Pulp and paper mills
Pulp and paper mills cook wood chips or repulp recovered paper, then form, press and dry the fiber into reels on very large continuous machines. Recovery boilers, turbines, chemical plants and paper machines are each capable of a catastrophic loss and a shutdown lasting many months.
Where losses come from.
- 01
Boiler, turbine and paper machine breakdowns, fires and explosions
- 02
Months of lost production after damage to one critical unit
- 03
Severe injuries from machinery, steam, chemicals and confined spaces
- PropertyProperty: Severe, 5 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: Severe, 5 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: Moderate, 2 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Elevated, 3 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: High, 4 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
- Falling demand for printing grades drives conversions to packaging and tissue, bringing rebuilt machines and new processes with a higher breakdown risk while they settle in.
- Fiber packaging replacing plastic brings barrier coatings and more food-contact grades, raising products scrutiny, including over fluorinated grease-resistant treatments now being phased out.
- Retirements are thinning the ranks of experienced boiler and machine operators, and newer crews rely more on automation and remote monitoring to catch problems.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
SevereRecovery boilers can explode when water meets molten smelt; machine hoods, hydraulic systems, chip piles and roll stores all burn hard.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Recovery boiler tube leaks and overdue inspections
- Oil mist and paper dust inside dryer hoods and machine basements
- Chip piles and recovered paper bales stored in huge unbroken blocks
- Emergency shutdown and rapid-drain systems on recovery boilers, drilled regularly
- Sprinklers in dryer hoods, basements, cable tunnels and roll storage
- Infrared scanning, vibration monitoring and turbine lube oil fire protection
Business interruption
SevereOne recovery boiler, one digester line or one paper machine can carry the whole mill, and replacements are built to order.
How long and how costly a shutdown is.
- Single-line mill with no alternative pulp or power supply
- Aging machine drives and controls with obsolete spares
- Integrated converting plants downstream that depend on the mill
- Critical spares held: rolls, gearboxes, transformers and drive parts
- Planned outage program with inspection findings acted on
- Contracts to buy market pulp or swap production with sister mills
Premises liability
ModerateA fenced industrial site, with exposure from odor, emissions, truck traffic and contractors during shutdowns.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Large contractor workforces on site during annual outages
- Towns close to the mill and downwind of stacks
- Contractor prequalification and insurance requirements
- Emergency plan shared with local responders and neighbors
Products and completed work
ModeratePaper and pulp rarely injure; claims are for off-quality reels and for food-contact or medical grades.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Food-contact, medical or hygiene grades made from recovered fiber
- Grease-resistant food packaging grades treated with fluorinated chemicals
- Grade testing on every reel with traceability to the machine run
Workers’ injury
HighWorkers face in-running nips on machines and winders, steam and hot liquor burns, chemical gas releases and heavy reel handling.
Injuries and illness to employees.
- Threading the sheet and clearing breaks by hand at speed
- Hydrogen sulfide and chlorine dioxide exposure in pulping and bleaching
- Vessel entry and hot work during outages
- Automated threading and guarded nips at reels and winders
- Gas detection with alarms and escape respirators in chemical areas
- Rigorous lockout and confined-space permit systems
Commercial auto
ElevatedChip, log and finished paper hauling is heavy and constant; many mills contract it out but keep yard and shuttle trucks.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Own fleet hauling chips or logs on public roads
- Carrier vetting, insurance certificates and site traffic rules
Crime and theft
LowNo cash and nothing portable of value beyond tools, copper and spare parts.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Spares warehouse and scrap metal without inventory control
- Stores inventory system and gatehouse checks
Inland marine and equipment
ElevatedLog loaders, chip dozers and yard cranes are high-value mobile equipment, and reels ship by truck, rail and vessel.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Dozers working on chip piles without onboard suppression
- Critical spare rolls or transformers in transit or at repair shops
- Mobile equipment scheduled with fire suppression fitted
- Transit cover arranged for spares sent out for repair
Environmental
HighCooking liquors, bleaching chemicals, effluent lagoons and stack emissions create large spill and discharge potential, often beside a river.
Pollution on or from the site or the work.
