---
title: "Tank, boiler and pressure vessel fabricators (NAICS 332420, SIC 3443): Industry Risk Guide"
description: "NAICS 332420 · SIC 3443. These fabricators roll, weld and test heavy plate into storage tanks, boilers, heat exchangers, gas cylinders and pressure…"
url: https://www.urbanstat.com/industry-risk-guides/tank-boiler-and-pressure-vessel-fabricators-naics-332420/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Tank, boiler and pressure vessel fabricators NAICS 332420 · SIC 3443

These fabricators roll, weld and test heavy plate into storage tanks, boilers, heat exchangers, gas cylinders and pressure vessels, mostly to customer order and often under a pressure code. A bad weld, wrong material or skipped test can release stored energy or contents with lethal force long after delivery.

[**NAICS 332420** Metal Tank (Heavy Gauge) Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332420) · [**SIC 3443** Fabricated Plate Work](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3443) · [**NAICS 332410** Power Boiler and Heat Exchanger Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332410) · [**NAICS 332313** Plate Work Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332313)

Manufacturing · Updated November 2026

Risk profile

1. [Property Elevated](#line-property)
2. [Business interruption Elevated](#line-bi)
3. [Premises liability Elevated](#line-gl)
4. [Products and completed work Severe](#line-products)
5. [Workers’ injury High](#line-wc)
6. [Commercial auto Elevated](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment High](#line-marine)
9. [Environmental Moderate](#line-env)
10. [Cyber and data Moderate](#line-cyber)
11. [Professional liability Elevated](#line-prof)
12. [Umbrella and excess Severe](#line-umbrella)

**Products and completed work.** A ruptured vessel, boiler or cylinder releases stored energy or contents violently, destroying buildings and killing people nearby.

Loss drivers

## Where losses come from.

1. Vessels, boilers or cylinders that rupture or leak in service because of weld, material or design faults
2. Crushing, falls, burns and confined-space injuries while handling, rolling and welding heavy plate
3. Damage to large, high-value vessels during lifting, oversized transport and field erection

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Tank, boiler and pressure vessel fabricators, colored by its rating
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Elevated, 3 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: Severe, 5 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Elevated, 3 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: High, 4 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Elevated, 3 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: Severe, 5 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Hydrogen, ammonia and carbon capture projects bring higher pressures, cryogenic temperatures and embrittlement concerns, raising the severity of any design or weld error.
- Retiring skilled welders and inspectors are being replaced by automated welding and phased-array ultrasonic testing, which improves consistency but leans on fewer qualified people.
- Owners are pushing longer warranties and broad indemnities into fabrication contracts, shifting more of the cost of downstream failures onto the fabricator.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: Elevated (3 of 5)

Plate and machines are noncombustible, but cutting, welding, stress-relief furnaces, coating booths and rubber lining work supply ignition and fuel.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Painting, coating or rubber lining done in the main fabrication bay
- Bulk oxygen and fuel gas manifolds near welding bays
- Gas-fired stress-relief furnaces large enough to hold whole vessels

**Controls that matter**

- Separate, sprinklered coating and lining areas with ventilation interlocks
- Hot work permits and a fire watch wherever welding happens near combustibles
- Burner management and flame safety controls on stress-relief furnaces

### Business interruption: Elevated (3 of 5)

Large plate rolls, cranes and the stress-relief furnace are bottlenecks, and code certification is tied to the shop's address.

Covers: How long and how costly a shutdown is.

**Watch for**

- Crane capacity or bay height that no nearby shop matches
- Backlog concentrated in a few large vessels with penalty clauses

**Controls that matter**

- Arrangements to rent furnace or rolling capacity from other shops
- Spare crane hoist motors, drives and roll bearings on hand

### Premises liability: Elevated (3 of 5)

Many fabricators erect tanks and set vessels at refineries, plants and farms, welding and lifting beside operating equipment.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Field welding at tank farms or plants still in operation
- Lifts over occupied areas or public roads

**Controls that matter**

- Gas testing, hot work permits and fire watch at every field job
- Written lift plans signed off for critical picks

### Products and completed work: Severe (5 of 5)

A ruptured vessel, boiler or cylinder releases stored energy or contents violently, destroying buildings and killing people nearby.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Vessels for toxic, flammable, cryogenic or high-pressure service
- Repairs or alterations to vessels in service without fresh testing
- Gas cylinders sold in large numbers to the public

**Controls that matter**

- Independent authorized inspector witnessing design review, welding and hydrotest
- Material test reports checked against plate and weld records
- Radiography or ultrasonic testing of every pressure weld

### Workers’ injury: High (4 of 5)

Workers handle heavy plate and shells, weld inside vessels, work at height on tanks and stand near pressure tests.

