---
title: "Valve, pump and fluid power manufacturers: Industry Risk Guide"
description: "These manufacturers machine, assemble and pressure test valves, pumps, hydraulic cylinders, hose fittings, faucets and pipe fittings, mostly from castings…"
url: https://www.urbanstat.com/industry-risk-guides/valve-pump-and-fluid-power-manufacturers/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Valve, pump and fluid power manufacturers

These manufacturers machine, assemble and pressure test valves, pumps, hydraulic cylinders, hose fittings, faucets and pipe fittings, mostly from castings and forgings. Their products hold back steam, fuel, gas, chemicals and water, so one leak or burst can start a fire, flood a building or injure a worker far from the plant.

Manufacturing · NAICS 332911 · SIC 3491 · Updated November 2026

Risk profile

1. [Property Elevated](#line-property)
2. [Business interruption Elevated](#line-bi)
3. [Premises liability Moderate](#line-gl)
4. [Products and completed work High](#line-products)
5. [Workers’ injury Elevated](#line-wc)
6. [Commercial auto Moderate](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment Moderate](#line-marine)
9. [Environmental Elevated](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Moderate](#line-prof)
12. [Umbrella and excess High](#line-umbrella)

**Products and completed work.** The products contain pressure, flammables and water; a failed seal, cracked body or wrong alloy causes fires, floods or injuries, often at many sites.

Loss drivers

## Where losses come from.

1. Leaks, bursts and stem blowouts in service that cause fires, explosions, floods or injection injuries
2. Failed plumbing fittings, supply lines and sump pumps that bring water damage claims from many buildings
3. Heavy casting handling, machining and pressure-test failures that injure plant staff

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Valve, pump and fluid power manufacturers
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Hydrogen, carbon capture and liquefied gas projects put valves and seals into service conditions with little field history, raising products and engineering exposure.
- Limits on lead in drinking water fittings push makers toward new alloys and plastics, changing machining hazards and long-term product performance.
- Smart actuators, connected pumps and remote monitoring turn hardware makers into software suppliers, adding cyber and firmware failure exposure.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: Elevated (3 of 5)

Machining with oils, paint and coating lines and racks of packaged stock; in-house brass casting or chrome plating adds furnaces and chemical baths.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Brass melting or a small foundry under the same roof as machining
- Elastomer seals, plastic parts and cartons stored in high racks
- Hydraulic test stands running mineral oil near welding or grinding

**Controls that matter**

- Sprinklers designed for the rack storage, with cut-off rooms for paint and plating
- Shielded test stands with pressure-drop shut-off and fire-resistant fluid

### Business interruption: Elevated (3 of 5)

Approved designs depend on particular foundries and forgers, and product approvals tie each model to the plant where it was qualified.

Covers: How long and how costly a shutdown is.

**Watch for**

- Single-source castings or forgings with long pattern and approval lead times
- One test bench or certified welding cell that every product passes through

**Controls that matter**

- A second qualified foundry, with patterns held at more than one supplier
- Safety stock of finished units and spares for repair contracts

### Premises liability: Moderate (2 of 5)

Few visitors come to the plant, but service crews repair and commission valves and pumps inside refineries, utilities and factories.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Field crews working on live lines at process plants
- Hot work or lifting at customer sites close to operating equipment

**Controls that matter**

- Written permits, isolation and lockout agreed with the customer before work
- Review of indemnity and additional insured terms in service contracts

### Products and completed work: High (4 of 5)

The products contain pressure, flammables and water; a failed seal, cracked body or wrong alloy causes fires, floods or injuries, often at many sites.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Safety relief, gas, fuel dispensing or nuclear service valves in the product line
- Plumbing fittings and supply lines sold in volume into homes and apartments
- Imported castings or seals accepted on paper certificates without verification testing

**Controls that matter**

- Shell and seat tests on every unit, with results recorded by serial number
- Material verification of castings and forgings, including positive alloy checks
- Lot traceability fine enough to narrow any recall to specific batches

### Workers’ injury: Elevated (3 of 5)

Machinists, assemblers and testers face cuts, hands crushed under heavy bodies, and stored-energy releases during pressure testing.

Covers: Injuries and illness to employees.

**Watch for**

- Heavy valve bodies and pump casings lifted and turned by hand
- Pressure testing in the open with no barrier or remote control
- Leaded brass machined or polished with no dust extraction

**Controls that matter**

- Enclosed test cells with remote pressurization and interlocked doors
- Hoists, manipulators and fixtures for heavy castings at each station
- Blood lead testing and extraction wherever leaded brass is worked

### Commercial auto: Moderate (2 of 5)

Sales engineers and field service technicians drive to customer plants; finished goods move by carrier.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Crane-equipped service trucks carrying pumps and tools to sites

**Controls that matter**

- Driving record checks and routine inspections for the service fleet

### Crime and theft: Moderate (2 of 5)

Brass, bronze and stainless castings and turnings have strong scrap value and are skimmed by staff or outsiders.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Brass chips and rejected castings leaving with no weight record
- Finished faucets and fittings staged on open docks

**Controls that matter**

- Scrap weighed out and reconciled against metal purchases
- Caged storage for nonferrous stock and finished brass goods

### Inland marine and equipment: Moderate (2 of 5)

Large valves and pumps ship to project sites and export buyers, and customers' units come in for rebuild and retesting.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Customer pumps and valves held for overhaul with no agreed value
- Large engineered units shipped by sea under unclear sale terms

**Controls that matter**

- Bailee cover sized to the largest unit in for repair
- Sale terms stating where transit risk passes to the buyer

### Environmental: Elevated (3 of 5)

Cutting oils, paint, plating baths, leaded brass chips and test fluids are used in volume, and older plants carry solvent contamination.

