Ammunition manufacturers

Ammunition manufacturers draw brass cases, form bullets and shot, make or buy primers and propellant, and load them into cartridges, shotgun shells or larger military rounds. Primary explosives and smokeless powder sit beside high-speed presses, so one ignition can destroy a building, and a defective lot is spread across many shooters.

Manufacturing · NAICS 332992 · SIC 3482 · Updated November 2026

01 / Loss drivers

Where losses come from.

  1. 01

    Explosions and flash fires in primer mixing, powder handling, loading and magazine storage

  2. 02

    Overcharged, undercharged or mixed rounds that burst guns and injure shooters and bystanders

  3. 03

    Lead contamination of workers, wastewater and soil from cores, shot, primers and test firing

How it comparesEach line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.
  1. PropertyProperty: Severe, 5 of 5; sector average 3.7; all business types 2.9.
  2. Business interruptionBusiness interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
  3. Premises liabilityPremises liability: Elevated, 3 of 5; sector average 1.9; all business types 2.7.
  4. Products and completed workProducts and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
  5. Workers’ injuryWorkers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
  6. Commercial autoCommercial auto: Elevated, 3 of 5; sector average 2.3; all business types 2.5.
  7. Crime and theftCrime and theft: Elevated, 3 of 5; sector average 1.9; all business types 2.2.
  8. Inland marine and equipmentInland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
  9. EnvironmentalEnvironmental: High, 4 of 5; sector average 2.8; all business types 2.3.
  10. Cyber and dataCyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
  11. Professional liabilityProfessional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
  12. Umbrella and excessUmbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.
What’s changing
  • Demand surges drive fast expansion with new lines, new buildings and newly hired operators, raising explosion and quality risk while experience is thin.
  • Lead-free primers and copper or steel projectiles cut lead exposure but bring new compounds and processes with less safety history.
  • Direct online sales add age verification duties and customer data, while defense buyers impose stricter data security on their contractors.
02 / Line by line

Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

Property

Severe
Primer compounds react to friction, impact and static, and propellant burns violently; one initiation can level a process building and spread.

Fire, explosion, water and weather damage to buildings, contents and stock.

Watch for
  • Primer mixing or charging done in-house, especially inside the main plant
  • Powder and primers held beyond posted limits or outside magazines
  • Process buildings with no separation, barricades or posted quantity limits
Controls that matter
  • Separated, barricaded process buildings with posted explosive and personnel limits
  • Conductive floors, grounding, humidity control and non-sparking tools in explosive areas
  • Fast-acting deluge over powder hoppers and primer lines

Business interruption

High
Loading lines and primer production are specialized and slow to replace, and an explosion brings investigations and license reviews before restart.

How long and how costly a shutdown is.

Watch for
  • One primer line or powder supplier feeding every product
  • Defense contracts with delivery penalties or sole-source status
Controls that matter
  • Product lines split across separated buildings or sites
  • Second sources qualified for propellant, primers and brass cups

Premises liability

Elevated
Few visitors come on site, but blast and fragments from an explosion, or rounds leaving an outdoor test range, can reach neighbors and roads.

Injuries to customers and the public, on site or caused by operations elsewhere.

Watch for
  • Homes, roads or schools within the plant's separation distances
  • Customer or media shooting days at the test range
  • Outdoor test ranges without baffles or a backstop sized for the calibers fired
Controls that matter
  • Separation distances to the boundary rechecked as neighbors build closer
  • Enclosed test ranges with bullet traps and restricted access

Products and completed work

High
A double charge or wrong powder bursts a gun, a squib load lodges a bullet in the bore, and faults repeat across lots.

Harm caused by what the business sells, serves, makes, installs or repairs.

Watch for
  • Remanufactured ammunition loaded into collected, once-fired cases
  • Loading lines without automatic powder charge and bullet seating checks
  • Military rounds, grenades or fuzes, where a malfunction kills crews
Controls that matter
  • Automated charge weight and presence checks that reject every faulty round
  • Lot numbers on every box, with pressure and velocity testing per lot
  • A recall plan that reaches dealers and buyers by lot number

Workers’ injury

High
Explosions burn and maim, presses crush hands, and lead and noise exposure builds up across production and test firing.

