Refrigeration contractorsNAICS 238220 · SIC 1711
Refrigeration contractors build, install and service walk-in coolers, display cases, cold rooms, ice machines and industrial ammonia or carbon dioxide plants. Customers' perishable stock depends on their work hour by hour, and the job involves brazing inside foam-insulated panels and handling toxic, flammable or high-pressure refrigerants.
NAICS 238220 Plumbing, Heating, and Air-Conditioning ContractorsSIC 1711 Plumbing, Heating, and Air-ConditioningNAICS 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance+1 more code
Where losses come from.
- 01
Customers' food, drugs or product spoiling after a failed installation or missed service fault
- 02
Brazing and cutting igniting foam-core insulated panels in cold stores and food plants
- 03
Refrigerant releases, especially ammonia, injuring workers and bystanders
- PropertyProperty: Moderate, 2 of 5; sector average 2.2; all business types 2.9.
- Business interruptionBusiness interruption: Moderate, 2 of 5; sector average 1.8; all business types 2.7.
- Premises liabilityPremises liability: High, 4 of 5; sector average 3.5; all business types 2.7.
- Products and completed workProducts and completed work: High, 4 of 5; sector average 3.8; all business types 2.6.
- Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.8; all business types 3.0.
- Commercial autoCommercial auto: Elevated, 3 of 5; sector average 3.1; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.7; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 3.2; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.5; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.0; all business types 2.7.
- Professional liabilityProfessional liability: Elevated, 3 of 5; sector average 2.3; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 4.0; all business types 3.6.
- Phase-downs of high-warming refrigerants move customers to carbon dioxide and hydrocarbon systems, bringing very high pressures, flammable charges and new training gaps.
- Remote monitoring and connected controllers now run many supermarket and cold store plants, cutting spoilage but adding cyber and wrong-setpoint exposure.
- Cold storage construction for grocery delivery and pharmaceuticals raises project values and the stock at risk when work goes wrong.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ModerateThe shop stores compressors, coils, panels and refrigerant cylinders; foam panels and flammable refrigerants raise the fire load somewhat.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Insulated panels stored in bulk indoors
- Flammable hydrocarbon refrigerants kept with oxy-fuel gear
- Cylinders segregated and secured in a ventilated area
- Panel stock limited and kept clear of hot work
Business interruption
ModerateService revenue runs from the vans; a shop loss mostly delays projects waiting on stored compressors and panels.
How long and how costly a shutdown is.
- Long-lead compressors or racks stored for a single large project
- Project equipment shipped direct to site
- Service records and customer equipment histories held off site
Premises liability
HighHot work on insulated-panel buildings causes fast, total fires, and system shutdowns for service put customers' stock at risk.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Brazing or grinding on or through foam-core sandwich panels
- Ammonia systems opened in occupied plants
- Stock left in rooms while the plant is off for repair
- Hot-work permit, panel protection and a long fire watch every time
- Pump-down, isolation and written line-opening procedure for ammonia
- Agreed plan to move or protect stock before shutdown
Products and completed work
HighA wrong setting, leaking joint or failed alarm lets a full cold room warm up over a weekend.
Harm caused by what the business sells, serves, makes, installs or repairs.
- No temperature alarm, or alarms that reach nobody after hours
- Pharmaceutical, laboratory or blood storage customers
- Retrofits to new refrigerants on old equipment
- Commissioning records with leak test, pull-down and alarm test signed off
- Service contracts that define response times and limit spoilage liability
- Remote monitoring offered and its handover documented
Workers’ injury
ElevatedTechnicians work alone on roofs and in freezers, lift compressors, and face refrigerant burns, asphyxiation and electric shock.
Injuries and illness to employees.
- Lone work in plant rooms with ammonia or carbon dioxide
- Compressor changes without lifting gear
- Personal gas detectors and respirators for ammonia and carbon dioxide work
- Lockout of electrical supply; hoists for heavy components
Commercial auto
ElevatedService vans carry cylinders, tools and parts on round-the-clock call-outs to stores and plants.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- On-call technicians driving after long shifts
- Cylinders carried loose or in unventilated vans
- Cylinder racks, ventilation and placards where required
- Fatigue rules for on-call rotations; telematics
Crime and theft
ModerateRefrigerant has become expensive and easy to resell, joining copper and tools as a theft target.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Cylinders stored in vans or an unlocked yard cage
- Refrigerant use not reconciled to jobs
- Cylinders logged by weight in and out
- Locked, alarmed storage
Inland marine and equipment
ElevatedCompressor racks, condensers and panels wait on sites for installation, and vans carry recovery units and instruments.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Rooftop condensers and racks craned into place
- Equipment stored on site before the building is secure
- Installation cover sized to the largest project
- Crane lifts contracted to a firm carrying its own cover
Environmental
ElevatedThe trade's core material is a regulated pollutant, and ammonia releases force evacuations and kill fish in nearby water.
