---
title: "Plastics molders and extruders: Industry Risk Guide"
description: "Plastics processors compound or melt resin pellets and shape them by injection, blow or rotational molding, extrusion, thermoforming, laminating or foaming…"
url: https://www.urbanstat.com/industry-risk-guides/plastics-molders-and-extruders/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Plastics molders and extruders

Plastics processors compound or melt resin pellets and shape them by injection, blow or rotational molding, extrusion, thermoforming, laminating or foaming into parts, bottles, bags, film, sheet, pipe and foam. Heat, hydraulic oil and large stocks of plastic make fire the leading loss, and customers' molds tie the plant into tight supply chains.

Manufacturing · NAICS 326199 · SIC 3089 · Updated November 2026

Risk profile

1. [Property High](#line-property)
2. [Business interruption High](#line-bi)
3. [Premises liability Moderate](#line-gl)
4. [Products and completed work Elevated](#line-products)
5. [Workers’ injury Elevated](#line-wc)
6. [Commercial auto Moderate](#line-auto)
7. [Crime and theft Low](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental Moderate](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Moderate](#line-prof)
12. [Umbrella and excess Elevated](#line-umbrella)

**Property.** Molten plastic, hot hydraulic oil and electrical heaters sit beside finished goods, cartons and foam that burn fast with heavy smoke.

Loss drivers

## Where losses come from.

1. Fires at presses and extruders fed by hydraulic oil, heater bands and stored plastic
2. Crush, amputation and burn injuries at molding machines, granulators and during purging
3. Loss of customers' molds and missed deliveries to just-in-time buyers

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Plastics molders and extruders
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: High, 4 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Rules on single-use plastics and recycled content push more post-consumer resin into products, bringing contamination, variable quality and baled scrap storage.
- Electric vehicles shift molders toward battery housings and high-voltage connectors, parts where a failure can start a fire and lead to recalls.
- Automated part removal and lights-out production cut reach-in injuries but leave presses and heaters running with nobody in the building.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: High (4 of 5)

Molten plastic, hot hydraulic oil and electrical heaters sit beside finished goods, cartons and foam that burn fast with heavy smoke.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Expanded foam production using pentane or other flammable blowing agents
- Finished goods and pallets stored between machines or to the roof
- Hydraulic leaks, oil-soaked floors and aging heater wiring

**Controls that matter**

- Sprinklers designed for plastics storage, including in-rack where needed
- Fire-resistant hydraulic fluid or leak shut-offs on large presses
- Thermographic checks of heater bands, panels and drives

### Business interruption: High (4 of 5)

Molds are unique, long-lead tools, presses are sized to the job, and automotive, medical and packaging buyers hold little buffer stock.

Covers: How long and how costly a shutdown is.

**Watch for**

- Customer-owned molds with no duplicate or drawings
- Sole supplier of a component to a vehicle or appliance line
- One large press or extrusion line with no equivalent nearby

**Controls that matter**

- Mold register with values, owners and fire-protected storage
- Agreed transfer plan to sister plants or other molders
- Finished goods buffer held in a separate building

### Premises liability: Moderate (2 of 5)

Trade customers and truck drivers are the only visitors, and little work is done away from the plant.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Resin silos and loading docks close to public roads

**Controls that matter**

- Driver safety rules and marked routes in the yard

### Products and completed work: Elevated (3 of 5)

Most output is components made to customers' designs, but pipe, food packaging, medical parts and vehicle parts carry real injury and recall potential.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Pressure pipe, fittings or fuel and chemical containers
- Medical device or food-contact parts needing certified resin
- Regrind or recycled resin blended without controls

**Controls that matter**

- Resin lot traceability from silo to shipped carton
- Contracts placing design responsibility on the customer
- Process monitoring and dimensional checks on every run

### Workers’ injury: Elevated (3 of 5)

Operators reach into mold areas, clear granulators and handle molten purge, with repetitive trimming and packing on every shift.

Covers: Injuries and illness to employees.

**Watch for**

- Bypassed gate interlocks on molding machines
- Mold changes done by crane without lockout
- Temporary workers on machines after brief induction

**Controls that matter**

- Interlocks tested each shift and lockout for mold changes
- Face shields and sleeves for purging and hot runner work
- Robots or conveyors removing parts in place of hand reach-in

### Commercial auto: Moderate (2 of 5)

Most output ships by carrier; some plants run shuttle trucks to nearby customers or warehouses.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Own trucks making timed deliveries to assembly plants

**Controls that matter**

- Driver qualification files and maintenance records for shuttle trucks

### Crime and theft: Low (1 of 5)

Resin and molded parts have limited resale value, and no cash is handled.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Truckload resin purchases paid against altered bank details

**Controls that matter**

- Verification calls before changing supplier payment details

### Inland marine and equipment: Elevated (3 of 5)

Customers' molds and tooling in the plant are often worth more than the molder's own machines, and travel for repair.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Molds of others not listed, valued or insured by anyone
- Tools shipped to outside toolrooms for repair

**Controls that matter**

- Written agreement on who insures each mold, at what value
- Transit cover for molds moving to and from tool shops

### Environmental: Moderate (2 of 5)

Processing is largely clean; hydraulic oil, cooling water, pellet spills and styrene or blowing-agent emissions are the issues.

