Oil and gas well drilling contractors

Drilling contractors bore oil and gas wells for operating companies under day-rate or footage contracts, using land rigs that are moved from pad to pad. Crews handle heavy pipe around rotating machinery above a well that can kick, blow out and ignite.

Mining, Quarrying, and Oil and Gas Extraction · NAICS 213111 · SIC 1381 · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Crew struck by or caught between pipe, tongs and rotating equipment on the rig floor

  2. 02

    Loss of well control leading to blowout, fire and destruction of the rig

  3. 03

    Vehicle crashes on long drives to remote locations and during rig moves

How it comparesEach line’s rating against the average for its NAICS sector, Mining, Quarrying, and Oil and Gas Extraction (11 business types), and for all 747.
  1. PropertyProperty: Moderate, 2 of 5; sector average 3.4; all business types 2.9.
  2. Business interruptionBusiness interruption: High, 4 of 5; sector average 3.7; all business types 2.7.
  3. Premises liabilityPremises liability: High, 4 of 5; sector average 3.6; all business types 2.7.
  4. Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 2.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Severe, 5 of 5; sector average 4.1; all business types 3.0.
  6. Commercial autoCommercial auto: High, 4 of 5; sector average 3.3; all business types 2.5.
  7. Crime and theftCrime and theft: Moderate, 2 of 5; sector average 2.2; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Severe, 5 of 5; sector average 3.8; all business types 2.6.
  9. EnvironmentalEnvironmental: High, 4 of 5; sector average 3.9; all business types 2.3.
  10. Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.5; all business types 2.7.
  11. Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.3; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Severe, 5 of 5; sector average 4.5; all business types 3.6.
What’s changing
  • Automated pipe handling and rig control systems take hands off the drill floor, cutting crush injuries but adding costly electronics and network dependence.
  • Longer horizontal wells and higher-pressure targets extend time on each pad and raise the stakes of well control and downhole tool losses.
  • Rigs running on field gas, grid power or batteries cut diesel spills and emissions, but add gas lines, high-voltage gear and battery fire hazards.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Moderate
Fixed premises are a yard, shop and office; the rigs are mobile and rated under equipment.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Pipe, spare rig components and fuel stored at the yard
  • Welding and engine rebuilds in the shop
Controls that matter
  • Yard fenced and lit with inventory records
  • Hot work and flammable liquid controls in the shop

Business interruption

High
Each rig earns a day rate, and a rig lost to fire or blowout takes many months to replace.

How long and how costly a shutdown is.

Watch for
  • Fleet of one or two rigs
  • Most rigs contracted to a single operator
  • Contracts that stop paying during repairs
Controls that matter
  • Loss of hire cover for each rig
  • Critical spares and a preventive maintenance system

Premises liability

High
A blowout or fire injures other contractors' workers, damages the well and surface property, and tests the contract indemnities.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Footage or turnkey contracts that put well risks on the driller
  • Non-standard indemnities, or none in writing
  • Wells near homes or in sour gas areas
Controls that matter
  • Day-rate contracts with mutual indemnities reviewed by counsel
  • Blowout preventers pressure-tested on schedule with records
  • Supervisors holding current well control certification

Products and completed work

Elevated
A well handed over with poor casing or cementing support can leak or fail later, though operators carry most downhole risk.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Driller providing casing, cementing or completion services
  • Turnkey wells delivered for a fixed price
Controls that matter
  • Scope limited to drilling under the operator's well plan
  • Daily drilling reports signed by the operator's representative

Workers’ injury

Severe
Rig floor work is heavy, fast and unforgiving: crushing, falls from the derrick, struck-by injuries, toxic gas and fatigue.

Injuries and illness to employees.

Watch for
  • Inexperienced hands hired during a boom
  • Long shifts followed by long drives home
  • Manual pipe handling on older mechanical rigs
Controls that matter
  • Automated pipe handling and iron roughnecks on the floor
  • Fall arrest and escape lines for derrick workers
  • Short-service worker program and stop-work authority

Commercial auto

High
Crews drive long distances on rural roads after long shifts, and rig moves put oversize loads on highways.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Crew trucks driven home after night tours
  • Rig moves handled by own trucks
  • Personal vehicles used for company travel
Controls that matter
  • Journey management with fatigue rules and in-vehicle monitoring
  • Rig moves contracted to permitted heavy-haul carriers
  • Crew transport or on-site accommodation

Crime and theft

Moderate
Remote yards and locations lose copper, drill bits, tools and diesel; little cash is handled.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Stacked rigs left unattended for months
  • Fuel deliveries with no reconciliation
Controls that matter
  • Guarded or monitored storage for idle rigs
  • Fuel and consumables tracked against usage

Inland marine and equipment

Severe
A rig is worth a great deal and can be destroyed in minutes by blowout, fire, cratering or a collapse while raising the mast.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Older rigs with outdated blowout preventers
  • Operator's equipment and drill string in the driller's care
  • Rigs stacked in flood or storm-prone yards
Controls that matter
  • Scheduled values per rig with blowout and cratering included
  • Mast and substructure inspections by qualified engineers
  • Contract terms for downhole tool loss settled before spudding

Environmental

High
Drilling fluids, diesel, produced water and reserve pits sit on every location, and a blowout spreads oil and brine widely.