Pollution on or from the site or the work.
- Systems with a history of repeated top-ups rather than leak repair
- Ammonia or brine discharged to drains during service
- Decommissioned equipment scrapped with charge still inside
- Leak checks and recovered refrigerant logged for each system
- Certified technicians and calibrated recovery equipment
- Ammonia purged to water and disposed of under permit
Cyber and data
ElevatedContractors remotely monitor and adjust customers' rack and cold room controllers; one compromised login can warm many sites at once.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Shared remote access accounts to supermarket and cold store controllers
- Controllers left on default passwords or open to the internet
- Individual multi-factor logins for every remote connection, removed when staff leave
- Remote setpoint changes logged and confirmed with the customer
Professional liability
ElevatedOwners rely on the firm's system designs, refrigerant retrofits and ammonia safety documents; a design error spoils stock or causes a release.
Loss or injury caused by advice, design, testing, care or another professional service.
- Ammonia or carbon dioxide systems designed in-house
- Process safety and hazard analysis documents prepared for owners
- Designs for large systems reviewed by a licensed engineer
- Written scope and limits on design and safety documentation work
Umbrella and excess
HighAn ammonia release near homes or a hot-work fire that destroys an insulated-panel cold store can exceed primary limits.
How likely one liability event is to exhaust primary limits.
- Industrial ammonia plants near homes, schools or busy roads
- Hot work in large food plants and cold stores
- Higher limits for industrial ammonia and cold store clients
- Contracts capping spoilage and consequential loss at a stated amount
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- A leased industrial unit or small steel building with an office, parts store, panel stock and a yard for vans and condensing units.
- Occupancy
- Brazing and cutting, compressor and coil repair, foam-core insulated panels, and cylinders of fluorocarbon, hydrocarbon and carbon dioxide refrigerants beside oxy-fuel gear.
- Protection
- Cylinders segregated in a ventilated cage, panel stock limited and kept clear of hot work, sprinklers or a monitored alarm, and a fenced yard.
- Exposure
- The shop adds ordinary exposure to neighbors; the larger exposure is customers' cold stores and food plants, where foam panels and ammonia surround the work.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: work performed
On site: job sites
On site: people and vehicles
On site: monitoring and records
Refer or decline if you find
- Hot work on foam-core panels without permit and fire watch
- Service contracts accepting unlimited spoilage liability
- Ammonia work by technicians with no specific training
- No refrigerant tracking or leak records
- Pharmaceutical cold storage clients with no alarm testing
How UrbanStat data helps.
Power failures after storms set every customer's stock warming at once, and the contractor cannot reach them all. Rooftop condensers are exposed to wind and hail. Ammonia plants in earthquake zones need braced piping. Refrigerant and copper invite theft.
- Hurricane and wind scores at each service-contract address show which maintained cold rooms and rooftop condensers sit in the most storm-exposed spots.
- Live event overlays during a hurricane show which service-contract sites are in the path, so spoilage exposure can be estimated early.
- Earthquake scores at industrial sites flag ammonia plants where vessel anchorage and pipe bracing merit a question.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
3.0 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.
1.1 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Plumbing, heating, and air-conditioning contractors (NAICS 23822), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
75 fatal work injuries in 2024, most often from falls, slips and trips (23).
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Plumbing, Heating, and Air-Conditioning Contractors (NAICS 23822), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
1,696 citations from 659 inspections; 53% were classed serious, willful or repeat.
- 1926.501 Duty to have fall protection118
- 1926.651 Specific excavation requirements116
- 1910.1200 Hazard communication81
- 1926.652 Requirements for protective systems62
- 1926.1053 Ladders51
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Plumbing, Heating, and Air-Conditioning Contractors (NAICS 238220). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
10 facilities reported toxic chemical releases totaling 9,986 pounds on and off site.
- Certain glycol ethers4,020
- Nitrate compounds3,716
- Manganese869
Chemicals released in the largest amounts, in pounds. 2 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance (NAICS 811310). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Care, custody or control
- The system being worked on is excluded from general liability, and insurers contest stock spoiled while it is down.
- Contractors' pollution liability
- Ammonia and refrigerant releases are pollution events that standard general liability excludes.
- Installation floater
- Compressor racks, condensers and panels wait on sites before installation and commissioning.
NAICS and SIC codes for refrigeration contractors
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 238220 | Plumbing, Heating, and Air-Conditioning Contractors |
| NAICS 2022 | 811310 | Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance |
| SIC 1987, primary | 1711 | Plumbing, Heating, and Air-Conditioning |
| SIC 1987 | 7623 | Refrigeration and Air-Conditioning Services and Repair Shops |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.