Covers: Injuries and illness to employees.

**Watch for**

- Welding inside vessels without gas testing or forced ventilation
- Rolling and turning shells with workers in the pinch zone
- Pneumatic rather than hydrostatic pressure testing

**Controls that matter**

- Confined space permits, atmospheric monitoring and attendants for vessel entry
- Fume extraction and respirators for stainless and coated metal
- Exclusion zones and remote gauges during pressure testing

### Commercial auto: Elevated (3 of 5)

Finished vessels travel as oversized loads, and service trucks carry welders, cylinders and crews to field jobs.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Own lowboys hauling oversized loads without permits or escorts
- Crew trucks driving long distances to remote job sites

**Controls that matter**

- Surveyed routes, permits and escorts arranged for each oversized move
- Driver qualification files and hours tracking for field crews

### Crime and theft: Moderate (2 of 5)

Welding machines and tools at job sites, and stainless or alloy offcuts in the yard, attract thieves.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Equipment left in unsecured job site containers overnight

**Controls that matter**

- Tracked, locked tool containers and fenced yards with cameras

### Inland marine and equipment: High (4 of 5)

A single finished vessel carries a large value and is exposed during lifting, transport and erection until the customer accepts it.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Oversized loads crossing bridges, rail lines and overhead cables
- Field-erected tanks left partly built through storm seasons
- Cranes and rigging owned or hired without engineered lift plans

**Controls that matter**

- Transit and installation limits set at the value of the biggest shipment
- Wind bracing for partly erected tank shells
- Crane inspections and certified riggers and signal persons

### Environmental: Moderate (2 of 5)

Paints, linings, blasting grit and hydrotest water are the main wastes; radiography sources need tight control.

Covers: Pollution on or from the site or the work.

**Watch for**

- Radiography sources stored or used without a licensed program
- Spent blast media containing old lead paint from repair work

**Controls that matter**

- Licensed radiography contractor or program with source logs
- Contained blasting and tested disposal of spent media

### Cyber and data: Moderate (2 of 5)

Design files, weld procedures and customer drawings sit on networked systems; an outage delays work but rarely stops it.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Code design records held in one system with no backup

**Controls that matter**

- Offline backups of design calculations, procedures and inspection records

### Professional liability: Elevated (3 of 5)

Fabricators often design the vessel themselves, and wrong thickness, nozzle loads or material selection builds in a hidden defect.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- In-house design under the shop's own code certification
- Thermal design of heat exchangers sold with performance guarantees

**Controls that matter**

- Design calculations checked by a second qualified engineer
- Clear split of design responsibility in every contract

### Umbrella and excess: Severe (5 of 5)

A boiler or vessel explosion in a plant, school or refinery can kill several people and cause huge property losses.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Vessels for refineries, chemical plants or occupied public buildings
- Large runs of propane or industrial gas cylinders

**Controls that matter**

- Documented traceability so claims can be tied to specific units
- Limits on contractual indemnities to owners and engineers

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: High-bay steel-frame fabrication halls with heavy crane runways, large doors, reinforced floors for vessel turning rolls, and outdoor yards for plate, finished vessels and blasting.
- **Occupancy**: Plasma and oxy-fuel cutting, submerged arc and manual welding, gas-fired stress relief, abrasive blasting, painting and rubber lining, and radiography and hydrostatic testing of finished vessels.
- **Protection**: Separate sprinklered coating and lining rooms, hot work control, monitored alarms, protected bulk gas storage, and secure radiography source storage with restricted access.
- **Exposure**: Usually in industrial parks or near ports and rail for shipping large vessels; field jobs put crews inside refineries, tank farms and process plants owned by others.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What is made: storage tanks, power boilers, heat exchangers, gas cylinders or custom pressure vessels?
- Which code certifications does the shop hold, and who acts as its authorized inspector?
- Does the firm design vessels itself or build only to customers' designs?
- What share of revenue comes from field erection, installation or repair at customers' sites?
- Which industries take the vessels, and for what service: refining, chemicals, power, gas or food?
- What vessel failures, leaks or warranty claims have been reported, and how were they resolved?

### Documents to request

- Loss runs for the current and prior policy terms
- Code certification and quality control manual
- Sample contracts showing indemnity, warranty and design responsibility
- Radiography program license or contractor agreement
- Driver list and oversized load permit records

### On site: fabrication

- Which rolls, presses and cranes set the largest vessel the shop can build?
- How are plate heats and weld procedures tracked to each finished vessel?
- Where are coating, lining and blasting done, and how are they separated from welding?

### On site: testing and inspection

- How are pressure tests set up, and where do people stand during them?
- Which welds are radiographed or ultrasonically tested, and who reviews the results?
- When was the authorized inspector last on site, and what was found?