Pollution on or from the site or the work.

Watch for
  • Earthen reserve pits near water or shallow aquifers
  • Oil-based mud systems
  • Contracts silent on who pays for surface pollution
Controls that matter
  • Closed-loop mud systems and lined containment under tanks
  • Spill response plan with contractors on call
  • Pollution responsibility split clearly in the drilling contract

Cyber and data

Elevated
Rig control systems and real-time data feeds link rigs to operators' remote centers; an attack can halt drilling across the fleet.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Satellite or cellular links from rigs with shared service logins
  • Rig control systems on the same network as crew wifi
Controls that matter
  • Control networks segmented from crew and office systems
  • Offline backups and tested manual operation of rig controls

Professional liability

Moderate
Directional and turnkey work includes well planning; a misplaced wellbore or poor design costs the operator money without any injury.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Turnkey wells where the driller designs casing and mud programs
  • Directional drilling sold with steering and survey services
Controls that matter
  • Operator approval of well plans recorded before spudding
  • Contracts that cap liability for wellbore placement and leave design with the operator

Umbrella and excess

Severe
A blowout and fire can kill several workers from different contractors and damage nearby property, far beyond primary limits.

How likely one liability event is to exhaust primary limits.

Watch for
  • Sour gas or high-pressure wells near homes or roads
  • Mixed crews from many contractors on one location
Controls that matter
  • Mutual indemnities backed by required insurance limits
  • Well control drills and gas detection on every rig
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Yards hold metal shops, offices and open pipe racks; on location, rigs are steel masts and substructures with crew quarters, generators and mud tanks set up on each pad.
Occupancy
Diesel or gas engines, fuel tanks and oil-based or chemical muds sit beside a wellbore that can release flammable gas under pressure.
Protection
Tested blowout preventers with remote closing units, gas detection at the floor and cellar, engine shutdowns, spaced fuel storage and firefighting gear on location.
Exposure
Remote pads in grassland or desert far from fire service, sometimes near homes, roads or other operators' wells and production equipment.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: rig on location

On site: rigs and well control

On site: crews and vehicles

On site: yard and records

Refer or decline if you find

  • Turnkey contracts with no well control cover
  • No written indemnity agreement with operators
  • Blowout preventer tests overdue or undocumented
  • High share of workers with under a year's experience
  • Prior blowout with no change in procedures
05 / Location

How UrbanStat data helps.

Rigs stand tall on open ground in country prone to severe storms. Wind topples masts, floods isolate locations and wash out pits, and a rig fire in dry grassland can start a wildfire. Yards with stacked rigs concentrate value.

TornadoWindFloodWildfire
  • Wind and tornado scores at each drilling location and storage yard show the weather exposure of masts and stacked rigs.
  • Street-by-street exposure views show how many insured rigs are stacked in one yard or working one field, with alerts when the total passes a set limit.
  • Flood and wildfire scores for a well pad inform pollution and equipment terms before the rig moves onto location.
Tornado · Wind · Flood · Wildfire
06 / Public loss data

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

1.3 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.

Drilling oil and gas wells
1.3
All private industry
2.3

0.7 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Drilling oil and gas wells (NAICS 213111). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

13 fatal work injuries in 2024, most often from contact with objects and equipment (5).

Mining, quarrying, and oil and gas extraction
13.8
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Drilling Oil and Gas Wells (NAICS 213111). Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

66 citations from 31 inspections; 38% were classed serious, willful or repeat.

  • 1910.305 Wiring methods, components, and equipment for general use
    8
  • 1910.184 Slings
    6
  • 1910.132 General requirements (personal protective equipment)
    6
  • 1910.303 General (electrical)
    6
  • 1910.178 Powered industrial trucks
    4

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Drilling Oil and Gas Wells (NAICS 213111). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Toxic chemical releases

1 facilities reported toxic chemical releases totaling 6,612 pounds on and off site.

  • N-hexane
    3,620
  • Hydrogen sulfide
    1,681
  • Cyclohexane
    750

Chemicals released in the largest amounts, in pounds. 1 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Drilling Oil and Gas Wells (NAICS 213111). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Control of well
Regaining control of a blown-out well and redrilling it can exceed the rig's value; turnkey work shifts that cost to the driller.
Contractors pollution liability
Mud, fuel and brine spills on location fall outside general liability, and contracts often assign them to the driller.
Loss of hire
Day-rate income stops when a rig is damaged, and repairs or replacement can take many months.
Contractual liability
Mutual indemnities in drilling contracts are only as strong as the insurance standing behind them.
Underground resources and equipment
Damage to the formation, reservoir or operator's downhole equipment is usually excluded unless an endorsement adds it back.
Classification
SystemCodeIndustry
NAICS 2022, primary213111Drilling Oil and Gas Wells
SIC 1987, primary1381Drilling Oil and Gas Wells
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →