Auto body repair shopsNAICS 811121 · SIC 7532
Auto body shops straighten, weld, fill, sand and repaint vehicles damaged in collisions. Flammable paints and solvents, sanding dust, welding sparks and customers' vehicles packed into one building make fire the leading loss, with faulty structural or sensor repairs a growing liability.
NAICS 811121 Automotive Body, Paint, and Interior Repair and MaintenanceSIC 7532 Top, Body, and Upholstery Repair Shops and Paint Shops
Where losses come from.
- 01
Spray booth, mixing room and solvent fires, often lit by welding or static
- 02
Fire, theft or damage to customers' vehicles while in the shop's care
- 03
Structural, airbag or driver-assist repairs that fail in a later crash
- PropertyProperty: High, 4 of 5; sector average 2.5; all business types 2.9.
- Business interruptionBusiness interruption: Elevated, 3 of 5; sector average 1.9; all business types 2.7.
- Premises liabilityPremises liability: Moderate, 2 of 5; sector average 2.9; all business types 2.7.
- Products and completed workProducts and completed work: Elevated, 3 of 5; sector average 2.5; all business types 2.6.
- Workers’ injuryWorkers’ injury: Elevated, 3 of 5; sector average 2.5; all business types 3.0.
- Commercial autoCommercial auto: Elevated, 3 of 5; sector average 2.1; all business types 2.5.
- Crime and theftCrime and theft: Moderate, 2 of 5; sector average 2.1; all business types 2.2.
- Inland marine and equipmentInland marine and equipment: Moderate, 2 of 5; sector average 2.1; all business types 2.6.
- EnvironmentalEnvironmental: Elevated, 3 of 5; sector average 1.8; all business types 2.3.
- Cyber and dataCyber and data: Moderate, 2 of 5; sector average 2.2; all business types 2.7.
- Professional liabilityProfessional liability: Moderate, 2 of 5; sector average 2.2; all business types 2.0.
- Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.1; all business types 3.6.
- Aluminum bodies, high-strength steel and bonded joints need separate bays, specific equipment and maker procedures, and aluminum sanding dust adds a fire and explosion hazard.
- Driver-assistance sensors sit in bumpers, mirrors and windshields, so nearly every repair now needs scans and calibration documented in the job file.
- Multi-shop groups and insurer referral programs concentrate work in larger shops, while electric vehicles add battery fire risk and long waits for parts.
Twelve lines, rated.
Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.
Property
HighFlammable coatings are sprayed and mixed daily, with welding, grinding and battery work going on under the same roof.
Fire, explosion, water and weather damage to buildings, contents and stock.
- Spraying outside the booth or with booth doors open
- Welding or cutting close to fuel tanks, trim or paint stores
- Damaged electric vehicles stored indoors among other cars
- Listed spray booth with interlocked ventilation and its own suppression
- Mixing room with ventilation, grounding and flammable liquid cabinets
- Hot-work routine with a fire watch and screens
Business interruption
ElevatedThe booth and frame bench are bottlenecks, and insurer referral programs redirect work quickly if the shop is closed.
How long and how costly a shutdown is.
- Single spray booth with no backup
- Most work from one or two insurer referral agreements
- Booth burners, fans and filters on a maintenance contract
- Mutual aid arrangement with another shop for painting
Premises liability
ModerateCustomers stay in the office and estimating bay; few enter the work floor.
Injuries to customers and the public, on site or caused by operations elsewhere.
- Customers walking through the shop to view repairs
- Yard open to the public for vehicle pick-up
- Reception and estimating area separated from the work floor
- Yard surface, lighting and fencing maintained
Products and completed work
ElevatedModern repairs involve high-strength steel, airbags and driver-assist sensors; a shortcut can fail in the next crash.
Harm caused by what the business sells, serves, makes, installs or repairs.
- Structural sectioning or welding done without the vehicle maker's repair procedures
- Sensor calibration skipped or sent out with no record
- Used or non-original airbags and safety parts fitted
- Technicians trained and certified for current vehicle structures
- Pre- and post-repair diagnostic scans kept in the file
- Documented calibration for cameras and radar after every relevant repair
Workers’ injury
ElevatedIsocyanate paint vapors, sanding dust, welding fumes, noise and heavy awkward lifting produce both injuries and occupational disease.
Injuries and illness to employees.
- Painters without supplied-air respirators or fit tests
- Dry sanding with no dust extraction
- Vehicles raised on jacks without stands
- Supplied-air respirators and health checks for painters
- Vacuum-assisted sanders and prep stations with downdraft
- Lifts inspected yearly and frame equipment anchored
Commercial auto
ElevatedCustomers' vehicles are driven, test-driven, shuttled to sublet vendors and often towed by the shop itself.
Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.
- Own tow trucks or flatbeds
- Loaner or rental vehicles handed to customers
- High-value or exotic vehicles accepted for repair
- Test drives on set routes, logged by driver, vehicle and time
- Driving checks for anyone moving customer vehicles
- Keys locked in a cabinet and yard secured after hours
Crime and theft
ModerateParts, wheels, catalytic converters and whole vehicles attract thieves; insurer payments limit the cash on hand.
Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.
- Vehicles left in an unfenced lot overnight
- Staff ordering parts on the shop's accounts for resale on the side
- Fenced, lit yard with cameras and a monitored alarm
- Parts invoices matched to repair orders
Inland marine and equipment
ModerateFrame machines and booths are fixed; diagnostic scanners, welders and employees' tools are the portable values.
Property in transit, at job sites or in the insured’s care, and mobile equipment.
- Mobile dent repair or calibration done at customers' sites
- Technicians' own tool chests left uninsured
- Schedule scan tools and calibration targets
- Agree in writing who insures employees' tools
Environmental
ElevatedWaste thinners, paint sludge, booth filters, used oil and coolant, plus solvent vapors vented to the neighborhood.
Pollution on or from the site or the work.
- Gun cleaning with open solvent pails
- Floor drains leading to the storm sewer
- Older sites with a history of solvent disposal on the ground
- Enclosed gun washers and solvent recycling
- Licensed waste hauler with manifests retained
- Waterborne basecoats and filtered booth exhaust
Cyber and data
ModerateEstimating, insurer claim platforms and parts ordering run online; ransomware or a hijacked email account stalls every open job.
Data breaches, ransomware, system outages and attacks on connected equipment.
- Shared logins to estimating and insurer platforms
- Payment instructions changed by email without a call-back
- Multifactor sign-in on estimating, email and banking
- Offline backups of job files, photographs and scan reports
Professional liability
ModerateEstimates and repair plans decide what gets fixed and what insurers pay; a missed structural or sensor item becomes a dispute.
Loss or injury caused by advice, design, testing, care or another professional service.
- Repairs planned without the vehicle maker's procedures
- Appraisal or diminished-value opinions sold to customers
- Maker repair procedures printed and kept in each job file
- Estimates reviewed against pre-repair scan results
Umbrella and excess
HighA structural, airbag or seat belt repair that fails in a later crash can leave occupants dead or paralyzed.
How likely one liability event is to exhaust primary limits.
- Structural sectioning on late-model or aluminum vehicles
- Salvage or rebuilt vehicles repaired for resale
- Certified structural technicians and documented weld procedures
- Final quality check signed before every vehicle is released
Construction, occupancy, protection, exposure.
What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.
- Construction
- Single-story masonry or steel buildings with large bays, a spray booth and mixing room inside, often in older light-industrial parks with mezzanine parts storage.
- Occupancy
- Spraying and mixing flammable coatings, welding and grinding on vehicles, and sanding dust, with customers' cars and damaged electric vehicles parked inside.
- Protection
- Listed booths with interlocked exhaust and suppression, a separated mixing room, sprinklers over the work floor, monitored alarms and a hot-work routine with fire watch.
- Exposure
- Neighbors downwind of booth exhaust, adjoining units in light-industrial rows, and outdoor lots full of customers' vehicles exposed to hail, flood and theft.
What to ask and look for.
Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.
Before quoting: ask the broker or owner
Documents to request
On site: work performed
On site: paint and hot work
On site: vehicles in care
On site: people and records
Refer or decline if you find
- Spray painting on the open shop floor
- Solvent-soaked rags and filters piled in open bins
- Damaged electric vehicles parked inside overnight
- No records of post-repair scans or calibrations
- Waste solvent with no disposal paperwork
How UrbanStat data helps.
Customers' vehicles wait outdoors for parts and paint, so hail, flood and theft hit many cars at once. Hailstorms also bring a surge of work and crowd the lot just when values peak.
- Hail and flood scores at the address show how exposed a lot full of customers' vehicles is, which guides garagekeepers limits and deductibles.
- Crime scores at the property level inform requirements for fencing, lighting and key control where vehicles and parts sit outside overnight.
- Parcel and permit data show the building's age and any spray booth or mechanical permits, a check on whether paint operations were properly installed.
What the published numbers say.
Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.
1.9 recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.
0.9 of these cases per 100 workers involved days away from work.
United States, 2024. Industry: Automotive repair and maintenance (NAICS 8111), the closest published group. Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.
11 fatal work injuries in 2024, most often from violence and other injuries by persons or animals (4).
Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.
United States, private industry, 2024. Industry: Automotive Body, Paint, and Interior Repair and Maintenance (NAICS 811121). Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.
887 citations from 175 inspections; 49% were classed serious, willful or repeat.
- 1910.134 Respiratory protection197
- 1910.1200 Hazard communication132
- 1910.107 Spray finishing using flammable and combustible materials35
- 1910.106 Flammable liquids20
- 1910.132 General requirements (personal protective equipment)20
Standards cited most often in this industry, by number of citations.
United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Automotive Body, Paint, and Interior Repair and Maintenance (NAICS 811121). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).
1,660 fires a year reported in motor vehicle sales, service and repair facilities, causing about $121 million in direct property damage a year.
United States, 2014 to 2018, annual average. Structure fires only; repair garages are not reported separately from dealerships. Source: National Fire Protection Association, Service or Gas Station Fires.
Industry loss ratios by line2020 to 2024, the same table on every guide
Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.
| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
|---|---|---|---|---|---|---|
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |
United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.
- Garagekeepers legal liability
- Vehicles waiting for parts or paint fill the lot, and one fire or hailstorm damages many at once.
- Pollution legal liability
- Waste thinners, booth sludge and solvent vapors bring cleanup and neighbor claims that general liability excludes.
- Equipment breakdown
- A failed booth burner, fan motor or compressor halts painting, the step every job passes through.
- Employment practices
- Painters and technicians are hard to hire, and flat-rate pay disputes and dismissals bring claims.
See this risk on the map.
Book a 30-minute walkthrough tailored to your portfolio and perils of interest.