Folding carton and paperboard products manufacturersNAICS 322212 · SIC 2657
Paperboard converters print, coat, die-cut, fold and glue sheets or reels of board into folding cartons, rigid boxes, cups, tubes and similar packaging, much of it for food and medicines. Presses use inks and coatings beside tons of board, and a labeling error can force a customer recall.
NAICS 322212 Folding Paperboard Box ManufacturingSIC 2657 Folding Paperboard Boxes, Including SanitaryNAICS 322219 Other Paperboard Container Manufacturing+3 more codes
Where losses come from.
- 01
Press and storage fires involving inks, coatings, solvents and paperboard stock
- 02
Mislabeled or contaminated packaging leading to customer recalls
- 03
Hand injuries at presses, die cutters, guillotines and folder-gluers
- PropertyProperty: High, 4 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.
- Brands are replacing plastic trays, clamshells and wraps with coated and molded paperboard, bringing new barrier coatings and food-contact questions to converters.
- Limits on fluorinated grease-proof coatings push converters toward newer alternatives, and past use of the older chemicals can surface in product claims.
- Serialization and tamper-evident features on medicine cartons add inline cameras and data systems, raising both quality control and cyber exposure.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
HighPresses run inks, coatings and wash solvents beside pallets of board, trim waste and paper dust; gravure and flexographic lines add flammable solvent.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Gravure or flexographic presses using flammable solvent inks
- Ink mixing and wash-up solvents kept at the press in open containers
- Die-cut waste and dust collection without spark protection
- Solvent inks stored and mixed in a ventilated, cut-off ink room
- Sprinklers throughout, matched to board storage height
- Static control, grounding and solvent vapor monitoring on presses
Business interruption
ElevatedPresses and die cutters are costly and slow to replace, but work can often be placed with other converters.
How long and how costly a shutdown is.
- Customers with approved-supplier rules that block outsourcing
- Unique tooling, dies and plates held only on site
- Reciprocal production agreements pre-approved by key customers
- Digital artwork and die drawings held off site
Premises liability
LowClosed production site with few visitors beyond customer auditors and delivery drivers.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Customer press approvals bringing visitors onto the floor
- Escorted visits with marked walkways
Products and completed work
ElevatedCartons carry the allergen, dosage and handling information for someone else's product, and cups and trays touch food directly.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Mixed cartons from similar jobs packed together
- Pharmaceutical or allergen-labeled food cartons
- Inks, coatings or recycled board not cleared for food contact
- Line clearance between jobs and camera or barcode verification on gluers
- Food-contact compliance declarations from board, ink and adhesive suppliers
- Lot traceability and a tested recall procedure
Workers’ injury
ElevatedSheet-fed presses, platen die cutters, guillotines and folder-gluers have nips and blades, and stripping waste is repetitive hand work.
Injuries and illness to employees.
- Hand stripping and packing at high rates
- Make-ready work inside die cutters without lockout
- Skin contact with energy-cured inks and coatings during wash-up
- Two-hand controls and light curtains on cutters and platens
- Automatic stripping, blanking and case packing
Commercial auto
ModerateDeliveries usually go by contract carrier; a few plants run their own trucks to local customers.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Own trucks on regular delivery routes
- Driver record checks and vehicle maintenance logs
Crime and theft
LowLittle of resale value, apart from security packaging and scrap.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Tax-stamp, coupon or brand-protection packaging that could be diverted
- Counted production and secure destruction of overruns
Inland marine and equipment
ModerateCustomers' dies, plates and artwork are held on site and finished cartons move by road to tight deadlines.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Customer-owned tooling of high value with no schedule
- Tooling register with ownership and values agreed
Environmental
ElevatedInks, coatings, cleaning solvents and adhesives generate air emissions and hazardous waste on a scale similar to commercial printing.
Pollution on or from the site or the work.
- Solvent recovery stills or oxidizers poorly maintained
- Waste ink and rags stored in open drums
- Licensed disposal with manifests, and closed solvent-rag containers
- Shift toward water-based and energy-cured inks
Cyber and data
ElevatedFood and medicine brands send artwork, regulatory text and serialization data, and ransomware on prepress or press controls stops every line.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Artwork portals and email approvals open to file tampering and invoice fraud
- Serialization or track-and-trace codes printed for medicine customers
- Multi-factor login on artwork portals and email, with offline backups
- Changes to payment details confirmed by phone with a known contact
Professional liability
ModerateSome plants design carton structures and check customers' regulatory text, so a missed error becomes a claim beyond the cost of reprinting.