Covers: Pollution on or from the site or the work.

**Watch for**

- Pellets escaping to storm drains from silo unloading
- Polyurethane foam lines storing isocyanates in bulk

**Controls that matter**

- Drain screens and sweep-up routine at resin unloading points
- Secondary containment for hydraulic oil and foam chemicals

### Cyber and data: Elevated (3 of 5)

Presses, extrusion lines and robots run on networked controls, and automotive and packaging buyers place just-in-time orders through electronic links.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Press and robot controllers reachable from the office network
- Remote access for machine builders left permanently open

**Controls that matter**

- Separate plant networks with logged, time-limited vendor access
- Offline backups of process settings, mold data and orders

### Professional liability: Moderate (2 of 5)

Many molders help design parts and choose resins, and that design or material choice gets blamed when parts crack or fail.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Part design, mold flow analysis or resin selection offered as a service

**Controls that matter**

- Design work under signed agreements that leave final approval with the customer

### Umbrella and excess: Elevated (3 of 5)

A cracked pressure pipe, a failed vehicle part or a large plant fire reaching neighbors can produce claims beyond primary limits.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Safety-critical vehicle parts, fuel tanks or medical components
- Pressure pipe for gas or water service

**Controls that matter**

- Supply contracts that cap liability and fix design responsibility
- Lot traceability that limits a recall to the affected runs

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Large single-story steel buildings with press halls, extrusion lines, outdoor resin silos and big warehouses; many have grown by additions with gaps in sprinkler coverage.
- **Occupancy**: Molten plastic, heater bands and hydraulic oil at every machine, with cartons, pallets, foam and finished plastic goods stored close by and often to the roof.
- **Protection**: Sprinklers designed for plastic storage at actual heights, fire-resistant hydraulic fluid on big presses, gas detection on foam lines using pentane, and regular thermographic scans.
- **Exposure**: Industrial parks put molders beside their suppliers and customers; a plastics fire throws dense smoke over a wide area, and silos and trailers in the yard feed it.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What share of sales goes to vehicle, medical, food packaging, construction and consumer markets?
- What share of resin is recycled or compounded in-house, and from what sources?
- Which products are safety-critical, such as fuel tanks, pressure pipe or medical components?
- What penalties do just-in-time supply contracts carry for late or defective deliveries?
- How many shifts run, and how much of the workforce is temporary?

### Documents to request

- Loss runs for the current and prior policy terms
- Main customer contracts, including recall and penalty clauses
- Mold register with owners, values and storage locations
- Sprinkler design and inspection reports
- Latest quality system audit and customer scorecards

### On site: products and processes

- Which processes are used, and which resins in what yearly volume?
- Which foam products are made, and with which blowing agents?
- Where are resin dryers, granulators and compounding lines, and how is their dust collected?
- Which customers depend on this plant as sole source?

### On site: premises and protection

- Where are finished goods, cartons and pallets stored, and how high?
- What were sprinklers designed for, and has the storage changed since?
- What hydraulic fluid is used, and how are leaks found and fixed?
- When were electrical panels and heaters last scanned for hot spots?
- Where are baled scrap, regrind and recycled resin stored, and how close to the building?

### On site: molds and continuity

- Where are idle molds stored, and are they tagged by owner and protected from fire and water?
- Are duplicates or drawings held for the molds that run the largest jobs?
- Which other plants could run the molds after a loss?

### On site: people and records

- How are machine interlocks tested and mold changes locked out?
- What fires, injuries or product claims occurred in the last five years?

### Refer or decline if you find

- Foam production with flammable blowing agent and no gas detection
- Plastic goods stored above the sprinkler design height
- Bypassed safety gates on molding machines
- High-value customer molds with no insurance agreement
- Oil-soaked floors and pooled hydraulic fluid under presses

Location

## How UrbanStat data helps.

Wide metal-roofed plants lose roof coverings to wind and hail, and rain on molds and electrical cabinets does lasting damage. Power loss freezes resin in barrels and dies. Flood reaches press pits, chillers and ground-level tooling.

Wind · Hail · Tornado · Flood

- Wind, hail and tornado scores for the site inform roof terms where rain on molds, presses and control cabinets would stop production.
- Flood scores at the address show whether press pits, chillers and ground-level mold storage sit in the water's path before interruption cover is priced.
- Street-by-street exposure views reveal when a molder and the customers or suppliers it depends on share one industrial park, with alerts at a set threshold.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Wind · Hail · Tornado · Flood

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**2.8** recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

All other plastics product manufacturing

**2.8**

All private industry

**2.3**

0.9 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: All other plastics product manufacturing (NAICS 326199). Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**13** fatal work injuries in 2024.