Injuries and illness to employees.

Watch for
  • Operators working beside presses without blast shields
  • Primers or powder carried by hand between machines
  • Poor ventilation and no lead monitoring in core and shot areas
Controls that matter
  • Operator shields and remote controls on presses handling primers or powder
  • Blood lead testing, hygiene rooms and no eating in production areas
  • Hearing protection and ventilated, enclosed test ranges

Commercial auto

Elevated
Propellant, primers and finished ammunition move by road as hazardous materials, and some makers run their own trucks between plants and magazines.

Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

Watch for
  • Own trucks carrying explosives without placards or trained drivers
  • Loaded trailers parked overnight outside secured areas
Controls that matter
  • Drivers trained for hazardous materials, with placards and planned routes
  • Loaded vehicles kept in secured, approved parking

Crime and theft

Elevated
Finished ammunition, primers and powder resell easily, especially during shortages, and any missing explosives must be reported and investigated.

Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

Watch for
  • Rejected rounds and scrap leaving with no count
  • Pallets of finished goods left on open docks overnight
Controls that matter
  • Finished goods and explosives inventory reconciled daily
  • Alarmed magazines, cameras and screening of staff at exits

Inland marine and equipment

Elevated
Ammunition shipments attract cargo theft, and defense contractors hold government-owned tooling, components and test equipment in their care.

Property in transit, at job sites or in the insured’s care, and mobile equipment.

Watch for
  • Government-furnished property with no agreed value or responsibility
  • Loaded trailers left at carrier terminals or staging yards
Controls that matter
  • Transit cover sized to a full truckload of ammunition
  • Register of customer-owned property with values and responsibility agreed

Environmental

High
Lead cores and shot, primer residues, explosive-laden wastewater and open burning of waste powder contaminate soil, water and air.

Pollution on or from the site or the work.

Watch for
  • Open burning or detonation of waste explosives on site
  • Shot towers, outdoor test ranges or old disposal pits
  • Explosive or lead residues in floor drains and sumps
Controls that matter
  • Waste explosives destroyed in approved incinerators or by licensed contractors
  • Wastewater from loading and primer areas treated before discharge
  • Soil and groundwater sampling on older sites, with records kept

Cyber and data

Elevated
Defense contracts carry data security terms, loading lines are networked, and direct online sales hold buyers' age and identity details.

Data breaches, ransomware, system outages and attacks on connected equipment.

Watch for
  • Controlled technical data on shared drives without access controls
  • Online sales collecting copies of buyers' identity documents
Controls that matter
  • Separate networks for production controls and defense data
  • Multi-factor login and encryption for customer records

Professional liability

Low
Little advice is sold; outside ballistic testing and published reloading data are the main professional exposures.

Loss or injury caused by advice, design, testing, care or another professional service.

Watch for
  • Pressure or ballistic testing performed for other makers
  • Reloading data published for handloaders who buy components
Controls that matter
  • Written terms and calibration records for any outside testing
  • Published load data verified by pressure testing before release

Umbrella and excess

High
An explosion that reaches neighbors, a crash carrying explosives or a defective lot that injures many shooters each threaten primary limits.

How likely one liability event is to exhaust primary limits.

Watch for
  • Neighbors or public roads inside the plant's separation distances
Controls that matter
  • Limits sized to the worst plausible explosion and product event
03 / Property picture

Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

Construction
Campuses of small, widely spaced process buildings, earth-covered magazines and barricades on rural land, beside larger noncombustible buildings for case drawing, bullet making and packing.
Occupancy
Primary explosives in primers, smokeless and black powder, high-speed loading presses, annealing furnaces, lead melting and casting, and test ranges firing live rounds.
Protection
Deluge over powder and primer operations, conductive floors and grounding, posted quantity limits, separation distances, lightning protection, monitored alarms, and a fenced, guarded perimeter with cameras.
Exposure
Grass and brush around remote buildings carry wildfire to magazines, and housing or roads that creep toward the boundary shrink the plant's safe separation distances.
04 / Checklist

What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

Before quoting: ask the broker or owner

Documents to request

On site: explosive operations

On site: storage and security

On site: quality and product

On site: people and environment

Refer or decline if you find

  • Explosives stored outside licensed magazines or over posted limits
  • An explosion or fatality with no documented investigation or changes
  • Loading lines without automatic charge checks on every round
  • Open burning of waste powder near the plant boundary
  • Homes built inside the plant's separation distances
05 / Location

How UrbanStat data helps.

