Disc replication and duplication servicesNAICS 334610 · SIC 3652
Disc replicators mold optical discs from polycarbonate, metallize, lacquer and print them, and also burn short runs onto blank media, then pack and ship for film, music, software and game publishers. Clean-room lines are specialized and scarce, and the content on them belongs to someone else.
NAICS 334610 Manufacturing and Reproducing Magnetic and Optical MediaSIC 3652 Phonograph Records and Prerecorded Audio Tapes and Disks+1 more code
Where losses come from.
- 01
Smoke, water or contamination damage to clean-room replication lines
- 02
Leak or theft of customers' unreleased content and finished stock
- 03
Missed release dates and defective runs after equipment failure
- PropertyProperty: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
- Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
- Premises liabilityPremises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
- Products and completed workProducts and completed work: Moderate, 2 of 5; sector average 3.4; all business types 2.6.
- Workers’ injuryWorkers’ injury: Moderate, 2 of 5; sector average 3.4; all business types 3.0.
- Commercial autoCommercial auto: Low, 1 of 5; sector average 2.3; all business types 2.5.
- Crime and theftCrime and theft: Elevated, 3 of 5; sector average 1.9; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
- EnvironmentalEnvironmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
- Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
- Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
- Umbrella and excessUmbrella and excess: Moderate, 2 of 5; sector average 3.6; all business types 3.6.
- Streaming keeps shrinking disc volumes, so plants run older lines with fewer parts suppliers, and revenue depends on fewer customers.
- The vinyl record revival adds steam-heated presses, boilers and PVC compound to plants built for optical discs, changing the fire and injury picture.
- Content arrives as digital files rather than physical masters, so the theft risk moves from the vault to servers and transfer links.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
ElevatedMolding presses, hydraulic oil, plastics and packaging are an ordinary fire load, but clean-room equipment is ruined by light smoke or water.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Polycarbonate dryers and molding machines with oil leaks
- Printing inks, UV lacquers and cleaning solvents stored in production
- Packaging and finished stock stored high beside the production lines
- Sprinklers throughout, with clean rooms separated by rated walls
- Smoke detection tied to air handling shutdown
- Flammables cabinet and limited quantities at print stations
Business interruption
HighReplication lines, sputtering units and mastering systems come from very few makers, and customers' release dates do not move.
How long and how costly a shutdown is.
- Single site with one mastering system
- Chiller, compressed air or clean-room air handling with no redundancy
- Shrinking disc volumes leaving one or two publishers as most of revenue
- Standby arrangements with another replicator approved by content owners
- Spare stampers, molds and critical parts held
- Backup power and duplicated utilities
Premises liability
LowA closed production facility with almost no visitors.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Customer representatives attending production
- Signed-in, escorted visitors only
Products and completed work
ModerateA bad disc harms only the customer's launch; injury claims come from toys, figurines or electronics packed into special editions.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Collectors' editions packed with figurines, toys or electronic gadgets
- Software or game discs replicated from a master carrying malware
- Safety test reports and indemnities from suppliers of every packed item
- Masters scanned for malware and every run sample-tested against the master
Workers’ injury
ModerateAutomated lines keep hands away from molds; packing, printing and maintenance produce strains, minor burns and chemical contact.
Injuries and illness to employees.
- Manual packaging and kitting during release peaks
- Mold changes and maintenance on hot machines
- Lockout for mold changes and robot cells
- Job rotation and packing aids
Commercial auto
LowFinished goods ship by carrier; staff rarely drive for work.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Staff couriering masters or rush orders in their own cars
- Approved couriers used for masters and deliveries
Crime and theft
ElevatedPre-release films, games and music are targets for insiders and thieves, and finished stock is compact and easy to resell.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Masters and digital files accessible to many staff
- Overruns and rejects leaving the building intact
- Finished new releases staged at an unsecured dock
- Restricted, logged access to mastering and content servers
- Counted production with rejects shredded on site
- Background checks, cameras and searches agreed with content owners
Inland marine and equipment
ElevatedCustomers' masters, artwork, printed components and finished stock are held in care and shipped under the replicator's control.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Finished stock warehoused for publishers with no stated liability limit
- Masters with no duplicate elsewhere
- Contract terms capping liability for customers' goods and media
- Encrypted transfer and verified copies of masters
Environmental
ModerateUV lacquers, inks, solvents and plastic scrap are modest; in-house stamper making adds nickel plating baths.