- Black liquor or chemical tanks without containment near watercourses
- Aging effluent lagoons, landfills and historic contamination
- Chlorine dioxide generation and bulk chemical unloading
- Spill collection systems routing liquor back to process
- Effluent treatment monitored continuously against permit limits
- Tank integrity inspection program
Cyber and data
ElevatedDistributed controls run pulping, recovery and power together; ransomware or a control system failure can stop the whole mill at once.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Control networks reachable from business systems or by vendor remote access
- Outdated control servers and operator stations no longer patched
- Boiler safety systems sharing hardware with process controls
- Control and safety systems separated from business networks, with monitored remote access
- Offline backups of control configurations, tested during planned outages
- Independent, hardwired boiler safety shutdowns
Professional liability
LowMills sell paper and pulp to specification without advice; quality failures are a products matter.
Loss or injury caused by advice, design, testing, care or another professional service.
- Technical services or custom grade development sold to converters
- Grade specifications agreed in writing with each converter
Umbrella and excess
HighA chlorine dioxide or hydrogen sulfide release over a nearby town, or a boiler explosion with contractors on site, can be catastrophic.
How likely one liability event is to exhaust primary limits.
- Homes, schools or businesses close to the mill and downwind
- Large contractor crews on site during annual outages
- Release modeling and a community emergency plan agreed with local responders
- Contractors required to carry high limits and name the mill as additional insured
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Sprawling sites of concrete, steel and masonry buildings built over many decades, with machine basements, cable tunnels, tall boiler houses, stacks and tank farms.
- Occupancy
- Chip cooking, chemical recovery in boilers burning black liquor, bleaching with hazardous gases, steam and power generation, and paper machines with oily hoods and hydraulic systems.
- Protection
- Sprinklers in hoods, basements, cable tunnels and roll stores, a looped fire main with diesel pumps, recovery boiler emergency drains, gas detection and a trained mill fire brigade.
- Exposure
- Riverside or coastal sites beside towns that depend on the mill, with huge chip piles, bale yards and log decks open to embers and close to the buildings.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: mill profile
On site: boilers and machinery
On site: fire protection
On site: people and environment
Refer or decline if you find
- Recovery boiler with overdue inspection or known tube thinning
- Paper machine hood or basement without sprinklers
- No emergency shutdown drills for the recovery boiler
- Chemical or liquor tanks beside a river with no containment
- Outage inspection findings left unrepaired at a single-machine mill
How UrbanStat data helps.
Mills are built on rivers and coasts for process water and shipping, so flood reaches basements, pumps and motor rooms. Chip piles and wood yards face wildfire, and tall boilers, stacks and tanks are sensitive to earthquake.
- Flood scores at the address show the exposure of riverside machine basements, pump houses and electrical rooms, where water alone can stop a mill for weeks.
- Portfolio views street by street reveal how much insured value one mill site and its dependent converters represent, with alerts once a set accumulation is passed.
- Live hurricane, storm surge and wildfire overlays show which mills and wood yards are in the path, supporting early contact on shutdown and protection plans.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
3.0 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.
1.0 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Paper mills (NAICS 32212), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
5 fatal work injuries in 2024, most often from contact with objects and equipment (3).
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Paper Mills (NAICS 32212), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
28 citations from 12 inspections; 57% were classed serious, willful or repeat.
- 1910.146 Permit-required confined spaces5
- 1910.147 The control of hazardous energy (lockout/tagout)5
- 1910.261 Pulp, paper, and paperboard mills3
- 1910.178 Powered industrial trucks3
- 1910.212 General requirements for all machines1
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Paperboard Mills (NAICS 322130). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
79 facilities reported toxic chemical releases totaling 25.6 million pounds on and off site.
- Methanol10.9M
- Ammonia2.9M
- Zinc compounds2.3M
Chemicals released in the largest amounts, in pounds. 50 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Paper Mills (NAICS 322120). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Equipment breakdown
- Recovery boilers, turbines, paper machine drives and transformers fail without fire and take months to repair.
- Contingent business interruption
- Loss of a chip supplier, chemical plant or key converter idles the mill with no damage on site.
- Pollution legal liability
- Liquor spills, effluent upsets and historic lagoon contamination are excluded from general liability and costly to clean up.
- Utility service interruption
- Mills buying grid power or water stop within minutes when an outside supply fails.
- Marine cargo
- Reels and pulp bales ship by vessel and rail, and a single shipment carries a large value.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.