---
title: "Welding and metal cutting shops: Industry Risk Guide"
description: "Welding shops join, repair, cut and fabricate metal for industry, farms, builders and vehicle owners, from structural pieces to carports, in their own…"
url: https://www.urbanstat.com/industry-risk-guides/welding-and-metal-cutting-shops/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Welding and metal cutting shops

Welding shops join, repair, cut and fabricate metal for industry, farms, builders and vehicle owners, from structural pieces to carports, in their own workshops and from mobile rigs at customers' sites. Sparks and molten slag travel far and smolder for hours, and a failed weld on a trailer, tank or lifting device hurts people later.

Other Services (except Public Administration) · NAICS 811310 · SIC 7692 · Updated November 2026

Risk profile

1. [Property Elevated](#line-property)
2. [Business interruption Moderate](#line-bi)
3. [Premises liability High](#line-gl)
4. [Products and completed work High](#line-products)
5. [Workers’ injury Elevated](#line-wc)
6. [Commercial auto Elevated](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental Moderate](#line-env)
10. [Cyber and data Moderate](#line-cyber)
11. [Professional liability Moderate](#line-prof)
12. [Umbrella and excess High](#line-umbrella)

**Premises liability.** Mobile welders bring ignition into barns, plants, tanks and buildings under repair, and fires break out after they have gone.

Loss drivers

## Where losses come from.

1. Fires started by sparks and slag at customers' premises, often discovered after the welder leaves
2. Failure of welded or repaired items such as hitches, tanks, frames and lifting gear
3. Burns, eye injuries and fume exposure among welders

How it compares Each line’s rating against the average for its NAICS sector, Other Services (except Public Administration) (40 business types), and for all 747.

- Welding and metal cutting shops
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: Elevated, 3 of 5; sector average 2.5; all business types 2.9.
2. Business interruption Interruption Business interruption: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
3. Premises liability Premises Premises liability: High, 4 of 5; sector average 2.9; all business types 2.7.
4. Products and completed work Products Products and completed work: High, 4 of 5; sector average 2.5; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Elevated, 3 of 5; sector average 2.5; all business types 3.0.
6. Commercial auto Auto Commercial auto: Elevated, 3 of 5; sector average 2.1; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 2.1; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 2.1; all business types 2.6.
9. Environmental Environmental Environmental: Moderate, 2 of 5; sector average 1.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Moderate, 2 of 5; sector average 2.2; all business types 2.7.
11. Professional liability Professional Professional liability: Moderate, 2 of 5; sector average 2.2; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: High, 4 of 5; sector average 3.1; all business types 3.6.

What’s changing

- Fiber laser and high-definition plasma tables replace torches in many shops, cutting faster but adding costly, networked machinery with long replacement lead times.
- Tighter exposure limits for stainless and manganese fumes push shops toward extraction and powered respirators, while occupational disease claims become more common.
- Mobile welders increasingly find work through apps and online listings, often at unfamiliar sites with no hot work permit system of their own.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: Elevated (3 of 5)

The shop is usually noncombustible, but oxygen and fuel gas cylinders, paint, oily parts and constant sparks make fires and cylinder explosions credible.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Welding near stored paint, solvents or cardboard
- Cylinders unsecured, uncapped or stored with oxygen beside fuel gas
- Wood-frame or shared-tenancy buildings

**Controls that matter**

- Designated welding bays with noncombustible floors and screens
- Cylinder storage separated, chained and ventilated
- End-of-day fire check after the last hot work

### Business interruption: Moderate (2 of 5)

Welding machines are easily replaced; custom jobs in progress and a few large cutting tables are the bottlenecks.

Covers: How long and how costly a shutdown is.

**Watch for**

- Laser or plasma cutting table with long replacement lead time

**Controls that matter**

- Arrangements with nearby shops to finish urgent jobs

### Premises liability: High (4 of 5)

Mobile welders bring ignition into barns, plants, tanks and buildings under repair, and fires break out after they have gone.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Hot work on or near tanks and drums that held flammables
- Work inside grain, wood, paper or plastics facilities
- No fire watch once the job is finished

**Controls that matter**

- Written hot work permit agreed with the site owner
- Combustibles moved or covered and a fire watch kept afterward
- Gas-free certification before welding on any container

### Products and completed work: High (4 of 5)

Welds carry loads: a cracked hitch, trailer frame, pressure part or lifting lug fails in use and injures someone.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Repairs to pressure vessels, tanks, cranes or lifting attachments
- Vehicle frame, steering or suspension welding
- Fabrication to the shop's own design

**Controls that matter**

- Welders qualified to written procedures for each material
- Weld inspection or testing on load-bearing work
- Refusal or referral of coded pressure and lifting work

### Workers’ injury: Elevated (3 of 5)

Burns, arc flash to the eyes, cuts and strains are routine; fumes from stainless, galvanized and coated metal cause lasting harm.