Pollution on or from the site or the work.
- Nickel electroforming for stampers with rinse-water discharge
- Waste solvents and lacquer stored without containment
- Plating rinse treatment and licensed waste disposal
- Polycarbonate scrap reground or sent for recycling
Cyber and data
ElevatedUnreleased films, games and music arrive as files on mastering servers, so a breach is a leak and ransomware stops production.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Content files reachable from office email and general file shares
- Transfer links and accounts shared with many customers
- Isolated mastering network with logged, multi-factor access
- Encrypted transfer and content deleted on a set schedule after release
Professional liability
ModerateAuthoring, encoding and copy-protection work sold to publishers can corrupt content or miss specifications, leaving reprint and delay costs.
Loss or injury caused by advice, design, testing, care or another professional service.
- Authoring, encoding or copy-protection work sold as a service
- Contracts accepting the customer's launch costs for late or faulty runs
- Customer sign-off on check discs before full production
- Liability limited to the cost of rerunning the order
Umbrella and excess
ModerateFew people are exposed to injury, so a single event large enough to exhaust primary limits is unlikely.
How likely one liability event is to exhaust primary limits.
- Kitting toys, electronics or other goods together with the discs
- Supplier indemnities for any non-media items packed with discs
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Single-story steel or masonry plants with clean rooms built inside, high-bay storage for packaging and finished stock, and older buildings reused as volumes shrank.
- Occupancy
- Polycarbonate molding, metallizing, UV lacquering, disc printing and, in some plants, steam-heated vinyl presses, with cartons, film wrap and inserts stored high beside the lines.
- Protection
- Sprinklers designed for plastics and packaging storage, smoke detection that shuts down clean-room air handling, flammables cabinets, cameras and controlled access to mastering areas.
- Exposure
- Industrial parks with neighbors sharing walls or yards, and trailers of finished new releases at the dock that attract cargo thieves.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: services and customers
On site: plant and protection
On site: content security
On site: contracts and history
Refer or decline if you find
- Orders run with no check on content rights
- No access control or logging on masters and content servers
- Rejects and overruns discarded whole in ordinary trash
- Single aging line with no spares or backup facility
How UrbanStat data helps.
Clean rooms and precision molds are sensitive to water, dust and vibration, and a long power outage stops production. Stock of unreleased titles makes local burglary and cargo theft rates relevant.
- Crime scores at the address inform security conditions for a plant holding unreleased films, games and music awaiting shipment.
- Flood and earthquake scores at the property level show the exposure of clean-room lines that cannot tolerate water or misalignment.
- Permit history among more than 300 data points per property shows whether electrical, mechanical and fire protection systems were upgraded as the plant changed.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
0.6 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.
0.2 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Manufacturing and reproducing magnetic and optical media (NAICS 33461), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
9 fatal work injuries in 2024.
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Computer and Electronic Product Manufacturing (NAICS 334), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.
United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Intellectual property liability
- Running an order without valid rights brings infringement claims that general liability does not cover.
- Bailee cover for customers' goods
- Masters, printed components and finished stock held for publishers need cover that follows the contract terms.
- Equipment breakdown
- Molding machines, sputtering units and mastering systems fail without fire, and parts come from very few makers.
- Product recall
- A defective or mislabeled run already shipped to stores must be pulled back, and publishers pass the cost on under contract.
NAICS and SIC codes for disc replication and duplication services
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.