Portable scientific instrument manufacturersNAICS 334519 · SIC 3829

These manufacturers assemble and calibrate handheld, field and fixed instruments such as gas detectors, radiation meters, water quality analyzers and noise monitors. The plant is clean, light assembly; the exposure lies in users trusting a reading or an alarm with their lives in mines, tanks and plants.

NAICS 334519 Other Measuring and Controlling Device ManufacturingSIC 3829 Measuring and Controlling Devices, NECNAICS 334516 Analytical Laboratory Instrument ManufacturingNAICS 334515 Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals+5 more codes

Manufacturing · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Injury or death when a detector fails to alarm or reads low

  2. 02

    Loss of demonstration units and customers' instruments in transit or under repair

  3. 03

    Smoke or water damage to sensitive components and calibration equipment

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: Moderate, 2 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Moderate, 2 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Elevated, 3 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Connected detectors that stream readings and locations to cloud portals move the risk toward software faults, data security and firmware updates.
  • Wider use of drones and fixed wireless monitors for leak detection reduces some confined-space entry but puts more trust in unattended readings.
  • Lithium-ion packs in compact instruments add charging fire risk at the plant, in service vans and in customers' charging racks.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Moderate
Bench assembly, soldering and calibration carry little fire load, though stock is sensitive and test gases and lithium batteries need care.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Flammable or toxic calibration gas cylinders kept in work areas
  • Lithium battery packs charged in bulk on open benches
  • Sealed radioactive check sources without a secure store
Controls that matter
  • Gas cylinders in a ventilated, secured store with small quantities at benches
  • Battery charging on non-combustible surfaces with smoke detection
  • Monitored fire alarm and sprinklers

Business interruption

Elevated
Sensors and custom chips often come from one supplier, and purpose-built calibration rigs and certified staff are slow to replace.

How long and how costly a shutdown is.

Watch for
  • Sole-source sensor cells or detector tubes
  • One calibration laboratory supporting all production and service work
Controls that matter
  • Second-source qualification or buffer stock of sensors
  • Duplicate reference standards and documented rig designs held off site

Premises liability

Low
Visitors are few, and training courses for customers take place in classrooms.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Hands-on customer training using live test gases
Controls that matter
  • Training gases used in ventilated rooms under instructor control

Products and completed work

High
Workers enter confined spaces, mines and contaminated areas on the strength of the reading, so a missed alarm is fatal.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Life-safety gas, oxygen or radiation monitors in the range
  • Sensors with limited life and no end-of-life warning
  • Marketing claims beyond tested accuracy, range or hazardous-area rating
Controls that matter
  • Fail-safe design with sensor fault and calibration-due alerts
  • Every unit calibrated against traceable standards and certified before shipment
  • Manuals stating bump-test, calibration intervals and limits of use

Workers’ injury

Moderate
Fine assembly and calibration bring repetitive strain, solder fume and occasional exposure to test gases.

Injuries and illness to employees.

Watch for
  • Calibration with toxic gases at open benches
  • Microscope work for long unbroken periods
Controls that matter
  • Extracted calibration hoods and gas alarms in the laboratory
  • Adjustable microscope stations with scheduled breaks from fine assembly

Commercial auto

Moderate
Sales engineers and field service technicians drive to customers' plants, labs and remote sites.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Technicians carrying gas cylinders in passenger cars
Controls that matter
  • Cylinders secured in ventilated vehicles and driving records checked

Crime and theft

Moderate
Handheld instruments are small and costly, though the resale market is narrow.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Demonstration stock issued with no sign-out record
  • Units containing precious-metal sensors or radioactive sources
Controls that matter
  • Serial-number tracking of every demo and loan unit
  • Locked storage for high-value and regulated items

Inland marine and equipment

Elevated
Demonstration kits, loan units and customers' instruments in for calibration are constantly on the road, at shows and with couriers.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Sales staff carrying cases of instruments in cars
  • Customers' instruments held in volume for annual calibration
Controls that matter
  • Floater cover for demo and loan equipment anywhere
  • Intake logs and bailee cover for instruments in for service

Environmental

Moderate
Calibration gases, solder, small solvent quantities, batteries and sealed sources are the pollutants, all in modest amounts.

Pollution on or from the site or the work.

Watch for
  • Mercury or radioactive components in older product lines
  • Returned instruments contaminated by the sites they monitored
Controls that matter
  • Decontamination declaration required with every returned unit
  • Licensed disposal routes for batteries, sources and solvents

Cyber and data

Elevated
Connected detectors report to cloud fleet portals and take firmware updates, so a breach or bad update reaches customers' life-safety devices.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Cloud portals holding customers' exposure readings and worker locations
  • Firmware updates pushed without code signing or a staged release
  • Calibration records kept only in one networked database
Controls that matter
  • Signed firmware with staged rollout and a tested rollback
  • Offline backups of calibration and serial records, tested by restore
  • Multi-factor login for the fleet portal and engineering systems

Professional liability

Elevated
Customers rely on calibration certificates, repair work and advice on which detector suits a hazard to keep their workers alive.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Calibration and repair of other makers' instruments sold as a service
  • Site surveys or layouts for fixed gas detection systems
Controls that matter
  • Calibration procedures traceable to reference standards, with signed records
  • Written scope limits on advice and survey reports

Umbrella and excess

High
A failed sensor batch can contribute to several deaths in a mine, tank or plant, far beyond primary limits.

How likely one liability event is to exhaust primary limits.

Watch for
  • Detectors sold into mining, confined-space or nuclear work
  • Large fleets of one model in service sharing a common sensor
Controls that matter
  • Field failure tracking with fast customer notification
  • Supplier indemnities and insurance for sensor cells
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Single-story light industrial or office and laboratory buildings in business parks, often leased, with clean assembly rooms and calibration labs fitted inside a steel or masonry shell.
Occupancy
Electronic assembly, soldering and calibration with compressed test gases, lithium battery charging, small solvent stocks and sealed radioactive check sources; little fire load but sensitive stock.
Protection
Sprinklers, monitored smoke detection, a ventilated gas cylinder store, battery charging on non-combustible racks, locked storage for sources and controlled access to the laboratory.
Exposure
Business park neighbors share roofs and walls, and a fire or leak next door smokes out clean rooms and halts calibration of customers' instruments.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: products and use

On site: production and calibration

On site: field and service

On site: records and history

Refer or decline if you find

  • Life-safety detectors with no sensor fault or end-of-life indication
  • Units shipped without individual calibration records
  • Hazardous-area ratings claimed without independent certification
  • No record of where demonstration and loan instruments are
05 / Location

How UrbanStat data helps.

Clean, climate-controlled assembly and calibration rooms are disabled by minor water entry or a long power outage. Reference standards are irreplaceable at short notice, and small high-value stock makes burglary patterns relevant.

FloodWindEarthquakeCrime
  • Flood and wind scores at the address show whether calibration laboratories and sensitive component stock face water entry from below or through the roof.
  • Crime scores at the address inform alarm and storage requirements for compact, high-value instruments and demonstration kits.
  • Parcel and permit data give the construction date and permit history, a check on building age and on roof or mechanical work above climate-controlled calibration rooms.
Flood · Wind · Earthquake · Crime
06 / Public loss data · NAICS 334519

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

1.2 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.

Other measuring and controlling device manufacturing
1.2
All private industry
2.3

0.7 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Other measuring and controlling device manufacturing (NAICS 334519). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

6 fatal work injuries in 2024.

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Navigational, Measuring, Electromedical, and Control Instruments Manufacturing (NAICS 33451), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

39 citations from 7 inspections; 44% were classed serious, willful or repeat.

  • 1910.134 Respiratory protection
    9
  • 1910.1200 Hazard communication
    3
  • 1910.107 Spray finishing using flammable and combustible materials
    3
  • 1910.106 Flammable liquids
    3
  • 1910.132 General requirements (personal protective equipment)
    2

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Other Measuring and Controlling Device Manufacturing (NAICS 334519). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

14 facilities reported toxic chemical releases totaling 14,717 pounds on and off site.

  • Diisocyanates
    8,250
  • Methanol
    5,353
  • Lead
    947

Chemicals released in the largest amounts, in pounds. 8 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Other Measuring and Controlling Device Manufacturing (NAICS 334519). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Product recall
A faulty sensor batch means finding and replacing every affected detector quickly, across many customers' sites.
Equipment breakdown
Calibration rigs, environmental chambers and reference standards fail without fire and stop both production and service work.
Contingent business interruption
Sole-source sensor cells mean a fire at the supplier stops production of whole detector ranges.

NAICS and SIC codes for portable scientific instrument manufacturers

SystemCodeIndustry
NAICS 2022, primary334519Other Measuring and Controlling Device Manufacturing
NAICS 2022334516Analytical Laboratory Instrument Manufacturing
NAICS 2022334515Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
NAICS 2022334513Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables
NAICS 2022334514Totalizing Fluid Meter and Counting Device Manufacturing
SIC 1987, primary3829Measuring and Controlling Devices, NEC
SIC 19873826Laboratory Analytical Instruments
SIC 19873825Instruments for Measuring and Testing of Electricity and Electrical Signals
SIC 19873823Industrial Instruments for Measurement, Display, and Control of Process Variables; and Related Products
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →