Demolition contractorsNAICS 238910 · SIC 1795

Demolition contractors take down buildings, bridges and plant, or strip interiors for renovation, using high-reach excavators, shears, breakers, torches and occasionally explosives. Structures are weakened on purpose beside occupied property, crews work among unknown materials, and debris leaves by the truckload.

NAICS 238910 Site Preparation ContractorsSIC 1795 Wrecking and Demolition Work

Construction · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Unplanned collapse or flying debris damaging neighboring buildings, utilities and passers-by

  2. 02

    Workers killed or badly hurt by falls, collapses and machines

  3. 03

    Asbestos, lead and silica dust released on site and beyond the fence

How it comparesEach line’s rating against the average for its NAICS sector, Construction (49 business types), and for all 747.
  1. PropertyProperty: Moderate, 2 of 5; sector average 2.2; all business types 2.9.
  2. Business interruptionBusiness interruption: Moderate, 2 of 5; sector average 1.8; all business types 2.7.
  3. Premises liabilityPremises liability: Severe, 5 of 5; sector average 3.5; all business types 2.7.
  4. Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 3.8; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: Severe, 5 of 5; sector average 3.8; all business types 3.0.
  6. Commercial autoCommercial auto: High, 4 of 5; sector average 3.1; all business types 2.5.
  7. Crime and theftCrime and theft: Moderate, 2 of 5; sector average 1.7; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: High, 4 of 5; sector average 3.2; all business types 2.6.
  9. EnvironmentalEnvironmental: High, 4 of 5; sector average 2.5; all business types 2.3.
  10. Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.0; all business types 2.7.
  11. Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 2.3; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: Severe, 5 of 5; sector average 4.0; all business types 3.6.
What’s changing
  • Recycling and salvage targets turn demolition into deconstruction, keeping crews inside structures longer and filling yards with combustible timber and metal stock.
  • Remote-controlled demolition machines and drones keep workers out of unstable structures, cutting injury exposure while raising equipment values.
  • More urban infill and partial demolition beside occupied buildings, together with larger jury awards, raise the severity of collapse and neighbor damage claims.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Moderate
The yard and shop hold machines under repair, fuel, cutting gases and piles of salvaged timber and metal.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Salvaged timber, doors and fixtures stockpiled against the shop
  • Torch cutting of scrap in the yard near fuel storage
Controls that matter
  • Salvage piles kept small and separated from buildings
  • Cylinders secured and fuel tanks in containment away from cutting areas

Business interruption

Moderate
Work stops if key machines are lost, but specialized excavators can be rented and jobs resequenced.

How long and how costly a shutdown is.

Watch for
  • One high-reach machine carrying most of the contract backlog
  • Contracts with heavy delay penalties
Controls that matter
  • Rental agreements in place for substitute machines and attachments

Premises liability

Severe
Deliberately weakening structures next to streets and occupied buildings can injure the public and wreck adjoining property in seconds.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Party walls or buildings sharing structure with the one coming down
  • Explosive demolition or work beside live rail, roads or utilities
  • Partial demolition with occupants still in the rest of the building
Controls that matter
  • Engineer's demolition plan with sequence, exclusion zones and temporary support
  • Pre-condition surveys and vibration monitoring of neighboring properties
  • Utilities disconnected and capped in writing before work starts

Products and completed work

Elevated
Selective demolition leaves a structure others rely on, and backfilled basements or buried debris cause settlement later.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Load-bearing elements removed during interior strip-outs
  • Basements filled with rubble and handed over as building pads
Controls that matter
  • Structural review before any cutting in buildings that remain
  • Compaction testing and sign-off of backfilled areas

Workers’ injury

Severe
Falls through floors, premature collapse, struck-by injuries and toxic dust make this one of the deadliest trades.

Injuries and illness to employees.

Watch for
  • Hand demolition on upper floors with openings unguarded
  • Workers on foot inside the swing radius of excavators
  • Torch cutting of painted or coated steel without air monitoring
Controls that matter
  • Daily competent-person inspection as the structure changes
  • Machine demolition preferred, with spotters and enforced exclusion zones
  • Respiratory protection, blood-lead testing and wet methods for dust

Commercial auto

High
Dump trucks and roll-off haulers run loaded debris through city streets all day; lowboys move heavy machines.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Overloaded or untarped debris loads
  • Owner-operator haulers hired without insurance checks
Controls that matter
  • Weigh tickets, tarping rules and wheel washing at site exits
  • Driver qualification files and certificates from every hired hauler

Crime and theft

Moderate
Copper, steel and architectural salvage have ready resale value and attract site theft and off-book sales by employees.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Salvage sold for cash by site supervisors
  • Unfenced sites holding stripped copper overnight
Controls that matter
  • Scrap sold only through weighed, invoiced loads to named buyers
  • Fenced sites with locked containers for nonferrous metals

Inland marine and equipment

High
High-reach excavators, shears, breakers and loaders work on rubble and inside failing structures, where they overturn or are buried.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Machines working on suspended slabs of unknown capacity
  • Rented high-reach units taken on full contractual responsibility
  • Hydraulic line fires started by hot debris
Controls that matter
  • Floor load checks before any machine goes on a slab
  • On-board fire suppression and daily hose inspections
  • Scheduled values kept current, including rented and leased units

Environmental

High
Old buildings hold asbestos, lead paint, mercury switches, contaminated transformer oil and forgotten tanks, all disturbed by the work.

