---
title: "Plastics fabricators and finishers (NAICS 326199, SIC 3089): Industry Risk Guide"
description: "NAICS 326199 · SIC 3089. Plastics fabricators cut, machine, bend, weld and bond sheet, rod and tube into displays, guards, tanks and enclosures, then…"
url: https://www.urbanstat.com/industry-risk-guides/plastics-fabricators-and-finishers-naics-326199/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Plastics fabricators and finishers NAICS 326199 · SIC 3089

Plastics fabricators cut, machine, bend, weld and bond sheet, rod and tube into displays, guards, tanks and enclosures, then polish, coat, print or plate them; some cast or laminate tubs, showers and sinks. A heavy load of burnable plastic, fine dust, solvent cements and styrene resins meets saws, routers, heaters and open flame.

[**NAICS 326199** All Other Plastics Product Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-326199) · [**SIC 3089** Plastics Products, NEC](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3089) · [**NAICS 326191** Plastics Plumbing Fixture Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-326191)

Manufacturing · Updated November 2026

Risk profile

1. [Property High](#line-property)
2. [Business interruption Elevated](#line-bi)
3. [Premises liability Moderate](#line-gl)
4. [Products and completed work Elevated](#line-products)
5. [Workers’ injury Elevated](#line-wc)
6. [Commercial auto Moderate](#line-auto)
7. [Crime and theft Low](#line-crime)
8. [Inland marine and equipment Moderate](#line-marine)
9. [Environmental Moderate](#line-env)
10. [Cyber and data Moderate](#line-cyber)
11. [Professional liability Moderate](#line-prof)
12. [Umbrella and excess Elevated](#line-umbrella)

**Property.** Racks of acrylic, polycarbonate and foam board burn hot with dense smoke, alongside solvent cements, spray finishing and open-flame polishing.

Loss drivers

## Where losses come from.

1. Fires in plastic stock, dust and swarf started by flame polishing, heaters or laser cutters
2. Hand and finger injuries at saws, routers and presses, plus solvent vapor exposure
3. Fabricated tanks, guards or components that crack, leak or fail in service

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Plastics fabricators and finishers, colored by its rating
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: High, 4 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Laser cutters and CNC routers now run long unattended programs on acrylic, raising fire risk at night and on weekends when nobody is watching.
- Flatbed ultraviolet printing directly onto sheet has moved into fabrication shops, adding inks, curing lamps and heavier electrical loads to the plastics fire load.
- Recycled and bio-based sheet is gaining use, with less consistent properties that raise cracking and failure claims on tanks, guards and fixtures.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: High (4 of 5)

Racks of acrylic, polycarbonate and foam board burn hot with dense smoke, alongside solvent cements, spray finishing and open-flame polishing.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Flame polishing or strip heaters used beside dust and offcuts
- Sheet stock racked high under sprinklers designed for ordinary goods
- Laser cutters running unattended on acrylic

**Controls that matter**

- Sprinklers designed for plastics storage at the actual rack height
- Dust collection on saws and routers, emptied daily
- Solvent cements and coatings in rated cabinets and a spray booth

### Business interruption: Elevated (3 of 5)

Routers, lasers and forming ovens are replaceable in weeks, but custom jigs, saved programs and deadline-driven display work make short outages costly.

Covers: How long and how costly a shutdown is.

**Watch for**

- One router or thermoformer carrying most jobs
- Custom tooling and jigs with no drawings or backups

**Controls that matter**

- Programs and drawings backed up off site
- Named subcontract fabricators able to take overflow work

### Premises liability: Moderate (2 of 5)

Few visitors enter the shop; the exposure is installation work at retail, exhibition and industrial sites.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Crews installing displays, screens or signage at customers' premises

**Controls that matter**

- Written installation plans and insurance certificates from any subcontractor

### Products and completed work: Elevated (3 of 5)

Machine guards, chemical tanks, glazing and aircraft or medical parts injure people or leak when material or joints are wrong.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Chemical storage tanks and fume ducting built from welded sheet
- Safety glazing, machine guards or protective screens
- Work to customers' drawings with no material traceability

**Controls that matter**

- Material certificates matched to each job and retained
- Weld and joint testing on tanks before dispatch
- Contracts that fix who owns the design

### Workers’ injury: Elevated (3 of 5)

Table saws, routers, guillotines and hot forming tools cause cuts and burns, with solvent and dust exposure in the background.