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Other Plastics Product Manufacturing (NAICS 32619), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**1,008** citations from 312 inspections; 69% were classed serious, willful or repeat.

- 1910.147 The control of hazardous energy (lockout/tagout) **174**
- 1910.212 General requirements for all machines **76**
- 1910.134 Respiratory protection **58**
- 1910.1200 Hazard communication **55**
- 1910.178 Powered industrial trucks **47**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: All Other Plastics Product Manufacturing (NAICS 326199). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**443** facilities reported toxic chemical releases totaling **10.5 million pounds** on and off site.

- Styrene **8.7M**
- Methyl methacrylate **268,278**
- Toluene **201,989**

Chemicals released in the largest amounts, in pounds. 314 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: All Other Plastics Product Manufacturing (NAICS 326199). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Equipment breakdown**: Large presses, extruder gearboxes and chillers fail without fire and stop lines that have no spare capacity.
- **Contingent business interruption**: Specialty resins and colorants come from few producers, and one outage there leaves molders without material.
- **Product recall**: Vehicle, appliance and medical buyers charge back recall costs for parts traced to one bad run.
- **Molds and tooling of others**: Customers' molds fill the plant, are often worth more than the presses, and are rarely insured by anyone.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [326199](https://www.urbanstat.com/industry-risk-guides/naics/?q=326199) | All Other Plastics Product Manufacturing |
| NAICS 2022 | [326160](https://www.urbanstat.com/industry-risk-guides/naics/?q=326160) | Plastics Bottle Manufacturing |
| NAICS 2022 | [326122](https://www.urbanstat.com/industry-risk-guides/naics/?q=326122) | Plastics Pipe and Pipe Fitting Manufacturing |
| NAICS 2022 | [326150](https://www.urbanstat.com/industry-risk-guides/naics/?q=326150) | Urethane and Other Foam Product (except Polystyrene) Manufacturing |
| NAICS 2022 | [326140](https://www.urbanstat.com/industry-risk-guides/naics/?q=326140) | Polystyrene Foam Product Manufacturing |
| NAICS 2022 | [326112](https://www.urbanstat.com/industry-risk-guides/naics/?q=326112) | Plastics Packaging Film and Sheet (including Laminated) Manufacturing |
| NAICS 2022 | [326111](https://www.urbanstat.com/industry-risk-guides/naics/?q=326111) | Plastics Bag and Pouch Manufacturing |
| NAICS 2022 | [326113](https://www.urbanstat.com/industry-risk-guides/naics/?q=326113) | Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing |
| NAICS 2022 | [326121](https://www.urbanstat.com/industry-risk-guides/naics/?q=326121) | Unlaminated Plastics Profile Shape Manufacturing |
| NAICS 2022 | [326130](https://www.urbanstat.com/industry-risk-guides/naics/?q=326130) | Laminated Plastics Plate, Sheet (except Packaging), and Shape Manufacturing |
| NAICS 2022 | [325991](https://www.urbanstat.com/industry-risk-guides/naics/?q=325991) | Custom Compounding of Purchased Resins |
| SIC 1987, primary | [3089](https://www.urbanstat.com/industry-risk-guides/sic/?q=3089) | Plastics Products, NEC |
| SIC 1987 | [3081](https://www.urbanstat.com/industry-risk-guides/sic/?q=3081) | Unsupported Plastics Film and Sheet |
| SIC 1987 | [3084](https://www.urbanstat.com/industry-risk-guides/sic/?q=3084) | Plastics Pipe |
| SIC 1987 | [3086](https://www.urbanstat.com/industry-risk-guides/sic/?q=3086) | Plastics Foam Products |

**Related business types**

- [Plastics fabricators and finishers](https://www.urbanstat.com/industry-risk-guides/plastics-fabricators-and-finishers/)
- [Rubber product manufacturers](https://www.urbanstat.com/industry-risk-guides/rubber-product-manufacturers/)
- [Resin, synthetic rubber and fiber plants](https://www.urbanstat.com/industry-risk-guides/resin-synthetic-rubber-and-fiber-plants/)
- [Tool, die, mold and machine tool makers](https://www.urbanstat.com/industry-risk-guides/tool-die-mold-and-machine-tool-makers/)
- [Motor vehicle parts manufacturers](https://www.urbanstat.com/industry-risk-guides/motor-vehicle-parts-manufacturers/)
- [Compare Plastics molders and extruders with Plastics fabricators and finishers](https://www.urbanstat.com/industry-risk-guides/compare/?a=plastics-molders-and-extruders&b=plastics-fabricators-and-finishers)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/plastics-molders-and-extruders/

- Page: Plastics molders and extruders: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/plastics-molders-and-extruders/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
