---
title: "Steel mills (NAICS 331110, SIC 3312): Industry Risk Guide"
description: "NAICS 331110 · SIC 3312. Steel mills melt scrap or reduce iron ore, refine and cast the liquid steel, then roll it into plate, coil, bar and sections;…"
url: https://www.urbanstat.com/industry-risk-guides/steel-mills-naics-331110/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Steel mills NAICS 331110 · SIC 3312

Steel mills melt scrap or reduce iron ore, refine and cast the liquid steel, then roll it into plate, coil, bar and sections; re-rollers and pipe and tube mills work purchased steel. Huge volumes of molten metal, high-voltage furnaces, large hydraulic systems and overhead cranes make losses infrequent but very large.

[**NAICS 331110** Iron and Steel Mills and Ferroalloy Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331110) · [**SIC 3312** Steel Works, Blast Furnaces](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3312) · [**NAICS 331221** Rolled Steel Shape Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331221) · [**NAICS 331210** Iron and Steel Pipe and Tube Manufacturing from Purchased Steel](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331210)

Manufacturing · Updated November 2026

Risk profile

1. [Property High](#line-property)
2. [Business interruption Severe](#line-bi)
3. [Premises liability Moderate](#line-gl)
4. [Products and completed work Elevated](#line-products)
5. [Workers’ injury High](#line-wc)
6. [Commercial auto Elevated](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental High](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Low](#line-prof)
12. [Umbrella and excess High](#line-umbrella)

**Business interruption.** Melt shop, caster and hot mill run in series; losing a furnace transformer or mill drive stops everything for months.

Loss drivers

## Where losses come from.

1. Molten metal breakouts and steam explosions at furnaces, ladles and casters
2. Hydraulic oil, transformer and cable fires in rolling mills and electrical rooms
3. Fatal and disabling injuries from cranes, hot metal, gas and moving stock

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Steel mills, colored by its rating
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: High, 4 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: Severe, 5 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Elevated, 3 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: High, 4 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Electric arc furnaces fed with scrap and direct-reduced iron are replacing blast furnaces, concentrating risk in transformers, power supply and scrap screening.
- Hydrogen-based iron reduction and carbon capture projects bring new gas hazards and expensive, first-of-a-kind equipment with uncertain replacement times.
- Scrap streams contain more lithium-ion batteries, sealed cylinders and mixed alloys, raising explosion risk at charging and demanding tighter grade control.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: High (4 of 5)

Liquid steel, furnace transformers, oil-filled hydraulics and cable tunnels sit together; one breakout or oil fire damages very costly plant.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Water leaks from furnace panels or lances into the melt
- Wet or sealed scrap charged without screening
- Unprotected hydraulic cellars, cable tunnels and cold mill rolling-oil exhaust ducts

**Controls that matter**

- Leak detection on water-cooled panels with emergency furnace procedures
- Fixed fire protection for hydraulic rooms, transformers and cable tunnels
- Breakout detection on casters and containment pits kept dry

### Business interruption: Severe (5 of 5)

Melt shop, caster and hot mill run in series; losing a furnace transformer or mill drive stops everything for months.

Covers: How long and how costly a shutdown is.

**Watch for**

- Single furnace or single caster with no bypass route
- No spare furnace transformer or main mill motor
- Customers in vehicle or appliance supply chains with penalty clauses

**Controls that matter**

- Critical spares on site, tested and ready to install
- Ability to buy slab or billet and keep rolling
- Condition monitoring of transformers, gearboxes and crane hoists

### Premises liability: Moderate (2 of 5)

Sites are fenced and remote from the public, but large numbers of contractors, haulers and rail crews work inside.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Major shutdown work by outside contractors
- Slag or dust nuisance reaching neighbors

**Controls that matter**

- Contractor prequalification, induction and permit-to-work systems
- Indemnity and insurance terms in all service contracts

### Products and completed work: Elevated (3 of 5)

Steel goes into structures, pressure equipment and vehicles; off-grade heats are usually caught, but a miss spreads widely.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Plate, pipe or bar sold for pressure, rail or safety-critical uses
- Mill certificates issued by the same team that ships the product
- Radioactive sources melted from scrap

**Controls that matter**

- Heat-by-heat chemistry and mechanical testing with full traceability
- Independent sign-off of test certificates
- Radiation portals on every inbound scrap load

### Workers’ injury: High (4 of 5)

Fewer workers than in the past, but the hazards are lethal: ladle cranes, liquid metal, carbon monoxide, hot coil and rail movements.

Covers: Injuries and illness to employees.

