---
title: "Petroleum refineries (NAICS 324110, SIC 2911): Industry Risk Guide"
description: "NAICS 324110 · SIC 2911. Petroleum refineries distill crude oil and upgrade the fractions by cracking, reforming, alkylation and hydrotreating into fuels,…"
url: https://www.urbanstat.com/industry-risk-guides/petroleum-refineries-naics-324110/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Petroleum refineries NAICS 324110 · SIC 2911

Petroleum refineries distill crude oil and upgrade the fractions by cracking, reforming, alkylation and hydrotreating into fuels, asphalt, coke and chemical feedstocks. Huge volumes of flammable hydrocarbons and toxic gases move hot and under pressure, so one leak can become a vapor cloud explosion followed by months of shutdown.

[**NAICS 324110** Petroleum Refineries](https://www.urbanstat.com/industry-risk-guides/naics/#naics-324110) · [**SIC 2911** Petroleum Refining](https://www.urbanstat.com/industry-risk-guides/sic/#sic-2911)

Manufacturing · Updated November 2026

Risk profile

1. [Property Severe](#line-property)
2. [Business interruption Severe](#line-bi)
3. [Premises liability High](#line-gl)
4. [Products and completed work Elevated](#line-products)
5. [Workers’ injury High](#line-wc)
6. [Commercial auto Moderate](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental Severe](#line-env)
10. [Cyber and data High](#line-cyber)
11. [Professional liability Low](#line-prof)
12. [Umbrella and excess Severe](#line-umbrella)

**Property.** Hydrocarbons held above their flash point and under pressure across dense process units give a single leak the power to flatten whole units.

Loss drivers

## Where losses come from.

1. Leaks from corroded piping, failed seals or unit upsets that ignite as fires or vapor cloud explosions
2. Long, costly shutdowns after damage to a crude unit, cracker or other single bottleneck
3. Toxic releases of hydrogen sulfide or hydrofluoric acid reaching workers, contractors and neighbors

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Petroleum refineries, colored by its rating
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: Severe, 5 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: Severe, 5 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: High, 4 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Severe, 5 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: High, 4 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: Severe, 5 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Conversions to renewable diesel and jet fuel bring animal fats and vegetable oils on site, with higher hydrogen demand and unfamiliar corrosion and fouling.
- Closures and consolidation leave fewer, older refineries running harder, so one outage moves fuel prices while inspection and maintenance budgets stay tight.
- Fence-line monitoring and larger jury awards make neighborhood exposure, flaring and odor claims more costly after every release.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: Severe (5 of 5)

Hydrocarbons held above their flash point and under pressure across dense process units give a single leak the power to flatten whole units.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Thinning and corrosion under insulation in sour or high-acid crude service
- Process units, control rooms and contractor trailers packed close together
- Deferred turnarounds and aging piping with overdue inspections

**Controls that matter**

- Risk-based inspection of piping, vessels and relief devices kept current
- Fixed fire water monitors, deluge and foam systems on units and tanks
- Remote isolation valves on large inventories and blast-resistant control rooms

### Business interruption: Severe (5 of 5)

Units run in series with custom reactors, compressors and columns, so one fire can stop all output for many months.

Covers: How long and how costly a shutdown is.

**Watch for**

- A single crude unit or cracker with no parallel train
- Dependence on one pipeline, dock, power feed or hydrogen supplier
- Large custom vessels or compressors with long build times

**Controls that matter**

- Critical spares inventory and pre-arranged fabrication capacity
- Product exchange agreements with other refiners to keep customers supplied
- Backup power, steam and cooling water for a safe, controlled shutdown

### Premises liability: High (4 of 5)

Blast pressure, smoke and toxic gas travel beyond the fence, and turnarounds put hundreds of contractor workers among live units.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Housing, schools or highways close to the fence line
- Hydrofluoric acid alkylation near populated areas
- Flaring, odor and soot complaints building toward neighborhood suits

**Controls that matter**

- Fence-line air monitoring with alerts shared with the community
- Emergency plans drilled with local responders and nearby schools
- Contractor prequalification and permit-to-work during turnarounds

### Products and completed work: Elevated (3 of 5)

Off-specification gasoline, diesel or jet fuel damages engines across a whole market, and contaminated aviation fuel can stop engines in flight.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Jet fuel and aviation gasoline in the product slate
- Renewable components or new additives blended into finished fuel
- Benzene-bearing solvents and fuels that draw long-tail exposure claims from users

**Controls that matter**

- Laboratory certification of each batch before release to pipeline or rack
- Retained samples and tank-to-shipment traceability

### Workers’ injury: High (4 of 5)

Burns, hydrogen sulfide exposure, falls and confined space entry cause rare but very severe injuries, clustered in turnarounds and upsets.