### On site: people and safety

- How is entry into vessels for welding controlled and monitored?
- How are heavy shells turned and moved, and who plans critical lifts?
- What fume control is used for stainless, galvanized or coated work?

### On site: field and transport

- How are oversized loads routed, permitted and escorted?
- What hot work and gas testing rules apply on customers' sites?
- How are partly erected tanks braced against wind?

### Refer or decline if you find

- Pneumatic pressure testing with no exclusion zone or remote gauges
- Code certification lapsed or under review after inspection findings
- Vessel welds released without the required nondestructive testing
- Vessel entry for welding without permits or gas monitoring
- Repairs to in-service vessels done without retesting or records

Location

## How UrbanStat data helps.

Finished vessels stored in open yards and partly erected tank shells at job sites are vulnerable to wind. Shops near ports face hurricane and flood, and high-bay halls with heavy cranes suffer in tornadoes.

Wind · Hurricane · Tornado · Flood

- Wind and hurricane scores at scheduled job site addresses help price field erection, where partly built tank shells stand exposed for weeks.
- Flood scores at the address show whether the shop yard, where finished vessels wait for shipment, sits in water's path.
- Peril scores returned in seconds through the risk analysis API let every scheduled job site be checked inside the quoting workflow.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Wind · Hurricane · Tornado · Flood

Public loss data · NAICS 332420

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**3.9** recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Metal tank (heavy gauge) manufacturing

**3.9**

All private industry

**2.3**

1.3 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Metal tank (heavy gauge) manufacturing (NAICS 33242), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**46** fatal work injuries in 2024, most often from contact with objects and equipment (13).

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Fabricated Metal Product Manufacturing (NAICS 332), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**136** citations from 32 inspections; 62% were classed serious, willful or repeat.

- 1910.146 Permit-required confined spaces **29**
- 1910.134 Respiratory protection **14**
- 1910.212 General requirements for all machines **9**
- 1910.178 Powered industrial trucks **7**
- 1910.147 The control of hazardous energy (lockout/tagout) **7**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Metal Tank (Heavy Gauge) Manufacturing (NAICS 332420). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**69** facilities reported toxic chemical releases totaling **521,427 pounds** on and off site.

- Manganese compounds **113,795**
- Chromium **102,661**
- Manganese **64,767**

Chemicals released in the largest amounts, in pounds. 52 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Metal Tank (Heavy Gauge) Manufacturing (NAICS 332420). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Installation and transit floater**: Vessels and tanks remain the fabricator's risk during transit, setting and erection until the owner accepts them.
- **Contractors pollution liability**: Field work at refineries and tank farms can release product or coatings, which general liability excludes.
- **Product recall**: A material or weld defect found in a cylinder or vessel series forces costly recalls and retesting.
- **Equipment breakdown**: Plate rolls, cranes and stress-relief furnaces are costly to repair and drive the delivery schedule.

## NAICS and SIC codes for tank, boiler and pressure vessel fabricators

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [332420](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332420) | Metal Tank (Heavy Gauge) Manufacturing |
| NAICS 2022 | [332410](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332410) | Power Boiler and Heat Exchanger Manufacturing |
| NAICS 2022 | [332313](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332313) | Plate Work Manufacturing |
| SIC 1987, primary | [3443](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3443) | Fabricated Plate Work |

**Related business types**

- [Welding and metal cutting shops NAICS 811310](https://www.urbanstat.com/industry-risk-guides/welding-and-metal-cutting-shops-naics-811310/)
- [Boiler maintenance contractors NAICS 238220](https://www.urbanstat.com/industry-risk-guides/boiler-maintenance-contractors-naics-238220/)
- [Iron and steel erection contractors NAICS 238120](https://www.urbanstat.com/industry-risk-guides/iron-and-steel-erection-contractors-naics-238120/)
- [HVAC and heating equipment manufacturers NAICS 333415](https://www.urbanstat.com/industry-risk-guides/hvac-and-heating-equipment-manufacturers-naics-333415/)
- [Sheet metal shops and contractors NAICS 332322](https://www.urbanstat.com/industry-risk-guides/sheet-metal-shops-and-contractors-naics-332322/)
- [Compare Tank, boiler and pressure vessel fabricators with Welding and metal cutting shops](https://www.urbanstat.com/industry-risk-guides/compare/?a=tank-boiler-and-pressure-vessel-fabricators-naics-332420&b=welding-and-metal-cutting-shops-naics-811310)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/tank-boiler-and-pressure-vessel-fabricators-naics-332420/

- Page: Tank, boiler and pressure vessel fabricators (NAICS 332420, SIC 3443): Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/tank-boiler-and-pressure-vessel-fabricators-naics-332420/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