**Watch for**

- People on foot in crane bays and scrap yards
- Maintenance inside furnaces, ducts and gas lines
- Long shifts and heat exposure in the melt shop

**Controls that matter**

- Exclusion zones and remote operation at tapping and casting
- Gas monitoring, lockout and confined space permits
- Crane inspection and certified operators for hot metal lifts

### Commercial auto: Elevated (3 of 5)

Scrap arrives and product leaves by heavy truck and rail; mills often own shuttle trucks and locomotives.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Own fleet hauling coil or long products on public roads
- Internal haul vehicles crossing public roads

**Controls that matter**

- Coil and bundle securing rules enforced at the gate
- Driver qualification and maintenance records for owned trucks

### Crime and theft: Moderate (2 of 5)

Alloying metals, copper and electrodes are valuable, and scrap buying invites weight and grade fraud.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Nickel, molybdenum and other alloys stored without stock control
- Scrap graded and paid by the same person

**Controls that matter**

- Locked alloy stores with reconciled usage
- Segregated weighing, grading and payment for scrap

### Inland marine and equipment: Elevated (3 of 5)

Slag pot carriers, loaders, locomotives and mobile cranes are large values, and product moves by rail, barge and ship.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Mobile equipment working around hot slag
- Export cargoes and stock at outside processors

**Controls that matter**

- Fire suppression on mobile plant in hot areas
- Cargo and off-site stock declared and tracked

### Environmental: High (4 of 5)

Furnace dust is a hazardous waste, and slag, mill scale, pickling acid, oils and cooling water all need managed disposal.

Covers: Pollution on or from the site or the work.

**Watch for**

- Furnace dust stored outdoors or landfilled on site
- Acid pickling lines and old lagoons
- Long industrial history on the same land

**Controls that matter**

- Baghouses with dust sent to licensed recycling
- Acid regeneration and treated, recirculated process water
- Groundwater monitoring and diked oil storage

### Cyber and data: Elevated (3 of 5)

Furnace, caster and mill automation run on networked controls; an attack mid-heat can force an unsafe stop and weeks of downtime.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Control systems reachable from office networks or vendor remote access
- Unsupported operating systems on furnace and mill controllers

**Controls that matter**

- Segmented control networks with monitored vendor access
- Offline backups of control logic and a tested safe shutdown

### Professional liability: Low (1 of 5)

Little advice is sold; grade selection and metallurgical support for customers come with the steel.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Metallurgical testing or consulting sold to outside clients

**Controls that matter**

- Sales terms disclaiming advice beyond the stated grade and specification

### Umbrella and excess: High (4 of 5)

A breakout or explosion during a contractor shutdown, a coil falling from a truck or a gas release can injure many.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Shutdowns with large contractor crews near hot metal and cranes
- Fuel gas lines and holders near the site boundary

**Controls that matter**

- Contractor permit system enforced through every outage
- Gas detection and emergency plans shared with neighbors

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Very large steel-frame melt shops and rolling mill halls with crane runways, below-grade pits and hydraulic cellars, long cable tunnels and older roofs with combustible insulation.
- **Occupancy**: Liquid steel in furnaces, ladles and casters beside water cooling, high-voltage furnace transformers, oil-filled hydraulics and lubrication systems, fuel gases, and hot coil and bar.
- **Protection**: Fixed protection in hydraulic cellars, cable tunnels and transformer bays, dry breakout pits, water leak detection on furnaces, a site fire brigade and a reliable fire water supply.
- **Exposure**: Mills sit on large industrial sites by rivers, harbors and rail, often beside processors, slag handlers and gas plants that add fire and explosion exposure.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- Is steel made from scrap in arc furnaces or from ore, or only rolled and finished?
- Which products and markets take the output, such as vehicle sheet, pipe, rail or reinforcing bar?
- Which customers or contracts carry penalty clauses, and what share of sales do they take?
- Which outside contractors run slag handling, scrap yards or shutdown maintenance, and under what indemnities?
- What breakouts, explosions, oil fires or serious injuries have occurred, and what changed afterward?

### Documents to request

- Loss runs and root-cause reports for major incidents
- Fire protection impairment logs and system test reports
- Critical spares list with lead times for long-lead equipment
- Environmental permits and furnace dust disposal records
- Sample mill test certificates and quality approvals

### On site: melt shop and casting

- How is scrap screened for moisture, sealed containers and radioactive sources?
- What detects water leaks into the furnace and breakouts at the caster?
- Are breakout and slag pits kept dry, and how are ladle linings checked?

### On site: mills and electrical

- Which hydraulic rooms, cable tunnels and transformers have fixed fire protection?
- Are fire-resistant hydraulic fluids used near hot metal?
- What do recent oil, vibration and thermal tests show for transformers and mill drives?

### On site: continuity

- Which spares are held for furnace transformers, mill motors and gearboxes, and where?
- Can any stage be bypassed, or semi-finished steel bought in to keep rolling?
- How secure and redundant is the electricity supply?

### On site: people and environment

- How are pedestrians kept out of crane, tapping and casting areas?
- How are contractors controlled during shutdowns?
- Where do furnace dust, slag and spent acid go?

### Refer or decline if you find

- No spare furnace transformer and no sourcing plan
- Hydraulic cellars and cable tunnels without fixed protection
- Scrap charged without moisture or radiation checks
- Recent breakout or steam explosion with causes unresolved

Location

## How UrbanStat data helps.

Mills sit beside rivers and harbors for water and transport, so flood and surge threaten pits, cellars and furnaces holding liquid metal. Tall crane buildings and stacks are exposed to wind and shaking.

Flood · Earthquake · Hurricane · Storm surge · Wind

- Flood and storm surge scores at the address show whether water could reach furnace pits and hydraulic cellars at waterside mills.
- Street-by-street exposure views show how much insured value sits at the mill and the processors and suppliers clustered around it, with alerts when a threshold is passed.
- Live event overlays show whether a mill lies in a hurricane's forecast track, where an orderly shutdown takes time and a forced one damages plant.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Earthquake · Hurricane · Storm surge

Public loss data · NAICS 331110

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**1.9** recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Iron and steel mills and ferroalloy manufacturing

**1.9**

All private industry

**2.3**

0.6 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Iron and steel mills and ferroalloy manufacturing (NAICS 3311), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**15** fatal work injuries in 2024, most often from contact with objects and equipment (6).

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Primary Metal Manufacturing (NAICS 331), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**109** citations from 45 inspections; 54% were classed serious, willful or repeat.

- 1910.147 The control of hazardous energy (lockout/tagout) **17**
- 1910.303 General (electrical) **12**
- 1910.305 Wiring methods, components, and equipment for general use **7**
- 1910.1200 Hazard communication **6**
- 1910.134 Respiratory protection **6**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Iron and Steel Mills and Ferroalloy Manufacturing (NAICS 331110). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**137** facilities reported toxic chemical releases totaling **117.4 million pounds** on and off site.

- Zinc compounds **37.2M**
- Manganese and manganese compounds **30.5M**
- Nitrate compounds **14.6M**

Chemicals released in the largest amounts, in pounds. 127 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Iron and Steel Mills and Ferroalloy Manufacturing (NAICS 331110). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Equipment breakdown**: Furnace transformers, mill drives and large gearboxes fail without fire, and replacements can take many months.
- **Contingent business interruption**: Mills depend on a few suppliers of scrap, ore, electrodes and power, and on large customers.
- **Site pollution liability**: Furnace dust, pickling acid, mill scale and old lagoons create pollution claims general liability excludes.
- **Product recall**: Off-grade steel built into vehicle, pipeline or pressure parts can force customers to recall and replace finished goods.
- **Utility service interruption**: A grid outage off the premises stops arc furnaces at once and can freeze metal in ladles.

## NAICS and SIC codes for steel mills

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [331110](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331110) | Iron and Steel Mills and Ferroalloy Manufacturing |
| NAICS 2022 | [331221](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331221) | Rolled Steel Shape Manufacturing |
| NAICS 2022 | [331210](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331210) | Iron and Steel Pipe and Tube Manufacturing from Purchased Steel |
| SIC 1987, primary | [3312](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3312) | Steel Works, Blast Furnaces |
| SIC 1987 | [3316](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3316) | Cold-Rolled Steel Sheet, Strip, and Bars |
| SIC 1987 | [3317](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3317) | Steel Pipe and Tubes |

**Related business types**

- [Foundries NAICS 331511](https://www.urbanstat.com/industry-risk-guides/foundries-naics-331511/)
- [Aluminum producers and mills NAICS 331313](https://www.urbanstat.com/industry-risk-guides/aluminum-producers-and-mills-naics-331313/)
- [Nonferrous metal smelters and refiners NAICS 331410](https://www.urbanstat.com/industry-risk-guides/nonferrous-metal-smelters-and-refiners-naics-331410/)
- [Scrap metal processors NAICS 423930](https://www.urbanstat.com/industry-risk-guides/scrap-metal-processors-naics-423930/)
- [Wire and cable manufacturers NAICS 331222](https://www.urbanstat.com/industry-risk-guides/wire-and-cable-manufacturers-naics-331222/)
- [Compare Steel mills with Foundries](https://www.urbanstat.com/industry-risk-guides/compare/?a=steel-mills-naics-331110&b=foundries-naics-331511)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/steel-mills-naics-331110/

- Page: Steel mills (NAICS 331110, SIC 3312): Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/steel-mills-naics-331110/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