Loss or injury caused by advice, design, testing, care or another professional service.
- Structural design or artwork preparation sold as a service
- Plant staff proofreading dosage or allergen text for customers
- Customer approval of every proof, with responsibility for text left with the customer
Umbrella and excess
ElevatedA mislabeled medicine carton or contaminated food packaging can harm many end users at once and bring recall and injury claims together.
How likely one liability event is to exhaust primary limits.
- Medicine, infant food or allergen-labeled packaging making up much of the work
- Camera inspection of every carton, with rejects logged and reconciled
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Single-story steel or concrete plants, sometimes older multistory brick buildings, with presses on the ground floor and board warehousing in the same fire area.
- Occupancy
- Sheet-fed offset, flexographic or gravure printing with inks and coatings, die cutting, foil stamping, folder-gluers, and trim waste conveyed to balers.
- Protection
- Sprinklers throughout matched to board storage height, a cut-off ventilated ink room, grounded presses, spark detection in trim ducts and monitored alarms.
- Exposure
- Industrial parks or older mixed industrial districts; outside storage of baled trim and pallets, and neighbors sharing walls, add fuel and routes for fire to spread.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: operations
On site: process and fire protection
On site: quality control
On site: people and records
Refer or decline if you find
- Open solvent containers and ink mixing at the press side
- No line clearance procedure between pharmaceutical or allergen jobs
- Food packaging with no supplier compliance declarations
- Interlocks defeated on die cutters or guillotines
- Artwork approved by email with no recorded customer sign-off
How UrbanStat data helps.
Board and finished cartons are destroyed by water and humidity, so flood exposure and roof condition matter more than for most factories. Food and medicine customers reject any stock exposed to smoke or floodwater.
- Flood scores at the address show whether palletized board and finished cartons stored at floor level are exposed, before stock limits are agreed.
- Parcel and permit data give construction date and roof permit history, useful where a leaking roof can spoil food-grade stock.
- Rules drawn on the map refer or decline new packaging plants in defined flood or wind areas automatically at quote and renewal.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
2.2 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.
0.8 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Folding paperboard box manufacturing (NAICS 322212). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
7 fatal work injuries in 2024, most often from contact with objects and equipment (4).
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Converted Paper Product Manufacturing (NAICS 3222), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
30 citations from 10 inspections; 63% were classed serious, willful or repeat.
- 1910.147 The control of hazardous energy (lockout/tagout)10
- 1910.212 General requirements for all machines6
- 1910.219 Mechanical power-transmission apparatus2
- 1910.151 Medical services and first aid2
- 1904.41 Electronic submission of Employer Identification Number (EIN) and injury and illness records to OSHA2
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Folding Paperboard Box Manufacturing (NAICS 322212). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
6 facilities reported toxic chemical releases totaling 69,430 pounds on and off site.
- Certain glycol ethers41,580
- Ethylene glycol15,195
- N-methyl-2-pyrrolidone12,015
Chemicals released in the largest amounts, in pounds.
United States, 2024. Industry: Folding Paperboard Box Manufacturing (NAICS 322212). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Product recall
- A wrong carton or contaminated cup can force a brand owner to recall product and pass the cost back.
- Equipment breakdown
- Presses, die cutters and folder-gluers carry costly drives and controls that fail without any fire.
- Contingent business interruption
- Board comes from a few approved mills, so one mill outage halts production when substitutes are scarce.
- Pollution legal liability
- Solvent inks, coatings and oxidizer emissions create pollution exposure that general liability forms exclude.
NAICS and SIC codes for folding carton and paperboard products manufacturers
| System | Code | Industry |
|---|---|---|
| NAICS 2022, primary | 322212 | Folding Paperboard Box Manufacturing |
| NAICS 2022 | 322219 | Other Paperboard Container Manufacturing |
| SIC 1987, primary | 2657 | Folding Paperboard Boxes, Including Sanitary |
| SIC 1987 | 2656 | Sanitary Food Containers, Except Folding |
| SIC 1987 | 2652 | Setup Paperboard Boxes |
| SIC 1987 | 2655 | Fiber Cans, Tubes, Drums, and Similar Products |
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.