Explosives manufacturersNAICS 325920 · SIC 2892
Explosives manufacturers make dynamite, emulsions, boosters, detonators, detonating cord, black and smokeless powder and other energetic materials for mines, quarries, construction, oil wells and ammunition makers. Many products can mass detonate, so one initiation can destroy a process building, kill its crew and damage property well beyond the boundary.
Where losses come from.
- 01
Accidental initiation during mixing, pressing or loading that destroys a process building and crew
- 02
Fire or explosion that spreads between buildings and magazines spaced too closely
- 03
Theft or diversion of detonators and explosives, and defective product that injures blasters
- PropertyProperty: Severe, 5 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Elevated, 3 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Severe, 5 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: High, 4 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Elevated, 3 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: High, 4 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: Severe, 5 of 5; sector average 3.6; all business types 3.6.
- Electronic detonators with programmable delays are replacing older types, shifting product risk toward software, firmware and setup errors.
- Bulk emulsions sensitized at the blast hole cut explosive stocks at plants but move more of the hazard onto trucks working at mines.
- Housing and warehouse development spreading toward once-remote plants shrinks buffer zones and enlarges the population a blast could reach.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
SevereEnergetic materials ignite from friction, impact, static or heat, and a mass detonation destroys buildings and damages structures far off site.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Process buildings holding more material or people than their posted limits
- Magazines closer to each other or to roads than separation tables allow
- Bulk ammonium nitrate stored near fuel oil, combustibles or wooden buildings
- Quantity-distance siting with barricades or earth mounds between buildings
- Static control, conductive floors and remote operation for sensitive steps
- Firebreaks kept clear around the whole licensed area
Business interruption
HighA blast destroys purpose-built process lines, and rebuilding waits on investigations, license reinstatement and new siting approvals.
How long and how costly a shutdown is.
- Detonator or booster output from one line with no backup
- Mine customers on supply contracts with penalty clauses
- Key products licensed for production at more than one site
- Buffer stock held at distribution magazines
Premises liability
ElevatedSites are remote and closed to the public, but a large explosion breaks windows and damages buildings well beyond the fence.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Homes, roads or businesses built close to the licensed boundary
- Hole loading or blasting services provided at customers' mines and quarries
- Blast effect zones mapped, with buffer land owned or held under easement
- Written procedures and contract terms for any field loading services
Products and completed work
HighDetonators that fire early or late, misfires left in broken rock and degraded product seriously injure blasters and mine crews.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Sales to small users with little blasting training
- Electronic detonators whose firmware or timing could fail in the field
- Product kept by customers long past its shelf life
- Lot testing for sensitivity, delay timing and stability
- Date codes, lot traceability and customer training on storage and handling
Workers’ injury
SevereAn initiation in a process building kills or maims everyone inside, and many steps still involve handling sensitive material by hand.
Injuries and illness to employees.
- Hand work with primary explosives such as detonator charging
- More people in a process building than the task needs
- Headaches and heart symptoms among staff handling nitroglycerin
- Remote or shielded operation for the most sensitive steps
- Personnel limits posted and enforced for every building
- Medical surveillance for nitrate ester exposure
Commercial auto
HighTrucks carry explosives and detonators to magazines, mines and quarries, and a crash with fire becomes a public emergency.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Detonators carried with explosives without approved separation
- Bulk trucks driving rough mine haul roads and public highways
- Qualified hazardous materials drivers with route plans and attendance rules
- Telematics and fire suppression on every explosives vehicle
Crime and theft
ElevatedExplosives and detonators draw theft and insider diversion; the stock's money value is modest, but any loss brings regulators and liability.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Inventory records that are not reconciled daily
- Remote magazines with no intrusion alarms or patrols
- Daily reconciliation of explosives and detonators by lot
- Background checks for every employee with access to explosives
- Alarmed magazines with cameras, high-security locks and patrols
Inland marine and equipment
ElevatedBulk loading trucks, field magazines and consigned stock sit at customers' mines and quarries, and product is in transit daily.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Consignment magazines at customer sites holding the insured's stock
- Bulk trucks working on remote mine benches
- Schedule of mobile units, field magazines and stock by location
- Transit cover that names explosives and the carriers used
Environmental
HighOpen burning of waste explosives and wastewater carrying nitrates, perchlorate, TNT and RDX leave soil and groundwater contamination that lasts decades.
