Shipbuilding and repair yards
Shipyards build, convert and repair steel and aluminum vessels, from barges and tugs to cargo and naval ships, on building ways, dry docks and repair berths. Hot work inside hulls, heavy lifts and work over water make fire and worker injury severe, and customers' ships sit in the yard's care.
Where losses come from.
- 01
Fires and explosions from hot work in tanks, engine rooms and holds with fuel or gas
- 02
Falls, crush injuries and toxic exposures among workers in confined hull spaces and on staging
- 03
Damage to customers' vessels in dry dock, alongside or on sea trials
- PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Elevated, 3 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Severe, 5 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Severe, 5 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: High, 4 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
- Vessels running on gas, methanol, hydrogen or large battery banks bring new fire, explosion and testing hazards into repair and outfitting work.
- Retiring skilled welders and fitters leave yards relying on younger crews and more subcontractors, which raises injury frequency and quality escapes.
- Tighter limits on what dry docks and blasting areas may discharge raise cleanup costs and penalties whenever grit, paint or bilge water reaches the harbor.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
HighHot work runs on every shift beside paint, fuel and insulation, floating docks can sink, and cranes and shops stand on an exposed waterfront.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Floating dry docks with deferred hull, pump or ballast system surveys
- Paint, gas cylinders and fuel stored on piers among hot work
- Timber piers, wooden staging or older combustible shop buildings
- Dry dock structure and ballast systems surveyed on a regular schedule
- Hot work permits with a fire watch that continues after work stops
- Fire mains and hydrants along every pier and dry dock
Business interruption
HighA sunk or damaged dry dock or a failed gantry crane stops most of the yard's work, and replacements take a very long time.
How long and how costly a shutdown is.
- One dry dock or building way carrying most of the revenue
- Fixed-price newbuild contracts with liquidated damages for late delivery
- Crane and dry dock spares and service contracts in place
- Contract terms that excuse delay after physical loss or storm
Premises liability
ElevatedVessel crews, owners' surveyors and many subcontractors work alongside yard staff, and a fire can spread to ships at neighboring berths.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Many subcontractors on board without a common safety plan
- Vessel crews living aboard during repairs
- Contractor prequalification, certificates and hold-harmless agreements
- A single permit system covering every party working on board
Products and completed work
ElevatedA faulty hull repair, weld or fuel piping job can flood or fire a vessel at sea, injuring crew and spilling fuel.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Passenger vessels, ferries or tankers among newbuilds and repairs
- Repairs done to the owner's instructions without surveyor sign-off
- Surveyor and owner inspection signed off before redelivery
- Weld and pressure test records kept for every repair
Workers’ injury
SevereWelders and fitters work in confined, poorly ventilated tanks, on high staging and under heavy lifts, where fatal falls and explosions recur.
Injuries and illness to employees.
- Confined tank entry without gas-free certificates or atmospheric testing
- Staging and open hatches without guardrails
- Work over water that brings maritime compensation rules instead of ordinary comp
- A competent person testing spaces before entry and on every shift
- Engineered staging and fall protection around hatches and edges
- Fume extraction and respiratory protection for welding and blasting
Commercial auto
ModerateYard transporters and cranes stay on site; road vehicles are mainly pickups, crew vans and parts runs.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Crew vans carrying riding gangs to ships at other ports
- Driver checks and journey planning for traveling repair crews
Crime and theft
ModerateCopper cable, bronze propellers and fittings, tools and scrap draw theft from open waterfront yards.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Scrap and nonferrous metal sold without weighed tickets
- Fenced, lit and camera-monitored yard with gate control
Inland marine and equipment
SevereCustomers' high-value ships sit in dry dock and alongside under the yard's care, while floating docks and cranes carry large values themselves.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Docking large vessels near the dry dock's rated lifting capacity
- Repair contracts accepting full liability for the customer's vessel
- Vessels taken on sea trials or shifted by yard crews
- Docking plans, block loads and ballast calculations checked for every vessel
- Repair terms limiting liability per incident and requiring owners' hull cover
- Licensed masters and agreed procedures for every sea trial
Environmental
HighBlasting, antifouling paint, bilge oil, fuel and asbestos from old ships all sit at the water's edge, where spills reach the harbor.
Pollution on or from the site or the work.