Covers: Injuries and illness to employees.

**Watch for**

- Operators on long shifts through startups and shutdowns
- Hydrogen sulfide in sour water, amine and sulfur recovery units
- Vessel and tank entry during turnarounds

**Controls that matter**

- Personal gas monitors and flame-resistant clothing for everyone in the units
- Permit-to-work, gas testing and rescue standby for every entry
- Overtime and fatigue limits enforced during turnarounds

### Commercial auto: Moderate (2 of 5)

Product leaves by pipeline, rail, barge and contracted tank trucks; owned vehicles are mostly pickups and plant service trucks.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- An owned tank truck fleet, or outside drivers loading unsupervised at the rack

**Controls that matter**

- Carrier insurance certificates and rack loading training for every driver

### Crime and theft: Moderate (2 of 5)

Little cash is held, but fuel diversion, padded contractor invoices and fraud on large commodity payments add up.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Contractor timesheets and invoices approved without field checks
- Rack meters and tank inventories not reconciled daily

**Controls that matter**

- Dual approval and callback checks on payments and bank details
- Daily hydrocarbon balance reconciled by someone outside operations

### Inland marine and equipment: Elevated (3 of 5)

Crude and products in transit by barge, rail and pipeline, plus rented cranes during turnarounds, carry high values around the site.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Title to crude passing to the refinery long before delivery
- Large cranes rented for turnarounds under contracts that shift the risk

**Controls that matter**

- Transit cover matched to how crude is bought and products are sold
- Lift plans, and crane contracts reviewed for who carries the loss

### Environmental: Severe (5 of 5)

Tank farms, buried piping, sludges and air emissions make spills, groundwater plumes and permit breaches routine exposures.

Covers: Pollution on or from the site or the work.

**Watch for**

- Legacy hydrocarbon plumes under the site or acquired land
- Aging tank bottoms and buried lines without leak detection
- Emergency flaring and emission exceedances

**Controls that matter**

- Tank inspection program with double bottoms and leak detection
- Groundwater monitoring wells and recovery systems
- Contained stormwater and treated wastewater before discharge

### Cyber and data: High (4 of 5)

Distributed control and safety systems run the units; an attack or outage forces a shutdown and could weaken protective layers.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Control networks reachable from business systems or vendor remote access
- Older control hardware that cannot be patched

**Controls that matter**

- Segmented control networks with monitored, one-way connections
- Offline backups and drilled manual shutdown procedures

### Professional liability: Low (1 of 5)

No professional service is sold; process design errors rest with licensors and engineering contractors, and fuel quality falls under products.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Laboratory testing or engineering services sold to outside parties

**Controls that matter**

- Written terms limiting liability for any testing sold to others

### Umbrella and excess: Severe (5 of 5)

A vapor cloud explosion or toxic release can kill workers and contractors and damage homes far from the site, well beyond primary limits.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Population density around the fence line
- Units holding hydrofluoric acid or large hydrogen inventories

**Controls that matter**

- Process hazard analyses with independent safety layers kept current
- Siting studies that move occupied buildings out of blast zones

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Open steel process structures, pipe racks, columns and fired heaters spread over a large site, with tank farms, a dock or rail yard, and masonry or blast-resistant control buildings.
- **Occupancy**: Continuous distillation, cracking, reforming and hydrotreating at high temperature and pressure, with hydrogen, sulfur compounds, acids and open-flame heaters throughout the process area.
- **Protection**: Plant fire brigade, a looped fire water main with pumps and monitors, deluge and foam systems, gas detection, emergency isolation valves, flares and automatic safety shutdowns.
- **Exposure**: Refineries anchor industrial corridors beside ports, rail and chemical plants, so a blast affects neighbors and their losses reach the refinery; housing often sits near the fence.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What is the crude capacity, the crude slate and the list of major conversion units?
- When was each major unit last turned around, and what work was deferred?
- Does the site run hydrofluoric acid alkylation, and what mitigation surrounds it?
- Which fires, releases and process safety incidents occurred recently, and what changed after each?
- Which units are single trains, and what spares and outside supply cover them?
- Is any unit being converted to renewable feedstocks, and how far along is the project?

### Documents to request

- Loss history with root-cause reports for fires and releases
- Latest engineering survey and status of open recommendations
- Process hazard analysis and facility siting study summaries
- Mechanical integrity and inspection backlog report
- Emergency response plan and mutual aid agreements

### On site: process units

- Which units hold the largest hydrocarbon inventories, and how quickly can each be isolated?
- How are thinning and corrosion under insulation tracked in high-risk piping circuits?
- Which safety system functions are bypassed today, and who approved each bypass?

### On site: fire and emergency response

- What fire water capacity, pumps and backup drivers serve the units and tank farm?
- How is the fire brigade trained, staffed on night shifts and backed by mutual aid?
- Where are control rooms, offices and contractor trailers relative to modeled blast zones?

### On site: tanks and environment

- What condition are tank floors, seals and dikes in, and when were tanks last inspected inside?
- How is groundwater monitored, and are there known plumes or recovery systems?
- How often has the flare run in emergency service this year, and why?

### On site: people and change

- How are contractors vetted, supervised and trained before working in live units?
- What overtime limits apply to operators during turnarounds and upsets?
- How is management of change applied to small modifications and temporary repairs?

### Refer or decline if you find

- Large inspection backlog or overdue turnarounds on major units
- Occupied trailers or buildings inside modeled blast zones
- Repeated unit fires or releases with root-cause actions left open
- Safety systems bypassed for long periods without formal approval
- Hydrofluoric acid alkylation without water mitigation near housing

Location

## How UrbanStat data helps.

Many refineries sit on low coastal ground beside ports, where hurricanes, surge and floods damage units and force slow, costly restarts. Others sit in seismic zones, where earthquakes crack tanks, piping and tall columns.

Hurricane · Storm surge · Flood · Earthquake · Wind

- Storm surge and flood scores at the address show how exposed process units, tank farms and switchgear on low coastal land are before capacity is committed.
- Live hurricane tracks and storm surge overlays show which refineries and neighboring insured plants lie in the path, so loss adjusting and reserving can be planned early.
- Street-by-street exposure views total the insured value packed into one refinery corridor, where one explosion can damage many plants, with alerts when a threshold is passed.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Hurricane · Storm surge · Flood · Earthquake

Public loss data · NAICS 324110

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**0.4** recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.

Petroleum refineries

**0.4**

All private industry

**2.3**

0.1 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Petroleum refineries (NAICS 32411), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**7** fatal work injuries in 2024, most often from exposure to harmful substances or environments (3).

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Petroleum and Coal Products Manufacturing (NAICS 3241), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**148** citations from 30 inspections; 32% were classed serious, willful or repeat.

- 1910.119 Process safety management of highly hazardous chemicals **12**
- 1910.134 Respiratory protection **3**
- General duty clause: recognized hazards likely to cause death or serious harm **2**
- 1910.1200 Hazard communication **2**
- 1910.1001 Asbestos **2**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Petroleum Refineries (NAICS 324110). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**138** facilities reported toxic chemical releases totaling **71.9 million pounds** on and off site.

- Nitrate compounds **27.3M**
- Ammonia **7.8M**
- Hydrogen sulfide **5.6M**

Chemicals released in the largest amounts, in pounds. 138 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Petroleum Refineries (NAICS 324110). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Equipment breakdown**: Compressors, turbines, transformers and reactor internals fail without fire and can idle a unit for months.
- **Contingent business interruption**: A pipeline, dock, power or hydrogen supplier outage stops the refinery even when the site itself is undamaged.
- **Product recall**: Off-specification fuel already in pipelines, terminals and station tanks must be traced, withdrawn and replaced quickly.
- **Stock throughput and ocean cargo**: Crude and products moving by tanker, barge and pipeline need cover from the load point to the tank.
- **Terrorism and sabotage**: Refineries are critical infrastructure, and property policies often exclude deliberate attacks on the site.

## NAICS and SIC codes for petroleum refineries

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [324110](https://www.urbanstat.com/industry-risk-guides/naics/#naics-324110) | Petroleum Refineries |
| SIC 1987, primary | [2911](https://www.urbanstat.com/industry-risk-guides/sic/#sic-2911) | Petroleum Refining |

**Related business types**

- [Petrochemical and basic chemical plants NAICS 325110](https://www.urbanstat.com/industry-risk-guides/petrochemical-and-basic-chemical-plants-naics-325110/)
- [Natural gas processing plants NAICS 211130](https://www.urbanstat.com/industry-risk-guides/natural-gas-processing-plants-naics-211130/)
- [Biofuel production NAICS 325193](https://www.urbanstat.com/industry-risk-guides/biofuel-production-naics-325193/)
- [Pipeline operators NAICS 486110](https://www.urbanstat.com/industry-risk-guides/pipeline-operators-naics-486110/)
- [Wholesale petroleum marketers NAICS 424710](https://www.urbanstat.com/industry-risk-guides/wholesale-petroleum-marketers-naics-424710/)
- [Compare Petroleum refineries with Petrochemical and basic chemical plants](https://www.urbanstat.com/industry-risk-guides/compare/?a=petroleum-refineries-naics-324110&b=petrochemical-and-basic-chemical-plants-naics-325110)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/petroleum-refineries-naics-324110/

- Page: Petroleum refineries (NAICS 324110, SIC 2911): Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/petroleum-refineries-naics-324110/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