Covers: Injuries and illness to employees.

**Watch for**

- Guards removed from saws to handle large sheets
- Solvent bonding done at open benches without extraction
- Manual handling of full-size sheets by one person

**Controls that matter**

- Guarding and lockout enforced on every cutting machine
- Local exhaust at bonding, polishing and spray stations
- Vacuum lifters or two-person handling for large sheet

### Commercial auto: Moderate (2 of 5)

A van or box truck delivers finished work and carries installers to site.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Long sheets or displays carried on unsuitable vehicles

**Controls that matter**

- Driver checks and load securing rules for delivery vehicles

### Crime and theft: Low (1 of 5)

Sheet plastic and part-finished work have little resale value, and customers pay on invoice.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Tooling and laptops left in vans overnight

**Controls that matter**

- Monitored alarm and vehicles emptied at close

### Inland marine and equipment: Moderate (2 of 5)

Customers' molded parts in for finishing, their tooling, and finished displays in transit or being installed.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Customers' parts or molds held with no record of value

**Controls that matter**

- Bailee and transit cover matched to the largest job

### Environmental: Moderate (2 of 5)

Most shops use small amounts of solvent cement and coatings; on-site plating, metalizing or fiberglass work raises the exposure.

Covers: Pollution on or from the site or the work.

**Watch for**

- Vacuum metalizing or chrome plating of plastic parts on site
- Chlorinated solvent cements used in volume
- Resin casting or fiberglass work with styrene emissions

**Controls that matter**

- Waste solvent and coating residues collected by a licensed hauler
- Closed containers and extraction to cut vapor loss

### Cyber and data: Moderate (2 of 5)

Router, laser and printer programs and customer drawings live on shop computers; ransomware stops cutting, but little personal data is held.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Machine programs stored only on the machines or one office computer

**Controls that matter**

- Off-site backups of programs and drawings, tested by restoring them

### Professional liability: Moderate (2 of 5)

Shops often size tanks, choose materials or detail guards for customers, and a design or material error leads to leaks or injury.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Tank sizing, wall thickness or material choice done by the shop

**Controls that matter**

- Engineered drawings and customer sign-off before fabricating tanks or guards

### Umbrella and excess: Elevated (3 of 5)

A failed chemical tank, a broken safety screen or a shop fire spreading to other tenants can produce claims beyond primary limits.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Chemical tanks or fume ducting for industrial plants
- Safety glazing or barriers for arenas, vehicles or public spaces

**Controls that matter**

- Contracts that cap liability and set who owns the design
- Indemnity and insurance certificates from customers who supply the design

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Light industrial units or older single-story buildings, often multi-tenant, with metal roofs, open shop floors, a spray booth and sheet stock racked along the walls.
- **Occupancy**: Saws, routers and lasers make dust and offcuts beside racked acrylic, polycarbonate and foam board, with solvent cements, coatings, flame polishing and styrene resin work.
- **Protection**: Sprinklers designed for plastics at the real rack height, dust collection emptied daily, a rated spray booth, flammable liquid cabinets, and fire detection on laser cutters.
- **Exposure**: Shared walls and roofs in light industrial parks carry smoke and heat from a plastics fire to neighbors, and outdoor scrap bins invite arson.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What share of work is displays, industrial parts, tanks, plumbing fixtures or installation at customers' sites?
- Are tubs, showers, sinks or hot tub shells made, and through which builders or dealers are they sold?
- Are drawings and material choices for tanks and guards approved by the customer in writing?
- What are the largest jobs by value, and which customers provide most of the work?
- Does customer property, such as molded parts or tooling, stay in the shop for finishing?

### Documents to request

- Loss runs for the current and prior policy terms
- Sprinkler and dust collector inspection reports
- Sample customer contract and installation terms
- Material certificates and weld test records for recent tank jobs

### On site: work performed

- Which plastics are worked, in what forms, and for which industries?
- Which finishing steps are done on site: polishing, painting, printing, plating?
- Are tanks, guards or glazing on the floor today, and whose drawings are they built to?
- Who designs the products, and is installation done by employees?

### On site: shop fire protection

- How high is sheet and foam stock stored, and what were sprinklers designed for?
- Where is flame polishing or heat bending done, and what is nearby?
- How is dust collected from saws and routers, and how often is it emptied?
- How are solvent cements and coatings stored, dispensed and ventilated?
- Who watches laser cutters while they run, and what fire detection is built in?