Pollution on or from the site or the work.

Watch for
  • No hazardous materials survey before the job is priced
  • Dust and runoff leaving the site toward neighbors and drains
  • Debris sent to unlicensed fill sites
Controls that matter
  • Independent survey and abatement completed before structural demolition
  • Water suppression, air monitoring and covered loads
  • Waste manifests tying each load to a licensed facility

Cyber and data

Moderate
Bids, payroll and waste manifests run on office systems; invoice fraud with scrap buyers or haulers and ransomware are the main threats.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Scrap sale proceeds or hauler payments redirected by email
Controls that matter
  • Call-back verification before any change to payment details

Professional liability

Moderate
Demolition sequencing and temporary support usually come from an outside engineer, but in-house plans and surveys bring design error claims.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Demolition plans or hazardous materials surveys prepared by the firm's own staff
Controls that matter
  • Engineered plans sealed by an outside licensed engineer, with scope stated

Umbrella and excess

Severe
A premature collapse onto a street, a neighboring building or a busy sidewalk can produce several deaths in one event.

How likely one liability event is to exhaust primary limits.

Watch for
  • Dense urban sites beside occupied buildings and sidewalks
  • Contracts requiring very high limits or broad indemnity
Controls that matter
  • Sidewalk sheds, exclusion zones and engineered sequencing on urban jobs
  • Contract review limiting indemnity to the firm's own negligence
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
The insured's own premises are usually a metal shop, an office and a large yard for machines, containers and trucks, sometimes with a salvage storage building.
Occupancy
Machine repair and welding, torch cutting of scrap, fuel and oil storage, and stockpiles of salvaged timber, fixtures and metals awaiting sale.
Protection
Fenced, lit yards with cameras, fuel in contained tanks away from cutting areas, salvage piles kept small and separated, and extinguishers on every machine.
Exposure
Yards often sit among other industrial users and scrap dealers; on jobs, the structures sharing walls, footings or sidewalks with the building coming down set the exposure.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: work performed

On site: planning

On site: job sites

On site: equipment and people

Refer or decline if you find

  • No engineered plan for multi-story or structural demolition
  • Work started before a hazardous materials survey
  • Explosive demolition without a specialist subcontractor and separate cover
  • Shared party walls with no pre-condition survey of neighbors
  • Debris hauled by uninsured owner-operators to unknown sites
05 / Location

How UrbanStat data helps.

A half-demolished structure has lost its bracing, so a windstorm or tremor mid-job can bring walls down on neighbors. Dense urban sites raise third-party severity, exposed basements flood and strand machines, and stripped metals draw thieves.

WindEarthquakeFloodCrime
  • Wind scores at the job address flag sites where partly demolished walls and scaffolding face frequent high winds during the project.
  • Parcel and permit data give the construction date of the building coming down, an early signal for asbestos, lead paint and old tanks.
  • Underwriting rules drawn as areas on the map apply referral requirements automatically to jobs in dense urban blocks or beside rail and utility corridors.
Wind · Earthquake · Flood · Crime
06 / Public loss data · NAICS 238910

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

1.5 recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.

Site preparation contractors
1.5
All private industry
2.3

0.7 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Site preparation contractors (NAICS 23891), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

80 fatal work injuries in 2024, most often from transportation incidents (39).

Construction
9.2
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Site Preparation Contractors (NAICS 23891), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

1,620 citations from 585 inspections; 59% were classed serious, willful or repeat.

  • 1926.651 Specific excavation requirements
    148
  • 1926.652 Requirements for protective systems
    127
  • 1926.1101 Asbestos
    124
  • 1926.1153 Respirable crystalline silica
    81
  • 1926.21 Safety training and education
    35

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Site Preparation Contractors (NAICS 238910). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Contractors pollution liability
Asbestos, lead and silica dust released during demolition fall outside general liability pollution terms.
Railroad protective liability
Work beside live rail lines needs separate cover for the railroad, written to its terms.
Rented and leased equipment
High-reach excavators and attachments are often rented, with full responsibility for damage passed to the firm.
Explosion, collapse and underground
Some general liability forms restrict collapse and explosion, the core exposures of structural demolition.
Hired and non-owned auto
Owner-operator haulers and staff vehicles move debris and crews under the firm's direction.

NAICS and SIC codes for demolition contractors

SystemCodeIndustry
NAICS 2022, primary238910Site Preparation Contractors
SIC 1987, primary1795Wrecking and Demolition Work
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →