---
title: "Scaffolding contractors: Industry Risk Guide"
description: "Scaffolding contractors put up the temporary frames, suspended platforms and sidewalk protection that other trades work from and the public walks under,…"
url: https://www.urbanstat.com/industry-risk-guides/scaffolding-contractors/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Scaffolding contractors

Scaffolding contractors put up the temporary frames, suspended platforms and sidewalk protection that other trades work from and the public walks under, then dismantle them or hire out the components. The structure stays up for months beside occupied buildings, loaded and altered by people the erector does not supervise.

Construction · NAICS 238990 · SIC 1799 · Updated November 2026

Risk profile

1. [Property Moderate](#line-property)
2. [Business interruption Moderate](#line-bi)
3. [Premises liability Severe](#line-gl)
4. [Products and completed work High](#line-products)
5. [Workers’ injury Severe](#line-wc)
6. [Commercial auto Elevated](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental Low](#line-env)
10. [Cyber and data Moderate](#line-cyber)
11. [Professional liability Elevated](#line-prof)
12. [Umbrella and excess Severe](#line-umbrella)

**Premises liability.** A collapse or a dropped tube over a sidewalk injures many people at once, and the public walks under the work.

Loss drivers

## Where losses come from.

1. Scaffold collapse or falling components striking the public and other trades
2. Erectors falling while building or dismantling, before guardrails exist
3. Injury claims from users after the scaffold is altered or overloaded on site

How it compares Each line’s rating against the average for its NAICS sector, Construction (49 business types), and for all 747.

- Scaffolding contractors
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: Moderate, 2 of 5; sector average 2.2; all business types 2.9.
2. Business interruption Interruption Business interruption: Moderate, 2 of 5; sector average 1.8; all business types 2.7.
3. Premises liability Premises Premises liability: Severe, 5 of 5; sector average 3.5; all business types 2.7.
4. Products and completed work Products Products and completed work: High, 4 of 5; sector average 3.8; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Severe, 5 of 5; sector average 3.8; all business types 3.0.
6. Commercial auto Auto Commercial auto: Elevated, 3 of 5; sector average 3.1; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 1.7; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 3.2; all business types 2.6.
9. Environmental Environmental Environmental: Low, 1 of 5; sector average 2.5; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Moderate, 2 of 5; sector average 2.0; all business types 2.7.
11. Professional liability Professional Professional liability: Elevated, 3 of 5; sector average 2.3; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: Severe, 5 of 5; sector average 4.0; all business types 3.6.

What’s changing

- System scaffolds and aluminum components are replacing tube and fitting, speeding erection and cutting manual handling, but the parts are costlier and more attractive to thieves.
- Mast climbers, suspended platforms and powered access are taking work from fixed scaffolds on tall facades, shifting exposure toward mechanical failure and rescue planning.
- Digital tagging, drone and camera checks and sensor-monitored ties make inspection records easier to keep, which helps defend claims when users alter scaffolds.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: Moderate (2 of 5)

A yard of steel and aluminum frames with timber planks, netting and a small shop; little there burns.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Large stacks of timber planks and debris netting stored together
- Shrink-wrap sheeting and heat guns kept in the shop

**Controls that matter**

- Planks stacked in separated piles away from buildings
- Fenced yard with clear access for fire crews

### Business interruption: Moderate (2 of 5)

Components are standard and can be bought or cross-hired, though a large stock loss delays contracts.

Covers: How long and how costly a shutdown is.

**Watch for**

- Proprietary system components available from a single source

**Controls that matter**

- Cross-hire agreements with other scaffold firms

### Premises liability: Severe (5 of 5)

A collapse or a dropped tube over a sidewalk injures many people at once, and the public walks under the work.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Tall or sheeted scaffolds on street frontages in windy locations
- Suspended platforms and hoists on high-rise facades
- Ties removed by other trades with no inspection routine

**Controls that matter**

- Engineered designs for anything beyond standard configurations
- Tie patterns calculated for sheeting and netting wind loads
- Handover certificates and tagged inspections at fixed intervals

### Products and completed work: High (4 of 5)

Once handed over, the scaffold is used, loaded and altered by others, yet the erector is named in every fall claim.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Rental-only supply erected by customers of unknown skill
- No written handover stating load class and permitted use
- Long-standing scaffolds with no agreed inspection contract

**Controls that matter**

- Signed handover with load ratings posted on the scaffold
- Contract terms making users responsible for unauthorized alterations
- Photographs of the completed scaffold at handover

### Workers’ injury: Severe (5 of 5)

Erectors work at the leading edge with nothing above them and pass heavy components by hand all day.

Covers: Injuries and illness to employees.

**Watch for**

- Erectors not clipped on while advancing each lift
- Work near overhead power lines
- Labor-only gangs paid by the piece

**Controls that matter**

- Advance guardrail systems or harness and anchor for each lift
- Trade-certified erectors, with apprentices supervised
- Mechanical hoists for raising materials on tall jobs

### Commercial auto: Elevated (3 of 5)

Flatbed trucks deliver heavy, loose loads of tube and frames into congested streets.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Loads strapped loosely or stacked above the headboard
- Unloading in live traffic lanes

**Controls that matter**

- Stillages and racks with rated straps
- Delivery plans with traffic marshals at street sites

### Crime and theft: Moderate (2 of 5)

Tube, fittings and aluminum beams have scrap value and vanish from sites and yards.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Stock on long hires never reconciled
- Unfenced street-level storage at sites

**Controls that matter**

- Marked or color-coded components and stock counts by job
- Locked compounds at sites and a fenced yard

### Inland marine and equipment: Elevated (3 of 5)

Most of the firm's assets stand on other people's sites for months, exposed to storms, vehicles and theft.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Stock values on site far above the amount declared
- Hoists, mast climbers and suspended platforms on hire

**Controls that matter**

- Site-by-site inventory with values reported regularly
- Hire contracts making the customer responsible for loss on site

### Environmental: Low (1 of 5)

The work uses no chemicals of note beyond truck fuel.

Covers: Pollution on or from the site or the work.

**Watch for**

- Scaffolds built to enclose asbestos or lead paint removal

**Controls that matter**

- Components decontaminated before removal from abatement sites

### Cyber and data: Moderate (2 of 5)

Rental tracking, design software and job scheduling run on networked systems; ransomware loses track of stock on hire and inspection records.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Digital inspection tags and handover records with no offline copy

**Controls that matter**

- Offline backups of designs, hire records and inspection logs

### Professional liability: Elevated (3 of 5)

Firms design non-standard scaffolds, calculate ties and loads, and certify handovers; a design error can bring a collapse.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- In-house designers with no engineer reviewing tall or sheeted scaffolds
- Inspection services sold for scaffolds erected by others

**Controls that matter**

- Engineer-stamped designs for anything beyond standard configurations
- Written scope for third-party inspections, with limits of responsibility

### Umbrella and excess: Severe (5 of 5)

A collapse onto a crowded sidewalk or occupied building can kill and injure many people and exhaust several layers of limits.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Tall street-frontage scaffolds and sidewalk sheds in dense city centers
- Contracts demanding high limits and broad indemnity to owners

**Controls that matter**

- Limits sized to the tallest street-frontage job on the books
- Wind-rated designs and post-storm inspections on every sheeted scaffold

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: A fenced yard with steel racks for tube, frames and planks, a metal-clad shop for repairs and painting, and a small office, often in older industrial areas.
- **Occupancy**: Storage, sorting and repair of steel and aluminum components, cutting and welding of fittings, and stacks of timber planks, netting and shrink-wrap sheeting.
- **Protection**: Separated plank stacks, hot work kept away from netting and sheeting, a monitored alarm and cameras, and a lit perimeter fence with locked gates.
- **Exposure**: At job sites the scaffold stands against occupied buildings and over sidewalks and roads; at the yard, neighbors' fires and theft from open stacks are the concern.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What share of income is erect-and-dismantle, rental only, shoring, sidewalk sheds and suspended access?
- What are the tallest and largest recent jobs, and on what kinds of buildings?
- What do contracts say about alterations by others, indemnity and additional insured status?
- Are labor-only subcontract gangs used, and what share of erection hours do they work?
- What collapse, falling-object or erector fall claims has the firm had, and what changed afterwards?

### Documents to request

- Loss runs for all lines, with large liability claims described
- Standard hire and erection contracts with handover certificate
- Sample engineered design and wind calculation for a sheeted scaffold
- Erector training and certification records
- Driver list with vehicle schedule

### On site: work performed

- Are sidewalk sheds, hoists, mast climbers or debris chutes installed?
- Who designs non-standard scaffolds, and are drawings stamped by an engineer?
- How are ties, sheeting and netting designed for wind?

### On site: job sites

- Which standing scaffolds can be visited, and do their tags and ties match the design?
- How is the scaffold handed over, and what does the certificate state?
- Who inspects scaffolds in use, how often, and after storms?
- How is the public protected at street level during erection and use?
- How is ladder access locked off after hours against trespassers and burglars?

### On site: people

- What training and certification do erectors hold?
- How is fall protection provided while each lift is being built?
- How are labor-only gangs supervised on site?

### On site: yard and stock

- How is stock on each site tracked and valued?
- How are components inspected, repaired and scrapped when damaged?

### Refer or decline if you find

- No handover certificates or inspection tags
- Sheeted scaffolds with no wind calculation
- Rental-only supply to customers with no erection competence
- Erectors working without harnesses or advance guardrails
- Contracts indemnifying the general contractor for all scaffold users

Location

## How UrbanStat data helps.

Wind is the peril that brings scaffolds down, above all when they are sheeted or netted on exposed frontages. Dense city streets multiply the people and property underneath, and unattended sites lose tube and fittings to theft.

Wind · Hurricane · Tornado · Earthquake · Crime

- Wind scores at each job address identify frontages where a sheeted scaffold needs engineered ties before the contract is accepted.
- Live hurricane tracks overlaid on insured job sites show which standing scaffolds lie in the path while sheeting can still be stripped and ties added.
- Street-by-street exposure views show how much insured property stands within reach of a tall scaffold, with alerts when a set threshold is passed.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Wind · Hurricane · Tornado · Earthquake

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**1.6** recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.

All other specialty trade contractors

**1.6**

All private industry

**2.3**

0.6 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: All other specialty trade contractors (NAICS 23899), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**33** fatal work injuries in 2024, most often from transportation incidents (13).

Construction

**9.2**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: All Other Specialty Trade Contractors (NAICS 23899), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**1,052** citations from 362 inspections; 60% were classed serious, willful or repeat.

- 1910.1200 Hazard communication **56**
- 1926.501 Duty to have fall protection **51**
- 1926.451 General requirements (scaffolds) **43**
- 1910.134 Respiratory protection **30**
- 1926.1153 Respirable crystalline silica **29**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: All Other Specialty Trade Contractors (NAICS 238990). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Rental income loss**: Components destroyed on site stop earning hire income, and property cover pays that only when it is scheduled.
- **Hired and non-owned auto**: Supervisors and erectors drive their own vehicles between sites and to supplier yards.
- **Wrap-up program participation**: Work under owner or contractor wrap-ups leaves gaps for off-site work and completed operations after the project policy ends.
- **Employers liability limits**: Injured erectors sue the general contractor, which then seeks contribution from the scaffold firm under employers liability.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [238990](https://www.urbanstat.com/industry-risk-guides/naics/?q=238990) | All Other Specialty Trade Contractors |
| NAICS 2022 | [532490](https://www.urbanstat.com/industry-risk-guides/naics/?q=532490) | Other Commercial and Industrial Machinery and Equipment Rental and Leasing |
| SIC 1987, primary | [1799](https://www.urbanstat.com/industry-risk-guides/sic/?q=1799) | Special Trade Contractors, NEC |
| SIC 1987 | [7359](https://www.urbanstat.com/industry-risk-guides/sic/?q=7359) | Equipment Rental and Leasing, NEC |

**Related business types**

- [Iron and steel erection contractors](https://www.urbanstat.com/industry-risk-guides/iron-and-steel-erection-contractors/)
- [Masonry contractors](https://www.urbanstat.com/industry-risk-guides/masonry-contractors/)
- [Window cleaning contractors](https://www.urbanstat.com/industry-risk-guides/window-cleaning-contractors/)
- [Painting and wallcovering contractors](https://www.urbanstat.com/industry-risk-guides/painting-and-wallcovering-contractors/)
- [Equipment rental and leasing services](https://www.urbanstat.com/industry-risk-guides/equipment-rental-and-leasing-services/)
- [Compare Scaffolding contractors with Iron and steel erection contractors](https://www.urbanstat.com/industry-risk-guides/compare/?a=scaffolding-contractors&b=iron-and-steel-erection-contractors)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/scaffolding-contractors/

- Page: Scaffolding contractors: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/scaffolding-contractors/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