Covers: Pollution on or from the site or the work.

**Watch for**

- Hard chrome plating of cylinder rods with hexavalent chromium
- Past vapor degreasing with chlorinated solvents
- Test water or oil drained to floor sumps or storm drains

**Controls that matter**

- Closed-loop test fluid recovery and licensed disposal of spent oil
- Diked plating lines with fume scrubbers and wastewater treatment
- Baseline soil and groundwater testing on older sites

### Cyber and data: Elevated (3 of 5)

Smart actuators, pump controllers and dispensers connect to customers' control systems, and networked machining and order systems stop when encrypted.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Connected products shipped with default passwords or unpatched firmware
- Remote monitoring links reaching into customers' process networks

**Controls that matter**

- Firmware update and vulnerability reporting process for connected products
- Production and office networks separated, with offline backups

### Professional liability: Moderate (2 of 5)

Selection and sizing advice usually comes with the sale; designing complete pump skids or relief systems adds a real engineering exposure.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Selection advice or sizing software for corrosive, cryogenic or hydrogen service
- Engineers designing complete skids or systems rather than single units

**Controls that matter**

- Application data sheets confirmed in writing by the customer
- Second engineer review of relief valve sizing and material choices

### Umbrella and excess: High (4 of 5)

A failed relief valve, gas valve or pump seal at a refinery or occupied building can kill several people and destroy a plant.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Products sold into hydrocarbon, gas, chemical or nuclear service
- Older product lines sold with asbestos packing or gaskets

**Controls that matter**

- Limits sized to the most hazardous service the products enter

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Large single-story steel or masonry plants with crane bays, sometimes older brick buildings with additions, where a brass foundry or plating line can share the roof.
- **Occupancy**: CNC machining with coolant and oils, welding and hardfacing, paint and powder coating, pressure testing with water, oil or gas, and racks of seals and boxed fittings.
- **Protection**: Sprinklers designed for rack storage, cut-off rooms for paint and plating, shielded test cells, monitored fire and intrusion alarms, and caged storage for nonferrous stock.
- **Exposure**: Industrial districts beside rail and highways; outdoor yards of castings, pallets against walls and neighboring foundries or chemical users add fire and pollution exposure.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What share of sales goes into oil, gas, chemical, nuclear, drinking water or residential plumbing service?
- Does the company design its products or build to customer specifications, and who holds the approvals?
- Which castings and forgings are bought in, from how many foundries, and how many are imported?
- How many field service staff work at customer sites, and what work do they do there?
- Have there been recalls, asbestos suits, product claims or water damage subrogation demands in recent years?
- Is plating, casting or heat treating done in-house?

### Documents to request

- Loss runs including product claims and subrogation demands
- Product list with markets served and sales by sector
- Pressure test procedures and sample test records
- Sales and service contract terms with major customers
- Recall plan and any past recall or safety notice

### On site: products and testing

- Which product lines are being machined and assembled today, and for what service?
- How is every unit pressure tested, and where are the results recorded?
- How are incoming castings and forgings checked for material and defects?
- How are lot and serial numbers carried from raw casting to shipped product?

### On site: plant and protection

- Where are paint, plating and melting areas, and how are they separated from machining?
- How are seals, plastic parts and packaged goods stored, and does the sprinkler design match?
- What protects test stands and nearby staff from bursts and oil fires?

### On site: people and handling

- How are heavy bodies and casings lifted, turned and moved between stations?
- Where do testers stand while a unit is under pressure?
- Is leaded brass machined, and how are dust and blood lead levels monitored?

### On site: field service and records

- What permits and isolation steps do field crews follow at customer plants?
- How are customer complaints and field failures investigated and closed out?

### Refer or decline if you find

- Pressure testing with gas or air in the open, with no barrier
- Relief or gas valves shipped without recorded set-pressure or leak tests
- Imported castings accepted without material or leak verification
- Repeated water damage subrogation claims on plumbing fittings
- Hexavalent chrome plating with no fume control or wastewater treatment

Location

## How UrbanStat data helps.

Machining centers, test pits and oil sumps sit at or below grade, where flood water ruins machines and spreads oil. Wide-span roofs over crane bays face tornado and wind uplift, and shaking topples racks of heavy castings.

Flood · Tornado · Wind · Earthquake

- Flood scores at the address show whether test pits, machining centers and below-grade sumps sit in water's path before machinery and stock values are accepted.
- Parcel and permit data give the construction date and permit history, showing when foundry, plating or crane-bay additions were built onto older plants.
- Street-by-street exposure views show accumulations where a plant, its foundry and its warehouse sit close together under one peril, with alerts at a set threshold.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Tornado · Wind · Earthquake

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**1.3** recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.

Industrial valve manufacturing

**1.3**

All private industry

**2.3**

0.4 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Industrial valve manufacturing (NAICS 332911). Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**6** fatal work injuries in 2024.

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Other Fabricated Metal Product Manufacturing (NAICS 3329), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**27** citations from 9 inspections; 70% were classed serious, willful or repeat.

- 1910.1200 Hazard communication **6**
- 1910.107 Spray finishing using flammable and combustible materials **4**
- 1910.1025 Lead **3**
- 1910.157 Portable fire extinguishers **3**
- 1910.215 Abrasive wheel machinery **2**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Industrial Valve Manufacturing (NAICS 332911). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**58** facilities reported toxic chemical releases totaling **318,906 pounds** on and off site.

- Copper and copper compounds **86,557**
- Zinc compounds **78,305**
- Copper **72,070**

Chemicals released in the largest amounts, in pounds. 49 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Industrial Valve Manufacturing (NAICS 332911). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Product recall**: Field failures of valves, fittings or supply lines prompt recalls across distributors, installers and many buildings at once.
- **Contingent business interruption**: Approved designs rely on a few qualified foundries and forgers that cannot be replaced quickly.
- **Contractors pollution**: Field crews opening lines at refineries and chemical plants can cause releases that general liability pollution exclusions remove.
- **Equipment breakdown**: Large machining centers, test benches and plating rectifiers fail without fire and stop qualified production.
- **Aircraft products liability**: Hydraulic and pneumatic valves and hose assemblies built for aircraft are often excluded from general liability and need separate cover.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [332911](https://www.urbanstat.com/industry-risk-guides/naics/?q=332911) | Industrial Valve Manufacturing |
| NAICS 2022 | [332912](https://www.urbanstat.com/industry-risk-guides/naics/?q=332912) | Fluid Power Valve and Hose Fitting Manufacturing |
| NAICS 2022 | [332913](https://www.urbanstat.com/industry-risk-guides/naics/?q=332913) | Plumbing Fixture Fitting and Trim Manufacturing |
| NAICS 2022 | [332919](https://www.urbanstat.com/industry-risk-guides/naics/?q=332919) | Other Metal Valve and Pipe Fitting Manufacturing |
| NAICS 2022 | [332996](https://www.urbanstat.com/industry-risk-guides/naics/?q=332996) | Fabricated Pipe and Pipe Fitting Manufacturing |
| NAICS 2022 | [333914](https://www.urbanstat.com/industry-risk-guides/naics/?q=333914) | Measuring, Dispensing, and Other Pumping Equipment Manufacturing |
| NAICS 2022 | [333995](https://www.urbanstat.com/industry-risk-guides/naics/?q=333995) | Fluid Power Cylinder and Actuator Manufacturing |
| NAICS 2022 | [333996](https://www.urbanstat.com/industry-risk-guides/naics/?q=333996) | Fluid Power Pump and Motor Manufacturing |
| SIC 1987, primary | [3491](https://www.urbanstat.com/industry-risk-guides/sic/?q=3491) | Industrial Valves |
| SIC 1987 | [3561](https://www.urbanstat.com/industry-risk-guides/sic/?q=3561) | Pumps and Pumping Equipment |
| SIC 1987 | [3492](https://www.urbanstat.com/industry-risk-guides/sic/?q=3492) | Fluid Power Valves and Hose Fittings |
| SIC 1987 | [3494](https://www.urbanstat.com/industry-risk-guides/sic/?q=3494) | Valves and Pipe Fittings, NEC |

**Related business types**

- [Tank, boiler and pressure vessel fabricators](https://www.urbanstat.com/industry-risk-guides/tank-boiler-and-pressure-vessel-fabricators/)
- [Foundries](https://www.urbanstat.com/industry-risk-guides/foundries/)
- [Machine shops](https://www.urbanstat.com/industry-risk-guides/machine-shops/)
- [Industrial machinery manufacturers](https://www.urbanstat.com/industry-risk-guides/industrial-machinery-manufacturers/)
- [Spray equipment manufacturers](https://www.urbanstat.com/industry-risk-guides/spray-equipment-manufacturers/)
- [Compare Valve, pump and fluid power manufacturers with Tank, boiler and pressure vessel fabricators](https://www.urbanstat.com/industry-risk-guides/compare/?a=valve-pump-and-fluid-power-manufacturers&b=tank-boiler-and-pressure-vessel-fabricators)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/valve-pump-and-fluid-power-manufacturers/

- Page: Valve, pump and fluid power manufacturers: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/valve-pump-and-fluid-power-manufacturers/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