Plants sit on large rural sites where grass and brush fires can reach magazines. Tornado debris can strike explosive buildings, remote stores invite break-ins, and flood water ruins propellant and spreads lead residues.

WildfireTornadoCrimeFlood
  • Wildfire and crime scores at the address show how exposed remote magazines are to brush fire and break-ins before property and theft terms are set.
  • Parcel and permit data give construction dates and permit history for buildings on the site, showing which process buildings and magazines were added recently.
  • Live wildfire perimeters during an event show whether an insured ammunition plant or its magazines lie in the fire's path.
Wildfire · Tornado · Crime · Flood
06 / Public loss data

What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

3.2 recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Small arms ammunition manufacturing
3.2
All private industry
2.3

0.9 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Small arms ammunition manufacturing (NAICS 332992). Source: U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024.

Workplace deaths

6 fatal work injuries in 2024.

Manufacturing
2.4
All workers
3.3

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Other Fabricated Metal Product Manufacturing (NAICS 3329), the closest published group. Source: U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries; sector rates.

Most cited safety standards

23 citations from 8 inspections; 78% were classed serious, willful or repeat.

  • 1910.119 Process safety management of highly hazardous chemicals
    6
  • 1910.1025 Lead
    5
  • 1910.147 The control of hazardous energy (lockout/tagout)
    4
  • 1910.178 Powered industrial trucks
    3
  • 1910.95 Occupational noise exposure
    1

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Small Arms Ammunition Manufacturing (NAICS 332992). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations); standard titles from the Code of Federal Regulations, Title 29 (section headings).

Fire frequency

7,966 fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties.

Toxic chemical releases

26 facilities reported toxic chemical releases totaling 1.2 million pounds on and off site.

  • Ethylene glycol
    256,582
  • Copper and copper compounds
    244,011
  • Nitrate compounds
    127,918

Chemicals released in the largest amounts, in pounds. 16 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Small Arms Ammunition Manufacturing (NAICS 332992). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: U.S. Environmental Protection Agency, Toxics Release Inventory basic data files.

Industry loss ratios by line2020 to 2024, the same table on every guide

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

Published lineClosest line in this guide20202021202220232024
FireProperty63.2%67.3%62.4%45.5%40.9%
Commercial multiple perilProperty and liability sold as a package61.2%60.2%59.4%61.2%54.4%
Inland marineInland marine and equipment64.5%49.4%47.1%44.1%44.0%
Other liabilityPremises liability, and most umbrella, professional (other than medical) and cyber cover65.1%58.8%61.0%63.7%71.2%
Products liabilityProducts and completed work48.2%52.2%46.0%57.5%60.3%
Workers’ compensationWorkers’ injury47.9%49.2%45.0%44.3%46.0%
Commercial auto liabilityCommercial auto68.3%66.5%71.9%76.8%77.6%
Commercial auto physical damageCommercial auto50.9%56.3%64.3%65.1%57.9%

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary.

Coverages to raise
Product recall
A charge or primer defect forces recall of whole lots already sold through dealers and online.
Cargo
Carriers limit their liability for hazardous cargo, and ammunition loads are a frequent theft target at terminals.
Contingent business interruption
Propellant and primers come from very few producers, and an outage there stops every loading line.
Equipment breakdown
Loading presses, annealers and primer machines are specialized, and a breakdown stops a lot partway through its run.
Classification
SystemCodeIndustry
NAICS 2022, primary332992Small Arms Ammunition Manufacturing
NAICS 2022332993Ammunition (except Small Arms) Manufacturing
SIC 1987, primary3482Small Arms Ammunition
SIC 19873483Ammunition, Except for Small Arms
Next step

See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

Request a Demo →