Covers: Injuries and illness to employees.

**Watch for**

- Welding in tanks and confined spaces
- Stainless or galvanized work without local exhaust
- Heavy plate handled without cranes or hoists

**Controls that matter**

- Fume extraction at source and respirators where needed
- Helmets, gloves and flame-resistant clothing worn consistently
- Confined-space entry procedure with attendant and ventilation

### Commercial auto: Elevated (3 of 5)

Mobile rigs carry engine-driven welders and compressed gas cylinders to farms, plants and construction sites.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Cylinders carried loose or inside closed vans
- Rush call-outs to breakdowns at night

**Controls that matter**

- Cylinders upright, capped and secured in ventilated racks
- Driving records checked for mobile welders

### Crime and theft: Moderate (2 of 5)

Welders, leads, torches and nonferrous stock are attractive to thieves; cash handling is light.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Mobile rigs parked outside overnight with equipment aboard

**Controls that matter**

- Locked compound and marked, inventoried equipment

### Inland marine and equipment: Elevated (3 of 5)

Mobile welding rigs and tools work off premises, and customers' machinery, trailers and parts wait in the shop for repair.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- High-value customer equipment in the shop for extended periods
- Fabricated railings, stairs or carports awaiting installation at sites

**Controls that matter**

- Tool and equipment schedule plus cover for customers' property

### Environmental: Moderate (2 of 5)

Fumes, spent abrasives, cutting fluids, paint and metal dust are generated in small quantities.

Covers: Pollution on or from the site or the work.

**Watch for**

- Pickling acids or degreasing solvents used for finishing
- Paint spraying without a booth

**Controls that matter**

- Waste fluids and dust collected by a licensed handler

### Cyber and data: Moderate (2 of 5)

Cutting files, quotes and invoices sit on a few computers; ransomware stops laser and plasma tables that load jobs from the network.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Cutting tables connected for remote support by the machine supplier
- Invoices and payment changes handled by email only

**Controls that matter**

- Offline backups of cutting programs and job files
- Call-back check on any change to payment details

### Professional liability: Moderate (2 of 5)

Shops that design trailers, racks, platforms and brackets make engineering choices that no weld inspection can correct.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Load-bearing items built to the shop's own drawings
- Weld procedures written without a qualified reviewer

**Controls that matter**

- Engineer review and stamp for structural and lifting designs
- Drawings and load ratings kept with each job

### Umbrella and excess: High (4 of 5)

A site fire can destroy a customer's plant or barn, and a failed hitch or lifting lug can kill.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Hot work in grain, wood, plastics or fuel facilities
- Trailer, hitch, lifting or structural work sold to the public

**Controls that matter**

- Hot work permit and fire watch on every outside job
- Coded lifting and pressure work refused without certification

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Steel or masonry shop buildings with high bays and overhead cranes in larger shops; small shops often in older metal sheds or farm buildings, some wood-framed.
- **Occupancy**: Arc welding, oxy-fuel cutting, plasma and laser tables and grinding throw sparks and slag beside oxygen and fuel gas cylinders, paint, oily parts and customers' equipment.
- **Protection**: Noncombustible floors and screens at welding bays, segregated and chained cylinder storage, fume extraction, extinguishers within reach, monitored alarms and a closing fire check.
- **Exposure**: Sparks carry through open doors to yards, grass and neighboring buildings, and rural shops and job sites sit beside dry vegetation, barns, grain and timber.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What is annual revenue, and how is it split between shop fabrication, repair and field welding?
- Who designs fabricated items, and does an engineer approve structural or load-bearing work?
- What kinds of customer sites do field crews work at: farms, plants, construction, tanks or grain facilities?
- Are carports, sheds, trailers or metal buildings built for sale, and who erects them?
- Are subcontractors used, and are their insurance certificates collected?

### Documents to request

- Loss runs for the current and prior policy terms
- Written hot work permit and fire watch procedure
- Welder qualification records and weld procedure specifications
- Sample customer contracts with indemnity and insurance clauses
- Driver list with motor vehicle records

### On site: work performed

- What jobs are on the floor today, and which of them carry loads, pressure or people?
- Which processes are used: stick, wire-feed, gas-shielded, oxy-fuel, plasma, laser?
- How are trailers, hitches and lifting parts tested and marked before release?

### On site: shop

- Where are cylinders stored, and how are they secured?
- What combustibles are within reach of sparks in each welding bay?
- How are fumes extracted?
- Where is painting or finishing done, and how is overspray kept away from welding bays?

### On site: site work

- What hot work permit is used on outside jobs, and who signs it?
- How long is the fire watch after work, and who keeps it?
- What is the rule for welding on tanks, drums and containers?

### On site: people and records

- How are welders qualified, and for which procedures?
- Are inspection records kept for load-bearing welds?
- What fire and weld-failure claims has the shop had?

### Refer or decline if you find

- Site welding with no hot work permit or fire watch
- Welding on containers without cleaning and gas testing
- Repairs to pressure vessels or lifting gear without certification
- Cylinders stored loose beside welding bays
- Welding bays in a wood-frame building with no screens or sprinklers

Location

## How UrbanStat data helps.

Mobile welding in dry rural country starts grass and brush fires, so wildfire conditions at job sites matter as much as at the shop. Yards with cylinders, rigs and metal stock draw theft.

Wildfire · Crime

- Wildfire scores for the shop and for rural job addresses show where sparks from mobile welding land beside dry vegetation.
- Parcel and permit data give the shop building's construction date and permit history, a first check on combustible construction and electrical upgrades.
- Crime scores at the address inform security conditions for welding rigs, cylinders and metal stock kept in the yard.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Wildfire · Crime

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**2.4** recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Commercial and industrial machinery and equipment (except automotive and electronic) repair and maintenance

**2.4**

All private industry

**2.3**

1.0 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Commercial and industrial machinery and equipment (except automotive and electronic) repair and maintenance (NAICS 8113), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**30** fatal work injuries in 2024, most often from contact with objects and equipment (10).

Other services

**3.3**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance (NAICS 81131), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**372** citations from 125 inspections; 57% were classed serious, willful or repeat.

- 1910.134 Respiratory protection **37**
- 1910.147 The control of hazardous energy (lockout/tagout) **34**
- 1910.1200 Hazard communication **21**
- 1910.178 Powered industrial trucks **18**
- 1910.212 General requirements for all machines **17**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance (NAICS 811310). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**10** facilities reported toxic chemical releases totaling **9,986 pounds** on and off site.

- Certain glycol ethers **4,020**
- Nitrate compounds **3,716**
- Manganese **869**

Chemicals released in the largest amounts, in pounds. 2 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance (NAICS 811310). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Bailee customers' goods**: Customers' machinery, trailers and parts wait in the shop for repair and fall outside ordinary contents cover.
- **Installation floater**: Fabricated stairs, railings and carports being installed at customers' sites stay at the shop's risk until accepted.
- **Equipment breakdown**: Laser and plasma tables, compressors and large welding power sources fail electrically and halt cutting work.
- **Contractors pollution liability**: Field welding on tanks, drums and pipework can release their contents or fumes at a customer's site.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [811310](https://www.urbanstat.com/industry-risk-guides/naics/?q=811310) | Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance |
| NAICS 2022 | [332312](https://www.urbanstat.com/industry-risk-guides/naics/?q=332312) | Fabricated Structural Metal Manufacturing |
| NAICS 2022 | [238190](https://www.urbanstat.com/industry-risk-guides/naics/?q=238190) | Other Foundation, Structure, and Building Exterior Contractors |
| NAICS 2022 | [332311](https://www.urbanstat.com/industry-risk-guides/naics/?q=332311) | Prefabricated Metal Building and Component Manufacturing |
| SIC 1987, primary | [7692](https://www.urbanstat.com/industry-risk-guides/sic/?q=7692) | Welding Repair |
| SIC 1987 | [3441](https://www.urbanstat.com/industry-risk-guides/sic/?q=3441) | Fabricated Structural Metal |
| SIC 1987 | [1799](https://www.urbanstat.com/industry-risk-guides/sic/?q=1799) | Special Trade Contractors, NEC |

**Related business types**

- [Ornamental and architectural metal shops](https://www.urbanstat.com/industry-risk-guides/ornamental-and-architectural-metal-shops/)
- [Metal stamping and fabricating shops](https://www.urbanstat.com/industry-risk-guides/metal-stamping-and-fabricating-shops/)
- [Sheet metal shops and contractors](https://www.urbanstat.com/industry-risk-guides/sheet-metal-shops-and-contractors/)
- [Iron and steel erection contractors](https://www.urbanstat.com/industry-risk-guides/iron-and-steel-erection-contractors/)
- [Tank, boiler and pressure vessel fabricators](https://www.urbanstat.com/industry-risk-guides/tank-boiler-and-pressure-vessel-fabricators/)
- [Compare Welding and metal cutting shops with Ornamental and architectural metal shops](https://www.urbanstat.com/industry-risk-guides/compare/?a=welding-and-metal-cutting-shops&b=ornamental-and-architectural-metal-shops)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/welding-and-metal-cutting-shops/

- Page: Welding and metal cutting shops: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/welding-and-metal-cutting-shops/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
