---
title: "Tanneries: Industry Risk Guide"
description: "Tanneries turn raw hides and skins into leather through soaking, liming, chrome or vegetable tanning, dyeing and finishing. The work uses sulfides, acids,…"
url: https://www.urbanstat.com/industry-risk-guides/tanneries/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Tanneries

Tanneries turn raw hides and skins into leather through soaking, liming, chrome or vegetable tanning, dyeing and finishing. The work uses sulfides, acids, chromium salts and solvent lacquers in large wet volumes, so pollution, toxic gas and machinery injuries dominate, with fire concentrated in the finishing department.

Manufacturing · NAICS 316110 · SIC 3111 · Updated November 2026

Risk profile

1. [Property Elevated](#line-property)
2. [Business interruption Elevated](#line-bi)
3. [Premises liability Moderate](#line-gl)
4. [Products and completed work Moderate](#line-products)
5. [Workers’ injury High](#line-wc)
6. [Commercial auto Moderate](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment Moderate](#line-marine)
9. [Environmental Severe](#line-env)
10. [Cyber and data Moderate](#line-cyber)
11. [Professional liability Low](#line-prof)
12. [Umbrella and excess Elevated](#line-umbrella)

**Environmental.** Chromium, sulfides, salt, acids and solvents leave in huge effluent and sludge volumes, and old sites carry generations of contamination.

Loss drivers

## Where losses come from.

1. Effluent, sludge and soil contamination from chromium, sulfides and solvents
2. Workers overcome by hydrogen sulfide or burned by lime, acid and hot liquors
3. Entanglement and crushing in drums, fleshing, splitting and staking machines

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Tanneries
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: Moderate, 2 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Severe, 5 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Demand for chrome-free and traceable leather is changing tanning chemistry, while buyers audit tanneries for water use, waste and restricted substances.
- Persistent fluorinated finishes and legacy chromium draw growing regulatory attention, widening the search for past contamination at long-used sites.
- Hide supply follows meat processing and demand for leather in vehicles is falling, so some tanneries consolidate and others close, leaving contaminated sites.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: Elevated (3 of 5)

Wet beamhouse and tan yard areas rarely burn, but finishing uses sprayed solvent lacquers, dryers and buffing dust in old buildings.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Solvent-based spray finishing lines and lacquer mixing rooms
- Buffing dust collectors without explosion relief
- Oil-soaked timber floors and corroded steel in aging structures

**Controls that matter**

- Finishing cut off from the rest of the plant and sprinklered
- Water-based finishes replacing solvent lacquers where quality allows
- Structural and electrical inspections that account for corrosive atmospheres

### Business interruption: Elevated (3 of 5)

Drums and finishing lines can be replaced, but a suspended discharge permit or failed effluent plant stops every wet process.

Covers: How long and how costly a shutdown is.

**Watch for**

- Effluent plant with no standby pumps or blowers
- Hides in process that rot within days if drums stop
- Automotive or footwear customers supplied on tight schedules

**Controls that matter**

- Standby power and duplicate critical effluent equipment
- Arrangements with another tannery to finish part-processed stock

### Premises liability: Moderate (2 of 5)

The public stays out, but odor, gas releases and trucks of raw hides affect neighbors and passers-by.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Housing built up around a long-established tannery
- Hide and sludge trucks leaking on public roads

**Controls that matter**

- Covered, sealed loads and a wheel-wash at the gate
- Odor abatement and a complaints procedure with records

### Products and completed work: Moderate (2 of 5)

Leather is a component; claims involve skin sensitizing residues and batches that fail automotive, footwear or upholstery specifications.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Hexavalent chromium forming in finished leather during storage
- Supply to car makers with recall and line-stoppage clauses

**Controls that matter**

- Routine testing for restricted substances before shipment
- Contract review of warranty and consequential loss terms

### Workers’ injury: High (4 of 5)

Sulfide liquors release lethal gas if acidified, and staff handle heavy wet hides around rotating drums, blades and slippery floors.

Covers: Injuries and illness to employees.