### On site: people and machines

- What guarding is fitted to each saw and router, and is it in use during the visit?
- What training covers lockout, solvent handling and sheet lifting?

### On site: records and history

- How are material certificates filed against each job, and for how long?
- What fires, injuries or product complaints occurred in the last five years?

### Refer or decline if you find

- Open-flame polishing at benches covered in dust and offcuts
- Plastic sheet racked above the sprinkler design height
- Unsprinklered building with foam board or expanded plastic stock
- Chemical tanks fabricated with no weld testing
- Plating or metalizing with no waste records

Location

## How UrbanStat data helps.

Clear sheet and finished displays are ruined by water, soot or smoke long before they burn. Light industrial units with metal roofs suffer wind and hail damage, and outdoor offcut bins are an easy arson target.

Flood · Wind · Hail · Crime

- Flood scores at the address show whether floor-stacked sheet stock and machine electronics in a ground-level unit are exposed to water.
- Parcel and permit data give building age, value and permit history, a check on whether sprinklers or electrical service were upgraded for plastics storage.
- Crime scores at the address indicate arson and break-in pressure on units with outdoor scrap bins and pallets.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Wind · Hail · Crime

Public loss data · NAICS 326199

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**2.8** recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

All other plastics product manufacturing

**2.8**

All private industry

**2.3**

0.9 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: All other plastics product manufacturing (NAICS 326199). Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**13** fatal work injuries in 2024.

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Other Plastics Product Manufacturing (NAICS 32619), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**1,008** citations from 312 inspections; 69% were classed serious, willful or repeat.

- 1910.147 The control of hazardous energy (lockout/tagout) **174**
- 1910.212 General requirements for all machines **76**
- 1910.134 Respiratory protection **58**
- 1910.1200 Hazard communication **55**
- 1910.178 Powered industrial trucks **47**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: All Other Plastics Product Manufacturing (NAICS 326199). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**443** facilities reported toxic chemical releases totaling **10.5 million pounds** on and off site.

- Styrene **8.7M**
- Methyl methacrylate **268,278**
- Toluene **201,989**

Chemicals released in the largest amounts, in pounds. 314 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: All Other Plastics Product Manufacturing (NAICS 326199). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Equipment breakdown**: CNC routers, lasers and forming ovens fail electrically or mechanically, stopping deadline-driven display and fixture work.
- **Installation floater**: Displays, screens and fixtures being installed at customers' sites sit outside the shop's property cover until handover.
- **Pollution legal liability**: Styrene, plating and solvent wastes from finishing and fixture work can contaminate soil and drains.

## NAICS and SIC codes for plastics fabricators and finishers

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [326199](https://www.urbanstat.com/industry-risk-guides/naics/#naics-326199) | All Other Plastics Product Manufacturing |
| NAICS 2022 | [326191](https://www.urbanstat.com/industry-risk-guides/naics/#naics-326191) | Plastics Plumbing Fixture Manufacturing |
| SIC 1987, primary | [3089](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3089) | Plastics Products, NEC |
| SIC 1987 | [3088](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3088) | Plastics Plumbing Fixtures |

**Related business types**

- [Plastics molders and extruders NAICS 326199](https://www.urbanstat.com/industry-risk-guides/plastics-molders-and-extruders-naics-326199/)
- [Sign shops NAICS 339950](https://www.urbanstat.com/industry-risk-guides/sign-shops-naics-339950/)
- [Countertop fabricators NAICS 327991](https://www.urbanstat.com/industry-risk-guides/countertop-fabricators-naics-327991/)
- [Fiberglass boat builders NAICS 336612](https://www.urbanstat.com/industry-risk-guides/fiberglass-boat-builders-naics-336612/)
- [Woodworking shops NAICS 337110](https://www.urbanstat.com/industry-risk-guides/woodworking-shops-naics-337110/)
- [Compare Plastics fabricators and finishers with Plastics molders and extruders](https://www.urbanstat.com/industry-risk-guides/compare/?a=plastics-fabricators-and-finishers-naics-326199&b=plastics-molders-and-extruders-naics-326199)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/plastics-fabricators-and-finishers-naics-326199/

- Page: Plastics fabricators and finishers (NAICS 326199, SIC 3089): Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/plastics-fabricators-and-finishers-naics-326199/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