- Open blasting or spray painting in dry docks without containment
- Ships with asbestos, residues or dirty tanks taken in for repair or scrapping
- Containment curtains and grit recovery during blasting
- Dry dock floor cleared of grit and paint before flooding
- Licensed removal of asbestos and tank residues with disposal records
Cyber and data
ElevatedNaval and commercial design data, project schedules and networked cranes and docks are targets, and defense work brings strict security duties.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Defense contracts with controlled technical data on shared systems
- Remote access to crane or dock controls left open for vendors
- Segmented networks with multifactor authentication for remote access
- Offline backups of design and project data, tested by restore
Professional liability
ModerateSome yards design vessels or write repair specifications, but most claims from that work arrive as products or vessel damage claims.
Loss or injury caused by advice, design, testing, care or another professional service.
- Naval architecture or engineering services sold to outside owners
- Design reviews and approvals by qualified naval architects recorded
Umbrella and excess
HighA tank explosion killing several workers, a fire spreading through berthed ships or a capsized newbuild can exceed primary limits.
How likely one liability event is to exhaust primary limits.
- Large numbers of subcontractor workers on one vessel
- Tankers or gas carriers repaired with cargo tanks not gas free
- Gas-free certificates before any hot work on tank vessels
- Contracts that pass liability to subcontractors with their own limits
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Large steel fabrication halls and older combustible shops beside piers, building ways, graving or floating dry docks, with heavy gantry cranes and open-sided storage sheds.
- Occupancy
- Plate cutting, welding, blasting and painting go on around the clock, with fuel, gas cylinders, insulation and outfitting materials crowded into hulls under repair.
- Protection
- Fire mains and hydrants along piers and docks, sprinklered shops, a trained yard fire team or fire boat access, hot work permits and secured gates.
- Exposure
- Yards stand on the waterfront next to ports, fuel terminals and other berths, so a fire or spill spreads both ways and storms hit everything at once.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: work in the yard
On site: docks, cranes and piers
On site: people
On site: storm and records
Refer or decline if you find
- Hot work in tanks without gas-free certification or continuous monitoring
- Floating dry dock surveys overdue or ballast pumps out of service
- Repair contracts accepting unlimited liability for customers' vessels
- No written storm plan for docks, cranes and vessels in the yard
- Ship scrapping with asbestos or residues and no licensed abatement
How UrbanStat data helps.
Every yard sits at the water's edge, so surge, wind and flooding hit docks, cranes, shops and customers' vessels together. Cranes can run along their rails in high winds, and earthquakes weaken waterfront fill.
- Live hurricane tracks and storm surge overlays show which insured yards, dry docks and vessels in care sit in the path, so storm plans can be checked early.
- Storm surge and hurricane scores at the yard address, not the postal code, inform terms for docks, cranes and customers' vessels in care.
- Street-by-street exposure views show how much insured value sits along one waterfront, across yards, terminals and berthed vessels, with alerts at a set threshold.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
4.8 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.
2.0 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Ship building and repairing (NAICS 336611). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
8 fatal work injuries in 2024, most often from contact with objects and equipment (5).
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Ship and Boat Building (NAICS 33661), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
268 citations from 77 inspections; 61% were classed serious, willful or repeat.
- 1910.134 Respiratory protection24
- 1910.305 Wiring methods, components, and equipment for general use21
- 1915.152 General requirements (personal protective equipment (ppe))20
- 1910.1200 Hazard communication15
- 1910.178 Powered industrial trucks14
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Ship Building and Repairing (NAICS 336611). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
56 facilities reported toxic chemical releases totaling 2.1 million pounds on and off site.
- Xylene681,304
- N-butyl alcohol337,801
- Manganese198,419
Chemicals released in the largest amounts, in pounds. 42 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Ship Building and Repairing (NAICS 336611). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Ship repairers legal liability
- Damage to customers' vessels in dock or alongside falls outside general liability and needs marine cover.
- Longshore and maritime employers cover
- Yard workers on piers, docks and vessels fall under a separate maritime compensation scheme, and sea trial crews can bring seamen's claims.
- Builders risk
- Vessels under construction carry large, rising values through launch and sea trials until delivery.
- Protection and indemnity for trials
- Sea trials and vessel shifting by yard crews create collision, crew and pollution liabilities afloat.
- Equipment breakdown
- Dry dock pumps, gantry cranes and large transformers fail mechanically and stop work without any fire.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.