Pollution on or from the site or the work.
- Open burning grounds used for waste and off-spec product
- Unlined pits or ponds left from older nitroglycerin or TNT work
- Nitrate-rich runoff from ammonium nitrate storage and emulsion plants
- Waste explosives destroyed under permit, with soil monitoring
- Wastewater treated for nitrates and nitro compounds before discharge
Cyber and data
ElevatedRemote-operated lines, electronic detonator programming software and the purchaser and inventory records regulators audit all depend on the network.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Remote operation of sensitive steps through networked control systems
- Inventory and magazine records held only in one online system
- Offline backups of inventory and purchaser records
- Process control networks kept apart from office systems and remote access
Professional liability
ModerateMany makers sell blast design and vibration monitoring to mines and quarries, and a design error gets blamed for flyrock or vibration damage.
Loss or injury caused by advice, design, testing, care or another professional service.
- Blast design or vibration advice given to customers for a fee
- Written scope and limits for technical advice, with designs reviewed by a second engineer
Umbrella and excess
SevereOne explosion can kill a building's crew and damage neighbors, and a crash involving explosives can injure many people at once.
How likely one liability event is to exhaust primary limits.
- Growing population around the plant and along delivery routes
- Several buildings close enough for one blast to set off another
- Separation distances kept above the legal minimum wherever land allows
- Delivery routes planned to avoid town centers and peak traffic
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Many small, widely spaced process buildings and earth-covered or bullet-resistant magazines on large remote tracts, some with light roofs built to vent a blast upward.
- Occupancy
- Mixing, melting, pressing and loading of energetic materials sensitive to friction, impact, static and heat, plus oxidizer and fuel storage, packing and waste burning.
- Protection
- Quantity-distance separation, barricades, deluge in process buildings, lightning protection, static grounding, remote operation, fenced and patrolled perimeters and alarmed magazines.
- Exposure
- Wide buffer zones of grass or forest bring wildfire to the door, and housing or roads creeping toward the boundary enlarge the area a blast would damage.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: process buildings
On site: magazines and grounds
On site: people and vehicles
On site: quality and records
Refer or decline if you find
- Process buildings over their posted quantity or personnel limits
- Magazines or process buildings inside required separation distances
- Inventory discrepancies that are unexplained or unreported
- Any accidental initiation without a completed root-cause investigation
- Detonators and explosives carried together without approved separation
How UrbanStat data helps.
Plants and magazines sit on large remote tracts of grass or forest, where wildfire can reach explosives and an explosion can start one. Isolated magazines invite break-ins, and tornadoes can tear them open.
- Wildfire scores at the address show how much fuel and fire history surround process buildings and magazines, informing terms before any site visit.
- Crime scores at each magazine location support security conditions such as alarms, patrols and cameras for remote explosives storage.
- Street-by-street exposure views total the insured property within reach of a blast at the plant, with alerts when accumulation passes a set threshold.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
2.0 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.
0.6 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Other chemical product and preparation manufacturing (NAICS 3259), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
4 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Other Chemical Product and Preparation Manufacturing (NAICS 3259), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
21 citations from 5 inspections; 52% were classed serious, willful or repeat.
- 1910.119 Process safety management of highly hazardous chemicals10
- 1910.157 Portable fire extinguishers3
- 1910.1200 Hazard communication2
- 1910.132 General requirements (personal protective equipment)1
- 1910.219 Mechanical power-transmission apparatus1
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Explosives Manufacturing (NAICS 325920). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
30 facilities reported toxic chemical releases totaling 315,228 pounds on and off site.
- Nitrate compounds216,998
- Nitric acid30,050
- Diphenylamine23,054
Chemicals released in the largest amounts, in pounds. 7 of the facilities reported at least one chemical classed as a carcinogen.
United States, 2024. Industry: Explosives Manufacturing (NAICS 325920). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Transit and cargo
- Many cargo forms exclude or limit explosives, so product in transit needs cover that names it.
- Product recall
- A timing or firmware fault in one detonator lot forces withdrawal from magazines at every customer site.
- Contractual liability
- Mine and quarry supply contracts often require the maker to indemnify the customer for blasting incidents.
- Pollution legal liability
- Burning grounds, nitrate wastewater and legacy production leave contamination that general liability pollution exclusions do not cover.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.