**Watch for**

- Pit, drum and sewer entry without gas testing
- Acid and sulfide streams able to mix in drains
- Unguarded in-feeds on fleshing, splitting and sammying machines

**Controls that matter**

- Fixed and personal hydrogen sulfide monitors with rescue plans
- Segregated drainage for sulfide and acid liquors
- Interlocked drum doors, machine guards and mechanical hide handling

### Commercial auto: Moderate (2 of 5)

Some tanneries run trucks to collect salted hides from packing plants; finished leather leaves by carrier.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Own trucks hauling raw hides or waste sludge

**Controls that matter**

- Driver qualification and maintenance records for hide trucks

### Crime and theft: Moderate (2 of 5)

Finished and exotic leathers have resale value, though bulk, weight and smell deter casual theft.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Exotic skins or finished sides kept in open warehousing

**Controls that matter**

- Locked finished-goods store with counts by side and grade

### Inland marine and equipment: Moderate (2 of 5)

Contract tanners hold customers' hides and pelts through weeks of processing, and exporters ship part-tanned stock in containers.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Customers' hides and furs processed with no stated values
- Wet blue shipped long distances without mold protection

**Controls that matter**

- Bailee cover with values recorded at intake
- Fungicide treatment and transit cover for exported stock

### Environmental: Severe (5 of 5)

Chromium, sulfides, salt, acids and solvents leave in huge effluent and sludge volumes, and old sites carry generations of contamination.

Covers: Pollution on or from the site or the work.

**Watch for**

- Unlined lagoons, sludge pits or historic on-site dumping
- Discharge to a river or a sewage treatment plant near its limits
- Chrome and sulfide liquors without recovery or separate treatment

**Controls that matter**

- Effluent treatment with chrome recovery, sulfide oxidation and continuous monitoring
- Sludge and trimmings sent only to licensed facilities, with manifests
- Baseline soil and groundwater assessment, plus contained chemical storage

### Cyber and data: Moderate (2 of 5)

Drum dosing, effluent plant controls and customer order systems are increasingly networked, but most processes can run manually for a time.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Effluent plant controls reachable remotely by vendors or staff
- Chemical recipes and traceability data on one unbacked server

**Controls that matter**

- Control systems segmented from office networks, with logged remote access
- Offline backups of recipes, lot records and monitoring data

### Professional liability: Low (1 of 5)

Tanneries sell leather, not advice; failures to meet a customer's specification fall under products.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Contract tanning to customers' recipes with performance guarantees

**Controls that matter**

- Written specifications and approval of trial lots before bulk runs

### Umbrella and excess: Elevated (3 of 5)

A hydrogen sulfide release can harm neighbors and passers-by, and contamination claims gather many plaintiffs around a long-used site.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Housing, schools or roads close to the beamhouse and effluent plant

**Controls that matter**

- Fence-line gas detection with an emergency plan shared with neighbors and responders

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Often old multi-building riverside sites of masonry and timber, extended over generations, with corroded steel, wet floors and finishing departments in separate or upper-floor buildings.
- **Occupancy**: Wet beamhouse and tanning drums using lime, sulfides, acids and chromium, then drying, buffing and spray finishing with solvent lacquers that bring the main fire load.
- **Protection**: Sprinklered and separated finishing departments, explosion-vented buffing dust collectors, fixed hydrogen sulfide detection, segregated drains for sulfide and acid streams, and contained chemical storage.
- **Exposure**: Neighbors downwind and downstream are exposed to odor, gas and effluent, and housing built up around older tanneries raises nuisance and release claims.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- Which hides, skins or furs are processed, and how many are processed each week?
- Which industries buy the leather, such as footwear, automotive, upholstery or fashion, and on what contract terms?
- How long has the site been used for tanning or other industry, and by whom?
- What environmental insurance, indemnities or cleanup obligations came with the site when it was acquired?
- Are any expansions, process changes or moves to new chemistry planned in the next policy term?

### Documents to request

- Loss runs for five years, including environmental claims
- Discharge and air permits with recent monitoring results
- Environmental site assessments and any remediation reports
- Waste manifests for sludge, shavings and fleshings
- Hydrogen sulfide monitoring and confined-space entry procedures

### On site: process and chemicals

- Which stages are run on site, from raw hide through tanning to finishing?
- Is tanning chrome, vegetable or synthetic, and how are spent liquors handled?
- Are finishes solvent-based or water-based, and how are they applied and dried?
- Whose hides are processed, and what terms cover damage to customers' goods?

