---
title: "Truss and engineered wood manufacturers (NAICS 321215, SIC 2439): Industry Risk Guide"
description: "NAICS 321215 · SIC 2439. Truss and engineered wood plants cut lumber and press it into roof and floor trusses, or glue veneers and laminations into beams,…"
url: https://www.urbanstat.com/industry-risk-guides/truss-and-engineered-wood-manufacturers-naics-321215/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Truss and engineered wood manufacturers NAICS 321215 · SIC 2439

Truss and engineered wood plants cut lumber and press it into roof and floor trusses, or glue veneers and laminations into beams, I-joists and mass timber panels, and many deliver and crane-set the work. Sawdust, adhesives and hot presses drive fires, and every piece carries load in someone's building.

[**NAICS 321215** Engineered Wood Member Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-321215) · [**SIC 2439** Structural Wood Members, NEC](https://www.urbanstat.com/industry-risk-guides/sic/#sic-2439) · [**NAICS 321992** Prefabricated Wood Building Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-321992)

Manufacturing · Updated November 2026

Risk profile

1. [Property High](#line-property)
2. [Business interruption Elevated](#line-bi)
3. [Premises liability Elevated](#line-gl)
4. [Products and completed work High](#line-products)
5. [Workers’ injury High](#line-wc)
6. [Commercial auto High](#line-auto)
7. [Crime and theft Low](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental Moderate](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Elevated](#line-prof)
12. [Umbrella and excess High](#line-umbrella)

**Property.** Dry lumber, sawdust and adhesive stores share large open plants with hot presses or veneer dryers, and finished stock piles up outside.

Loss drivers

## Where losses come from.

1. Fires in sawdust, glue lines, dryers and presses, and in large stores of lumber and components
2. Crushing, struck-by and hand injuries at saws and presses and while moving long, heavy members
3. Roof or floor failures traced to wrong design loads, short plates, weak glue bonds or poor bracing

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Truss and engineered wood manufacturers, colored by its rating
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: High, 4 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Elevated, 3 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: High, 4 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Elevated, 3 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Mass timber panels and glued beams now go into taller and public buildings, raising product and umbrella severity and adding large glued members to the fire load.
- Automated saws, robotic assembly and design software cut hand injuries at the bench but tie output to networked machines and a few specialized suppliers.
- Rooftop solar arrays and heavier mechanical units added after construction load trusses beyond their design, and resulting failures lead back to the maker.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: High (4 of 5)

Dry lumber, sawdust and adhesive stores share large open plants with hot presses or veneer dryers, and finished stock piles up outside.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Veneer dryers and hot presses on laminated lines, prone to smoldering deposits
- Sawdust built up under component saws and in conveyor pits
- Lumber and finished trusses stacked against building walls

**Controls that matter**

- Sprinklers designed for wood storage with a dependable water supply
- Spark detection on dust ducts, with collectors outside the building
- Yard stacks kept clear of buildings, with open fire lanes between them

### Business interruption: Elevated (3 of 5)

Automated saws and presses take months to replace, and builders switch suppliers quickly when components stop arriving on schedule.

Covers: How long and how costly a shutdown is.

**Watch for**

- One automated saw or laminating press feeding all output
- Design and cutting software running from a single local server

**Controls that matter**

- Agreement with a sister or competing plant to build to the same designs
- Spare blades, press parts and machine controllers held on site

### Premises liability: Elevated (3 of 5)

Delivery crews unload and lift components with boom trucks and cranes on busy job sites, close to other trades and passersby.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Crane setting of trusses on site by the insured's own crews
- Will-call pickup or retail lumber sales in the yard

**Controls that matter**

- Qualified operators, lift plans and exclusion zones for every set
- Customers' drivers kept out of the loading lanes

### Products and completed work: High (4 of 5)

Trusses and beams hold up roofs and floors for decades; one design or fabrication error causes collapse, sagging or claims across a development.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Plates pressed short or missing, and lumber grades substituted
- Design loads that ignore local snow, wind or added rooftop solar
- Mass timber or glued beams for multistory and public buildings

**Controls that matter**

- Engineer-sealed designs, with each truss tagged to its drawing
- Recorded in-plant quality checks backed by independent audits
- Bracing and handling instructions shipped with every load

### Workers’ injury: High (4 of 5)

Workers cut, lift and press heavy lumber at speed beside saws, roller presses and forklifts, and setting crews work at height.

Covers: Injuries and illness to employees.

**Watch for**

- Hands near roller or gantry presses while plates are seated
- Long trusses and beams carried by hand across the floor
- Crews walking top chords during setting with no fall protection

**Controls that matter**

- Light curtains and two-hand controls on presses and saws
- Overhead hoists, stackers and conveyors for finished components
- Fall protection and a bracing plan for every truss set

### Commercial auto: High (4 of 5)

Flatbeds and pole trailers haul tall, wide component loads to job sites every day, many fitted with truck-mounted cranes.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Oversize loads moved without route planning or permits
- Boom trucks run by drivers with no crane training
- Unloading on soft or sloped ground at rural sites

**Controls that matter**

- Load securement and height checks before each truck leaves
- Driver qualification files and telematics reviewed by dispatch
- Outriggers set on mats after a ground check at the site

### Crime and theft: Low (1 of 5)

Bulky lumber and components sold on account leave little to steal beyond tools, fuel and the occasional load.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Unfenced yard with finished stock and forklifts left keyed

**Controls that matter**

- Fenced, lit yard with cameras on the gate and fuel tanks

### Inland marine and equipment: Elevated (3 of 5)

Loads in transit, components waiting at job sites and owned boom trucks and telehandlers all sit outside the plant.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Trusses left at sites for weeks before they are set
- Owned cranes and telehandlers used for setting

**Controls that matter**

- Transit cover with a clear transfer of risk on delivery
- Equipment schedule with values for cranes, forklifts and loaders

### Environmental: Moderate (2 of 5)

Adhesive resins, fuel and treated lumber offcuts are the main pollutants; laminated lines need air permits for press and dryer emissions.

Covers: Pollution on or from the site or the work.

**Watch for**

- Bulk resin or isocyanate tanks without containment
- Treated wood scrap burned on site or given away

**Controls that matter**

- Diked resin storage and licensed disposal of waste adhesive
- Treated offcuts kept apart and sent to an approved landfill

### Cyber and data: Elevated (3 of 5)

Design software feeds the automated saws and presses directly; ransomware stops cutting and locks up engineering files and orders.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Saws and design stations on the office network with vendor remote access
- Engineering files kept on one local server

**Controls that matter**

- Production machines on a separate network segment
- Offline, tested backups of designs and order files

### Professional liability: Elevated (3 of 5)

In-house technicians design each truss and layout, so a load or bracing mistake is a design failure, not only a defect.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Designs released without review by a licensed engineer
- Layouts drawn from preliminary plans that later change

**Controls that matter**

- Engineer review and seal on every design package
- Builder sign-off on layouts before cutting starts

### Umbrella and excess: High (4 of 5)

A roof collapse in an occupied building, a fatal failure during setting or a serious truck crash can exhaust primary limits.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Components for schools, arenas, warehouses and apartment buildings
- Own fleet of oversize loads on highways

**Controls that matter**

- Contracts that define design responsibility and require builder bracing
- Fleet safety program with telematics and driver coaching

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Large single-story steel or wood-frame plants with wide clear spans and open sides, often with lean-to sheds, outdoor lumber yards and covered storage for finished trusses.
- **Occupancy**: Sawing, plate pressing and gluing of dry lumber, with sawdust, adhesives and hydraulic oil; laminated lines add veneer dryers, thermal oil heaters and hot presses.
- **Protection**: Sprinklers designed for wood storage with a dependable water supply, spark detection on dust ducts, outdoor dust collectors, hot work permits and fire lanes between yard stacks.
- **Exposure**: Lumber and finished stock stacked in the open carry fire between buildings and toward neighbors; edge-of-town sites may face grass fires and long fire service response times.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What share of sales is trusses, wall panels, I-joists, laminated beams or mass timber panels?
- Who designs and seals the components, and do sales contracts accept design responsibility?
- Does the insured set components on site with its own cranes and crews, or only deliver?
- Which building types are supplied: houses, apartments, farm buildings, commercial or public buildings?
- How many trucks and trailers run, and how far do deliveries travel?
- What collapse, defect or bracing claims were made recently, and how were they resolved?

### Documents to request

- Loss runs for property, liability, auto and workers' comp
- Sample sales contract, warranty and design responsibility terms
- Independent quality audit reports and lumber grading certificates
- Driver list with motor vehicle records and a fleet schedule
- Sprinkler inspection and dust collector maintenance records

### On site: plant and fire protection

- Is the plant sprinklered throughout, and does the design cover lumber and finished truss storage?
- Where are the dust collectors, and what spark detection or explosion venting do they have?
- How are veneer dryers, presses and thermal oil heaters cleaned, inspected and protected?
- How far are lumber stacks and finished components from buildings and from each other?

### On site: production and quality

- How are saw cuts, plate placement and press settings checked against each design?
- Which lumber grades are used, and how are substitutions approved and recorded?
- Which adhesives are used, and how are spread, cure and bond strength tested?

### On site: people and machines

- What guarding protects workers at component saws, roller presses and gantry tables?
- How are long trusses and beams moved from the line to storage?

### On site: delivery and setting

- How are loads secured, measured for height and routed before leaving the yard?
- Who operates the boom trucks and cranes, and what training and certification do they hold?
- When crews set trusses, what bracing and fall protection plan do they follow?

### Refer or decline if you find

- Truss designs released without engineer review or matching job drawings
- Unsprinklered plant with lumber and finished stock stacked against walls
- Dust collectors indoors with no spark detection or explosion venting
- Presses or saws run with guards or light curtains bypassed
- Boom trucks run by untrained drivers on unchecked ground

Location

## How UrbanStat data helps.

Finished trusses stored on edge in open yards blow over and break in high wind, and open-sided sheds lose roofs. Lumber stacks catch embers near wildland, and low yards flood, soaking stock and weakening glued products.

Wind · Tornado · Wildfire · Flood

- Wind and tornado scores at the address show how exposed open yards of finished trusses and wide-span plant roofs are, before limits for outdoor stock are set.
- Parcel and permit data give construction dates and permit history for the plant, a check on press lines, dryers or storage sheds added since the last survey.
- Street-by-street exposure views total insured value across the plant, its lumber yard and neighboring wood product sites, with alerts when one area holds too much.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Wind · Tornado · Wildfire · Flood

Public loss data · NAICS 321215

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**4.2** recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Veneer, plywood, and engineered wood product manufacturing

**4.2**

All private industry

**2.3**

1.2 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Veneer, plywood, and engineered wood product manufacturing (NAICS 32121), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**3** fatal work injuries in 2024.

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Veneer, Plywood, and Engineered Wood Product Manufacturing (NAICS 32121), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**162** citations from 38 inspections; 68% were classed serious, willful or repeat.

- 1910.134 Respiratory protection **16**
- 1910.178 Powered industrial trucks **11**
- 1910.1200 Hazard communication **11**
- 1910.213 Woodworking machinery requirements **8**
- 1910.157 Portable fire extinguishers **7**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Prefabricated Wood Building Manufacturing (NAICS 321992). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**13** facilities reported toxic chemical releases totaling **76,127 pounds** on and off site.

- Methanol **54,824**
- Phenol **15,343**
- Formaldehyde **3,796**

Chemicals released in the largest amounts, in pounds. 2 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Engineered Wood Member Manufacturing (NAICS 321215). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Product recall**: A bad lot of plates, adhesive or lumber can force inspection and replacement of components across many buildings.
- **Equipment breakdown**: Automated saws, roller presses, hot presses and thermal oil heaters fail without any fire and stop the line.
- **Riggers liability**: Setting crews crane-lift trusses the builder often owns by then, and general liability excludes property in their care.
- **Motor truck cargo**: Tall truss loads are damaged by wind, rollovers and rough unloading, and builders reject cracked or twisted pieces.
- **Employment practices**: Production bonuses, shift work and high turnover on the line bring wage, discrimination and dismissal claims.

## NAICS and SIC codes for truss and engineered wood manufacturers

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [321215](https://www.urbanstat.com/industry-risk-guides/naics/#naics-321215) | Engineered Wood Member Manufacturing |
| NAICS 2022 | [321992](https://www.urbanstat.com/industry-risk-guides/naics/#naics-321992) | Prefabricated Wood Building Manufacturing |
| SIC 1987, primary | [2439](https://www.urbanstat.com/industry-risk-guides/sic/#sic-2439) | Structural Wood Members, NEC |
| SIC 1987 | [2452](https://www.urbanstat.com/industry-risk-guides/sic/#sic-2452) | Prefabricated Wood Buildings and Components |

**Related business types**

- [Sawmills and planing mills NAICS 321113](https://www.urbanstat.com/industry-risk-guides/sawmills-and-planing-mills-naics-321113/)
- [Plywood manufacturers NAICS 321212](https://www.urbanstat.com/industry-risk-guides/plywood-manufacturers-naics-321212/)
- [Manufactured home producers NAICS 321991](https://www.urbanstat.com/industry-risk-guides/manufactured-home-producers-naics-321991/)
- [Carpentry contractors NAICS 238130](https://www.urbanstat.com/industry-risk-guides/carpentry-contractors-naics-238130/)
- [Building material dealers and lumberyards NAICS 444180](https://www.urbanstat.com/industry-risk-guides/building-material-dealers-and-lumberyards-naics-444180/)
- [Compare Truss and engineered wood manufacturers with Sawmills and planing mills](https://www.urbanstat.com/industry-risk-guides/compare/?a=truss-and-engineered-wood-manufacturers-naics-321215&b=sawmills-and-planing-mills-naics-321113)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/truss-and-engineered-wood-manufacturers-naics-321215/

- Page: Truss and engineered wood manufacturers (NAICS 321215, SIC 2439): Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/truss-and-engineered-wood-manufacturers-naics-321215/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
