Fur garment manufacturers

Fur garment manufacturers match, cut and sew pelts into coats, collars and trims, and many also store, clean and remodel customers' furs. Small workshops hold very high values in portable goods that are ruined by heat, smoke, damp or moths, which makes theft and custody the main issues.

Manufacturing · NAICS 315250 · SIC 2371 · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Burglary, robbery and employee theft of pelts and finished garments

  2. 02

    Loss or damage to customers' furs held for storage, cleaning or alteration

  3. 03

    Smoke, water, heat or humidity damage to stock that cannot be cleaned back to value

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: Low, 1 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Moderate, 2 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: High, 4 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: High, 4 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: Low, 1 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Moderate, 2 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • A growing number of places ban fur sales or fur farming, shrinking demand and pushing workshops toward remodeling, repair and storage.
  • Shearling, faux fur and recycled fur work replace new pelts, lowering stock values but bringing synthetic fabrics and adhesives into workrooms.
  • Fewer skilled furriers remain, so the loss of a key cutter or a long closure is harder to recover from than it once was.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Elevated
Workshops have few ignition sources, but pelts and garments lose their value to slight smoke, damp, heat or vault cooling failure.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Cold storage vaults dependent on one refrigeration unit
  • Workrooms in older multi-tenant buildings with unknown neighbors
  • Cleaning with solvents or sawdust drums on the premises
Controls that matter
  • Temperature and humidity alarms on vaults, monitored off site
  • Sprinklers or gas suppression suited to the vault, with stock off the floor
  • Standby power or a contract for emergency cooling

Business interruption

Elevated
Sales cluster in a few cold months and pelts are bought at seasonal auctions, so a loss just before winter is hard to recover.

How long and how costly a shutdown is.

Watch for
  • Stock at peak value just before winter
  • Dependence on a few skilled cutters and finishers
Controls that matter
  • Stock spread between workshop, vault and outside storage
  • Peak-season limits agreed in advance

Premises liability

Low
Customers visit for fittings and storage drop-off in small numbers; the premises are quiet and controlled.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Showroom on an upper floor reached by stairs
Controls that matter
  • Entry by appointment with well-lit, maintained access

Products and completed work

Low
A fur coat has almost no capacity to injure; disputes concern workmanship and value, not bodily harm.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Mislabeling of species or origin on garments
Controls that matter
  • Accurate labeling and written work orders for remodeling

Workers’ injury

Moderate
Skilled bench work with knives, fur sewing machines and stretching boards causes cuts, punctures and some dust allergy.

Injuries and illness to employees.

Watch for
  • Fur dust and dander without extraction
  • Solvent use in cleaning and glazing
Controls that matter
  • Local exhaust at cutting and drumming
  • Guarded sewing machines and good bench lighting

Commercial auto

Moderate
A van or car makes local pick-ups and deliveries of storage furs, busiest at the start and end of the cold season.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Garments left in unattended vehicles
  • Seasonal pick-up and delivery of storage furs
Controls that matter
  • Two-person deliveries with goods never left unattended
  • Unmarked vehicles with alarms and tracking

Crime and theft

High
Pelts and coats are compact, extremely valuable, untraceable once sold and well known to professional thieves.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Ground-floor or rear-access premises with weak physical security
  • Stock left on racks outside the vault overnight
  • Many keyholders or casual staff with vault access
Controls that matter
  • Rated vault with monitored alarm, including hold-up and line security
  • Everything locked in the vault at close, with a signed count
  • Background checks and inventory tags on every pelt and garment

Inland marine and equipment

High
Customers' furs in storage, goods out at contractors and samples on the road often exceed the firm's own stock.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Storage receipts with no stated value or limit
  • Pelts sent to outside dressers, dyers and sewing contractors
  • Trunk shows, exhibitions and salespeople's samples
Controls that matter
  • Furriers' customer cover with each garment's value on a signed receipt
  • Limits per contractor and per shipment, with insured carriers
  • Garments tagged and photographed at intake

Environmental

Low
Small quantities of cleaning solvent and vault refrigerant are the only pollutants.

Pollution on or from the site or the work.

Watch for
  • On-site fur cleaning using chlorinated solvents
Controls that matter
  • Solvent waste collected by a licensed hauler

Cyber and data

Moderate
Storage records, customer addresses and card payments sit on small office systems, and losing the storage register leaves values unprovable.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Storage receipts and photos kept only on one computer
  • Alarm and camera systems reachable from the internet with default passwords
Controls that matter
  • Cloud or offline backups of the storage register and garment photos
  • Security systems on a separate network with changed passwords

Professional liability

Moderate
Furriers appraise customers' garments for storage receipts and insurance, and an inflated or careless valuation leads to disputes after a loss.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Written appraisals issued for customers' insurance schedules
  • Remodeling advice that ruins a garment beyond repair
Controls that matter
  • Appraisals based on documented condition, with photos and a stated method
  • Signed work orders describing the remodel and its accepted risks

Umbrella and excess

Moderate
No crowds and harmless products keep severe claims rare; a delivery van crash or a robbery with customers present is the worst case.

How likely one liability event is to exhaust primary limits.

Watch for
  • Showroom sales and seasonal pick-up runs in busy city traffic
Controls that matter
  • Hold-up procedures that put staff and customer safety first
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Usually upper-floor or ground-floor workrooms in older multi-tenant city buildings, with a masonry or steel storage vault built inside and a small showroom at the front.
Occupancy
Bench cutting, sewing and stretching of pelts, cleaning drums and glazing, and refrigerated vault storage of high-value garments that smoke, heat or damp ruin.
Protection
A rated, alarmed storage vault with temperature and humidity monitoring, sprinklers or gas suppression, hold-up alarms, cameras and line-secured signaling to a monitoring center.
Exposure
Neighbors' fires, leaks and break-ins through shared walls threaten the stock, and the street's robbery and burglary record shapes the whole account.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: operations and values

On site: security

On site: vault and building

On site: transit and records

Refer or decline if you find

  • Stock left outside the vault overnight
  • Storage receipts issued without stated values
  • No monitored alarm, or alarm without line security
  • Vault cooling with no temperature alarm or backup
  • Prior unexplained inventory shortages
05 / Location

How UrbanStat data helps.

The neighborhood's burglary and robbery record matters more than anything else here. Basement or ground-floor vaults flood, and a storm that cuts power for days in warm weather puts every stored garment at risk.

CrimeFloodHurricane
  • Crime scores at the address, not the postal code, show the burglary and robbery pressure on a workshop holding stock comparable to a jeweler's.
  • Street-by-street exposure views show how much insured fur stock sits in one building or district, with alerts when accumulation passes a set threshold.
  • Flood scores at the address indicate whether a basement or ground-floor storage vault holding customers' garments lies in water's path.
Crime · Flood · Hurricane
06 / Public loss data

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

2.0 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Cut and sew apparel manufacturing
2.0
All private industry
2.3

1.0 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Cut and sew apparel manufacturing (NAICS 3152), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

1 fatal work injury in 2024.

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Apparel Manufacturing (NAICS 315), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

65 citations from 16 inspections; 37% were classed serious, willful or repeat.

  • 1910.212 General requirements for all machines
    6
  • 1910.305 Wiring methods, components, and equipment for general use
    4
  • 1910.303 General (electrical)
    4
  • 1904.39 Reporting fatalities, hospitalizations, amputations, and losses of an eye as a result of work-related incidents to OSHA
    3
  • 1910.132 General requirements (personal protective equipment)
    2

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Cut and Sew Apparel Manufacturing (NAICS 3152), the closest published group. Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Furriers' block
Brings the firm's own and customers' furs at the workshop, in transit and at shows under one specialist form.
Bailee customers' goods
Customers' stored furs can outvalue the firm's own stock, and storage receipts set what the firm owes.
Equipment breakdown
Vault refrigeration and humidity control fail without fire, and warm, damp storage ruins every garment inside.
Trunk show and exhibition
Trunk shows and fairs put high values in hotels and halls, outside the vault's protection.
Classification
SystemCodeIndustry
NAICS 2022, primary315250Cut and Sew Apparel Manufacturing (except Contractors)
SIC 1987, primary2371Fur Goods
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →