Rubber product manufacturersNAICS 326291 · SIC 3061

Rubber product manufacturers mix natural and synthetic rubber with carbon black, oils and curing agents, then mill, extrude, mold and cure it into seals, gaskets, hoses, belts, mounts, rollers and mats. Mixing and curing bring fire and machinery hazards, and a failed seal or hose causes leaks, fires and crashes downstream.

NAICS 326291 Rubber Product Manufacturing for Mechanical UseSIC 3061 Molded, Extruded, and Lathe-Cut Mechanical Rubber GoodsNAICS 326220 Rubber and Plastics Hoses and Belting ManufacturingNAICS 339991 Gasket, Packing, and Sealing Device Manufacturing+4 more codes

Manufacturing · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Fires in internal mixers, curing ovens and dust collectors, fed by stored rubber

  2. 02

    Hands and arms caught in mill nips, calenders and molding presses

  3. 03

    Seals, hoses and belts that fail in vehicles, hydraulics or process plants

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Electric vehicles need new seals, coolant hoses and battery gaskets, pushing molders into unfamiliar compounds with higher product liability stakes.
  • Restrictions on certain curing chemicals and fluorinated compounds force reformulation, raising the chance of under-tested parts reaching the field.
  • Presses with sensors and robotic loading cut hand injuries at the mold but tie output to networked controls.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

High
Rubber dust, process oils and solvent cements meet hot mixers and curing ovens, and stored rubber burns hot with dense smoke.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Solvent cements or rubber solutions mixed on the main production floor
  • Carbon black and rubber dust built up in ducts and on beams
  • Compound and finished goods stacked high in cartons in unsprinklered areas
Controls that matter
  • Dust collection with spark detection and scheduled duct cleaning
  • Solvent mixing in a separate, ventilated, fire-rated room
  • Sprinklers designed for rubber storage at its actual height

Business interruption

High
Internal mixers and large presses are long-lead items, customers' molds are unique, and vehicle makers hold little buffer stock.

How long and how costly a shutdown is.

Watch for
  • One internal mixer feeding every molding and extrusion line
  • Customer molds that cannot be duplicated quickly
Controls that matter
  • Mixed compound available from a toll mixer or sister plant
  • Drawings and duplicate tooling kept for high-volume parts

Premises liability

Moderate
Plants see few visitors; exposure comes from belt splicing and hose fitting at customers' sites and smoke reaching neighbors.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Conveyor belt installation and splicing done at mines and plants
Controls that matter
  • Written procedures, lockout and permits for all field belt work

Products and completed work

High
Seals, hoses and belts are safety-critical parts: one failure leaks fuel, releases hydraulic pressure or drops a conveyor load.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Parts sold into brakes, fuel systems, aircraft, medical devices or children's products
  • Compound or raw material changes made without customer approval
  • High-pressure hydraulic hose assembled with fittings in house
Controls that matter
  • Lot traceability from finished part back to compound batch
  • Burst, pressure and aging tests on every production lot
  • Formal change approval with customers before altering compounds

Workers’ injury

High
Two-roll mills, calenders and presses crush and amputate hands, and workers lift heavy slabs and rolls in hot, dusty conditions.

Injuries and illness to employees.

Watch for
  • Mills without body bars or trip wires that stop the rolls
  • Hand loading and unloading of hot compression presses
  • Rubber fume and dust exposure in mixing and curing areas
Controls that matter
  • Mill and calender emergency stops tested at the start of every shift
  • Two-hand controls and light curtains on presses
  • Local exhaust ventilation over mixers, curing presses and ovens

Commercial auto

Moderate
Parts ship by carrier, with some urgent runs to nearby customers and sales trips to vehicle and equipment makers.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Rush deliveries in staff cars to keep a customer's line running
Controls that matter
  • Driving record checks for staff who make urgent deliveries

Crime and theft

Low
Rubber parts and compound have little resale value, and sales are invoiced to trade customers.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Requests to change supplier bank details by email
Controls that matter
  • Call-back checks before changing any supplier's payment details

Inland marine and equipment

Elevated
Customer-owned molds fill the plant, often worth more than the presses, and travel out for repair and engraving.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Molds owned by customers with no written agreement on who insures them
  • Belting and hose stock held at customers' sites
Controls that matter
  • Mold register with owners, values and storage locations
  • Bailment terms agreed in writing with each mold owner

Environmental

Moderate
Process oils, solvent emissions, carbon black and mold-release runoff are the issues, in modest volumes at most plants.

Pollution on or from the site or the work.

Watch for
  • Solvent-based cements used with no vapor capture
  • Scrap rubber piled outdoors
Controls that matter
  • Drums and oils stored on diked pads with spill kits
  • Scrap rubber sent to a licensed recycler on a schedule

Cyber and data

Elevated
Vehicle and equipment buyers link orders, schedules and quality data to the plant, and an outage halts just-in-time shipments.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Customer ordering links running on old, unpatched servers
Controls that matter
  • Offline backups of schedules, recipes and quality records, with separate press networks

Professional liability

Low
No professional service is sold; compound and seal design advice comes with the part, so failures fall under products.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Engineering, testing or failure analysis billed to customers as a separate service
Controls that matter
  • Written scope and liability terms for any engineering or testing sold separately

Umbrella and excess

High
A failed brake, fuel or hydraulic part can cause fatal crashes or fires across many vehicles or machines.

How likely one liability event is to exhaust primary limits.

Watch for
  • Sales to vehicle, aircraft or medical device makers
  • Predecessor lines that made asbestos gaskets, packing or brake parts
Controls that matter
  • Contracts that cap liability and set out who owns the design
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Single-story steel or masonry plants, often older with later additions, housing mixing rooms, press halls, curing ovens and warehouses under one roof with few fire walls.
Occupancy
Rubber, carbon black, oils and curing chemicals mixed hot in internal mixers, then milled, extruded, molded and cured in heated presses, ovens and autoclaves.
Protection
Sprinklers designed for rubber storage, spark detection in dust collectors, separate solvent rooms, guarded mills with tested stops, and monitored alarms.
Exposure
Industrial parks put rubber plants beside other manufacturers; smoke from a rubber fire travels far, and a neighbor's fire spreads through shared walls.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: mixing and processing

On site: machine safety

On site: storage and premises

On site: quality and records

Refer or decline if you find

  • Mills with no working body bar or emergency stop
  • Solvent cement mixing on the open production floor
  • Heavy carbon black or rubber dust deposits overhead
  • Compound changes on safety-critical parts without customer approval
  • No lot traceability from finished parts to compound batches
05 / Location

How UrbanStat data helps.

Wide single-story plants with lightweight roofs take tornado, wind and hail damage, and water on mixers and electrical cabinets causes long outages. Low-lying plants lose press pits and compound stock to flooding.

TornadoWindHailFlood
  • Hail and tornado scores at the address show the threat to wide, lightweight plant roofs before roof age and covering are reviewed.
  • Parcel and permit data give the construction date and recent additions, a quick check on whether storage areas grew beyond sprinkler coverage.
  • A risk analysis API returns location scores in seconds, so property checks on rubber plant submissions run inside the quoting workflow.
Tornado · Wind · Hail · Flood
06 / Public loss data · NAICS 326291

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

2.5 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Rubber product manufacturing for mechanical use
2.5
All private industry
2.3

0.8 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Rubber product manufacturing for mechanical use (NAICS 326291). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

7 fatal work injuries in 2024.

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Rubber Product Manufacturing (NAICS 3262), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

69 citations from 16 inspections; 58% were classed serious, willful or repeat.

  • 1910.147 The control of hazardous energy (lockout/tagout)
    12
  • 1910.212 General requirements for all machines
    7
  • 1910.134 Respiratory protection
    7
  • 1910.1200 Hazard communication
    5
  • 1910.303 General (electrical)
    3

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Rubber Product Manufacturing for Mechanical Use (NAICS 326291). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

65 facilities reported toxic chemical releases totaling 1.1 million pounds on and off site.

  • Zinc compounds
    396,031
  • Toluene
    155,104
  • Sodium nitrite
    106,740

Chemicals released in the largest amounts, in pounds. 22 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Rubber Product Manufacturing for Mechanical Use (NAICS 326291). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Product recall
Vehicle and equipment makers recall whole model runs over one failed seal or hose and pass the cost back.
Equipment breakdown
Internal mixers, steam autoclaves and press hydraulics fail without fire, stopping every downstream line until repaired.
Contingent business interruption
Synthetic rubber, carbon black and specialty curing chemicals often come from very few suppliers.
Property of others (customer molds)
Customer-owned molds are often excluded or sublimited on the plant's property form unless scheduled with values.

NAICS and SIC codes for rubber product manufacturers

SystemCodeIndustry
NAICS 2022, primary326291Rubber Product Manufacturing for Mechanical Use
NAICS 2022326220Rubber and Plastics Hoses and Belting Manufacturing
NAICS 2022339991Gasket, Packing, and Sealing Device Manufacturing
NAICS 2022326299All Other Rubber Product Manufacturing
SIC 1987, primary3061Molded, Extruded, and Lathe-Cut Mechanical Rubber Goods
SIC 19873052Rubber and Plastics Hose and Belting
SIC 19873053Gaskets, Packing, and Sealing Devices
SIC 19873069Fabricated Rubber Products, NEC
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →