Fiberglass boat buildersNAICS 336612 · SIC 3732
Fiberglass boat builders spray gelcoat into molds, lay up glass fiber with polyester resin, then fit engines, fuel systems, wiring and interiors. Styrene vapor, acetone, peroxide catalysts and resin-soaked waste make the laminating shop one of the most fire-prone workplaces in light industry.
NAICS 336612 Boat BuildingSIC 3732 Boat Building and Repairing
Where losses come from.
- 01
Fast-spreading fires in lamination areas fed by resin, solvent vapor and overspray
- 02
Loss of hull and deck molds that cannot be replaced quickly
- 03
Fires, sinkings and injuries on boats after delivery
- PropertyProperty: Severe, 5 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Elevated, 3 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: High, 4 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
- Infusion and closed-mold processes are replacing open spray layup, cutting styrene exposure and overspray fire load, though resin-soaked vacuum consumables still need careful disposal.
- Electric outboards and lithium-ion house batteries are entering new boats, adding battery fire risk in the plant, on the water and in winter storage.
- Larger outboard-powered center consoles and more powerful engines push speeds and boat values up, raising product severity and the value of each finished boat in stock.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
SevereFlammable resin and gelcoat are sprayed in the open, catalyst reacts violently with accelerators, and waste resin self-heats in bins.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Catalyzed resin waste and overspray paper left indoors overnight
- Peroxide catalyst stored with resins, accelerators or acetone
- Unsprinklered or under-designed lamination and mold storage buildings
- Sprinklers designed for flammable liquid spraying, plus high-volume ventilation
- Catalyst kept in a separate cool store, with day quantities only
- Resin waste wetted and removed to outdoor metal containers every shift
Business interruption
HighEach model depends on its own plugs and molds, and a fire that destroys them ends that product line for a season.
How long and how costly a shutdown is.
- All molds for the range stored in the laminating building
- Orders concentrated ahead of boat show and summer deliveries
- Engines from one supplier on allocation
- Molds stored in a detached, protected building when idle
- Digital hull files held off site for recutting plugs
Premises liability
ModerateBuyers tour the plant, attend sea trials and visit show stands, bringing them near open hulls, docks and water.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Customers aboard during sea trials with informal procedures
- Public launch ramp or dock shared with the plant
- Life jackets, briefings and licensed captains for every trial
- Tour routes away from lamination and lifting areas
Products and completed work
HighFuel leaks explode in closed bilges, exhaust gas poisons cabins, and hull or steering failures put families in the water.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Gasoline inboard boats with enclosed engine spaces
- High-performance or offshore models pushed past tested horsepower
- Dealers rigging engines and fuel systems after delivery
- Fuel, ventilation and electrical systems built and tested to recognized marine standards
- Capacity and horsepower plates and hull numbers on every boat
- Carbon monoxide alarms and written dealer rigging instructions
Workers’ injury
HighLaminators breathe styrene and glass dust, work bent inside hulls and climb on scaffolds around molds and unfinished decks.
Injuries and illness to employees.
- Open-mold spray layup with general ventilation only
- Grinding and trimming without dust extraction or respirators
- Access to decks by ladders rather than staging
- Closed-mold or infusion processes where the design allows
- Local exhaust, respirators and styrene air monitoring
- Fixed staging with guardrails around hulls
Commercial auto
ElevatedCompany trucks tow finished boats on trailers to dealers and shows, often as wide loads over long distances.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Over-width hulls moved without permits or escort vehicles
- Trailers and tie-downs not matched to hull weight
- Experienced tow drivers with checked records and route planning
- Pre-trip inspection of trailer brakes, tires and straps
Crime and theft
ModerateOutboard engines, electronics and stainless hardware are stolen from yards and from boats awaiting delivery.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Engines and chartplotters fitted to boats stored outside
- Fenced yard with cameras; electronics fitted just before shipment
Inland marine and equipment
HighFinished boats are high-value, easily marked goods that spend time on trailers, at shows, afloat on trials and at dealers.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Boats left afloat at the plant dock or a marina
- Stock at dealers on consignment or floor plan terms
- Storm season with hulls stored outdoors on stands
- Transit, show and afloat cover with limits per boat
- Named-storm plan for hauling out and tying down stock
Environmental
ElevatedStyrene emissions, acetone, waste resin and gelcoat, bottom paint and fuel are handled beside the water many plants sit on.
