors, unprotected, beside adhesive stores
- Safety ratings claimed without current test certificates
- Foam and boxed stock piled above sprinkler design height
- Press safety controls bypassed
How UrbanStat data helps.
Cartoned shoes, leather and foam soak up flood water and cannot be salvaged. Large lightweight factory and warehouse roofs are exposed to wind and tornado, and branded stock makes yards and loading docks a theft target.
- Crime scores at the address indicate theft pressure on warehouses and trailer yards holding branded footwear awaiting dispatch.
- Flood scores at the address show whether cartoned stock, leather and floor-mounted machinery are exposed, since soaked footwear has no salvage value.
- Parcel and permit data provide the building's construction date and addition permits, a prompt to confirm sprinklers were extended into newer storage areas.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
3.3 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.
1.3 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Footwear manufacturing (NAICS 3162), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
17 citations from 3 inspections; 76% were classed serious, willful or repeat.
- 1910.1200 Hazard communication3
- 1910.132 General requirements (personal protective equipment)2
- 1910.141 Sanitation1
- 1910.212 General requirements for all machines1
- 1910.303 General (electrical)1
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Footwear Manufacturing (NAICS 316210). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
4 facilities reported toxic chemical releases totaling 7,046 pounds on and off site.
- Zinc compounds6,294
- Diisocyanates752
Chemicals released in the largest amounts, in pounds.
United States, 2024. Industry: Footwear Manufacturing (NAICS 316210). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Product recall
- A failed batch of safety or children's footwear must be traced and pulled from many retailers at once.
- Equipment breakdown
- Injection molding presses, knitting machines and heat-setting ovens fail without fire and halt a whole style range.
- Stock throughput
- Components and finished pairs move between plants, contractors, ports and warehouses, and one policy can follow them.
- Pollution legal liability
- Solvent vapor releases and spills of adhesive waste are excluded from general liability, and cleanup costs fall on the plant.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.