### On site: environment

- Where do floor drains lead, and are pits, lagoons and chemical tanks lined and diked?
- How are sludge, fleshings and chrome shavings stored and disposed of?
- What is known about soil and groundwater from past operations?
- What notices of violation, fines or compliance orders are on file, and what changed?

### On site: worker safety

- How are sulfide and acid streams kept apart, and where is gas monitored?
- How is entry into drums, pits and tanks authorized and supervised?
- What guarding is fitted to fleshing, splitting and staking machines?

### On site: buildings and fire protection

- How is the finishing department separated and protected from the rest?
- What condition are structure, roof and wiring in, given the corrosive atmosphere?
- What fires, gas incidents or serious injuries have occurred at this site?

### Refer or decline if you find

- Unlined lagoons or sludge buried on site
- No hydrogen sulfide monitoring in beamhouse or effluent plant
- Discharge permit breaches or regulatory enforcement on file
- Solvent spray finishing in unsprinklered timber buildings
- No environmental site assessment for a long-occupied tannery

Location

## How UrbanStat data helps.

Tanneries draw heavy volumes of water and usually sit beside rivers. Floods that overtop pits, lagoons and chemical stores carry chromium and sulfide liquors downstream, and earthquakes can crack lagoon berms and tanks with the same result.

Flood · Earthquake

- Flood scores at the address show whether lagoons, pits and chemical stores at a riverside tannery could be overtopped, the key question for pollution terms.
- Parcel and permit data give the site's construction dates and permit history, an early indication of how long tanning has taken place on the land.
- Underwriting rules drawn as areas on the map automatically refer or block high-pollution risks located in flood plains at new business and renewal.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Earthquake

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**4.0** recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Leather and allied product manufacturing

**4.0**

All private industry

**2.3**

1.3 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Leather and allied product manufacturing (NAICS 316), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Most cited safety standards

**12** citations from 4 inspections; 58% were classed serious, willful or repeat.

- 1910.145 Specifications for accident prevention signs and tags **2**
- 1910.212 General requirements for all machines **1**
- 1904.39 Reporting fatalities, hospitalizations, amputations, and losses of an eye as a result of work-related incidents to OSHA **1**
- 1910.178 Powered industrial trucks **1**
- 1910.151 Medical services and first aid **1**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Leather and Hide Tanning and Finishing (NAICS 316110). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**11** facilities reported toxic chemical releases totaling **1.5 million pounds** on and off site.

- Chromium and chromium compounds **1.2M**
- Ammonia **161,495**
- Certain glycol ethers **53,995**

Chemicals released in the largest amounts, in pounds.

United States, 2024. Industry: Leather and Hide Tanning and Finishing (NAICS 316110). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Pollution legal liability**: Sudden releases and legacy chromium contamination fall outside general liability and are this business's largest liability exposure.
- **Equipment breakdown**: Drums, effluent blowers and boilers fail without fire, and stopped drums leave hides that rot within days.
- **Bailee customers' goods**: Contract tanners and fur dressers hold customers' hides for weeks, and their liability depends on intake records.
- **Transportation pollution**: Trucks carrying sludge, liquors and salted hides spill on public roads, where auto policies exclude most pollution.
- **Product recall**: Leather that fails automotive or footwear specifications, or carries hexavalent chromium, triggers recalls charged back to the tannery.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [316110](https://www.urbanstat.com/industry-risk-guides/naics/?q=316110) | Leather and Hide Tanning and Finishing |
| SIC 1987, primary | [3111](https://www.urbanstat.com/industry-risk-guides/sic/?q=3111) | Leather Tanning and Finishing |

**Related business types**

- [Shoe manufacturers](https://www.urbanstat.com/industry-risk-guides/shoe-manufacturers/)
- [Leather bag, luggage and accessory manufacturers](https://www.urbanstat.com/industry-risk-guides/leather-bag-luggage-and-accessory-manufacturers/)
- [Meat packing plants](https://www.urbanstat.com/industry-risk-guides/meat-packing-plants/)
- [Rendering plants](https://www.urbanstat.com/industry-risk-guides/rendering-plants/)
- [Textile finishing and coating mills](https://www.urbanstat.com/industry-risk-guides/textile-finishing-and-coating-mills/)
- [Compare Tanneries with Shoe manufacturers](https://www.urbanstat.com/industry-risk-guides/compare/?a=tanneries&b=shoe-manufacturers)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/tanneries/

- Page: Tanneries: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/tanneries/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