Pollution on or from the site or the work.
- Wash-down or test tank water draining to the waterway
- Drums of waste resin and solvent stored outside uncovered
- Solvent recycling and low-styrene resins
- Covered, contained waste storage away from the shoreline
Cyber and data
ModerateDesign files, CNC mold cutting and dealer ordering run on the network, but layup itself is manual and continues during an outage.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Connected helm systems and owner apps supported by the builder
- Dealer portals and warranty databases holding buyers' personal details
- Hull, plug and CNC files backed up offline and off site
- Multi-factor login for dealer portals, email and payment approvals
Professional liability
LowDesign faults are products claims; only custom yachts built to an owner's specification add a little advice exposure.
Loss or injury caused by advice, design, testing, care or another professional service.
- Custom or semi-custom yachts designed to the buyer's specification
- Signed build specifications that set out design responsibility
Umbrella and excess
HighA fuel explosion, carbon monoxide death or sinking with a family aboard can produce several severe injuries from one boat.
How likely one liability event is to exhaust primary limits.
- High-performance and offshore models sold in large numbers
- Wide-load towing of large hulls on public roads
- Field incident tracking tied to hull numbers and engineering review
- Rehearsed recall plan reaching dealers and registered owners
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Large steel-frame or pre-engineered metal buildings, often extended in stages, with high bays for hull work, mezzanine staging and separate mold sheds, frequently on waterfront land.
- Occupancy
- Open spraying of gelcoat and resin, acetone cleanup, peroxide catalyst, grinding dust, foam flotation and wood cores, then fuel, batteries and wiring fitted in assembly.
- Protection
- Sprinklers designed for flammable liquid spraying, ventilated layup bays, a detached catalyst store, covered metal waste containers outdoors and monitored alarms.
- Exposure
- Rows of finished hulls on stands, resin drum storage and waterfront docks sit close to the plant, and neighboring marine businesses share the same storm and fire exposure.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: boats and customers
On site: lamination and fire protection
On site: molds, yard and transit
On site: people and records
Refer or decline if you find
- Unsprinklered lamination building
- Catalyst stored beside accelerators or solvents
- Resin waste left in open bins indoors overnight
- All production molds in one fire area
- Gasoline boats delivered without fuel system pressure testing
How UrbanStat data helps.
Builders favor waterfront and coastal sites. Finished boats on stands, hulls afloat and lightweight sheds are exposed to hurricane wind and surge, and hail pits gelcoat on stock stored outdoors.
- Storm surge and hurricane scores at the address show how exposed a waterfront plant, its molds and its finished boats are before binding.
- Live event overlays during a hurricane show which boat plants and dealer yards holding insured stock lie in the track and surge zone.
- Underwriting rules and moratoriums drawn along the coast are enforced automatically on new boat-builder submissions when a storm approaches.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
2.9 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.
0.7 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Boat building (NAICS 336612). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
8 fatal work injuries in 2024, most often from contact with objects and equipment (5).
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Ship and Boat Building (NAICS 33661), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
170 citations from 44 inspections; 51% were classed serious, willful or repeat.
- 1910.134 Respiratory protection21
- 1910.1200 Hazard communication7
- 1910.95 Occupational noise exposure6
- 1910.212 General requirements for all machines5
- 1910.147 The control of hazardous energy (lockout/tagout)5
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Boat Building (NAICS 336612). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
126 facilities reported toxic chemical releases totaling 6.8 million pounds on and off site.
- Styrene6.1M
- Methyl methacrylate615,990
- Cyclohexane21,865
Chemicals released in the largest amounts, in pounds. 118 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Boat Building (NAICS 336612). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Product recall
- A fuel system or steering defect across a model year means contacting owners, hauling boats and repairing them at dealers.
- Maritime employers liability
- Staff working afloat on sea trials, at docks and on deliveries can fall under maritime injury law rather than workers' comp.
- Protection and indemnity for sea trials
- Boats run on trials and deliveries by the builder's own crew need vessel liability that general liability excludes.
- Pollution legal liability
- Resin, solvent or fuel reaching the waterway brings cleanup costs and third-party claims that general liability pollution exclusions remove.
- Equipment breakdown
- CNC mold routers, air handling for layup bays and compressors fail without fire and stop production.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.