---
title: "Petrochemical and basic chemical plants: Industry Risk Guide"
description: "These plants crack, react and distill hydrocarbons, salt and minerals into ethylene, propylene, benzene, chlorine, caustic soda, acids and solvents that…"
url: https://www.urbanstat.com/industry-risk-guides/petrochemical-and-basic-chemical-plants/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Petrochemical and basic chemical plants

These plants crack, react and distill hydrocarbons, salt and minerals into ethylene, propylene, benzene, chlorine, caustic soda, acids and solvents that other industries build on. Large inventories of flammable and toxic material run around the clock at high pressure and temperature, so one loss of containment can destroy units and reach neighbors.

Manufacturing · NAICS 325110 · SIC 2869 · Updated November 2026

Risk profile

1. [Property Severe](#line-property)
2. [Business interruption Severe](#line-bi)
3. [Premises liability High](#line-gl)
4. [Products and completed work Elevated](#line-products)
5. [Workers’ injury High](#line-wc)
6. [Commercial auto Moderate](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment Moderate](#line-marine)
9. [Environmental Severe](#line-env)
10. [Cyber and data High](#line-cyber)
11. [Professional liability Low](#line-prof)
12. [Umbrella and excess Severe](#line-umbrella)

**Property.** Cracking furnaces, reactors and columns hold flammable gas and liquid at high pressure, and a vapor cloud explosion can flatten whole units.

Loss drivers

## Where losses come from.

1. Vapor cloud explosions and fires after a leak from a pump seal, flange or corroded line
2. Toxic releases of chlorine, hydrogen chloride or ethylene oxide that reach workers and nearby neighborhoods
3. Long shutdowns after a furnace, compressor or reactor failure, with knock-on losses at customers

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Petrochemical and basic chemical plants
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: Severe, 5 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: Severe, 5 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: High, 4 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Severe, 5 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: High, 4 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: Severe, 5 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Large crackers built near low-cost gas supply concentrate huge values in a few new sites, raising accumulation and interruption exposure.
- Public fence-line monitoring and neighbors' cancer suits over ethylene oxide, benzene and chlorinated emissions turn routine releases into long-tail toxic tort claims.
- Electrified furnaces, hydrogen and carbon capture projects bring unproven technology into old sites through long construction and startup periods.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: Severe (5 of 5)

Cracking furnaces, reactors and columns hold flammable gas and liquid at high pressure, and a vapor cloud explosion can flatten whole units.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Deferred turnarounds and corrosion under insulation on hydrocarbon lines
- Congested pipe racks and structures where a release builds explosion pressure
- Units running above original design rates or on new feedstocks

**Controls that matter**

- Process hazard analyses revalidated on schedule, with actions tracked to closure
- Mechanical integrity program for piping, vessels and relief devices
- Fixed gas detection, deluge on critical equipment and remote isolation valves

### Business interruption: Severe (5 of 5)

Integrated units feed each other, so one failed compressor or furnace stops the chain, and large rotating equipment takes many months to replace.

Covers: How long and how costly a shutdown is.

**Watch for**

- A single cracker or electrolyzer feeding every downstream unit on site
- Feedstock arriving by one pipeline, port or neighboring refinery
- Pipeline customers next door with no other source of supply

**Controls that matter**

- Critical spares for compressors, transformers and electrolyzer parts held on site
- Intermediate storage between units and alternate feedstock routes

### Premises liability: High (4 of 5)

A toxic cloud, blast wave or heavy smoke plume reaches homes, roads and schools, bringing shelter orders and mass claims.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Housing, schools or highways that have grown up to the fence line
- Shared sites where other companies' staff work alongside the insured's units
- Hundreds of contractors on site during turnarounds

**Controls that matter**

- Fence-line monitoring and community alert systems tested with local responders
- Contractor prequalification and permit-to-work for every outside crew

### Products and completed work: Elevated (3 of 5)

Most output is commodity feedstock sold to specification, but contaminated product ruins customers' batches and benzene-type exposures bring long-tail injury suits.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Grades sold for food contact, drinking water treatment or pharmaceutical use
- Pipeline deliveries, where contamination spreads before anyone detects it
- Fluorinated chemicals and other legacy products now tied to chronic illness suits

**Controls that matter**

- Certificates of analysis and retained samples for every shipment
- Safety data sheets and product stewardship kept current for every grade

### Workers’ injury: High (4 of 5)

Operators and contractors face fire, toxic gas, steam and caustic burns, and confined space entries packed into turnarounds.

Covers: Injuries and illness to employees.

**Watch for**

- Turnarounds staffed by temporary contractors working long shifts
- Line breaking and vessel entry on equipment that still holds chemicals
- Chronic exposure to benzene, butadiene or ethylene oxide

**Controls that matter**

- Permit-to-work with gas testing, positive isolation and standby attendants
- Personal gas monitors and flame-resistant clothing for all field staff
- Exposure sampling and medical surveillance for listed chemicals

### Commercial auto: Moderate (2 of 5)

Bulk product leaves by pipeline, rail, barge and contract tankers; the plant's own driving is mostly light vehicles and yard equipment.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Owned tank trucks carrying hazardous product on public roads

**Controls that matter**

- Carrier vetting for hazardous loads, with safety and insurance records checked

### Crime and theft: Moderate (2 of 5)

Precious metal catalysts and copper cable draw theft, and large feedstock payments are a target for invoice fraud.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Spent platinum or palladium catalyst stored before return for recovery
- Supplier bank detail changes requested by email

**Controls that matter**

- Locked, logged storage for catalyst drums and copper stock
- Call-back verification before any change to payment details

### Inland marine and equipment: Moderate (2 of 5)

Product sits in leased railcars, barges and outside terminals, and heavy spares travel out for overhaul and catalyst regeneration.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Compressor rotors and large spares shipped out for repair
- Product stored at third-party terminals or in railcars awaiting sale

**Controls that matter**

- Declared values and rigging plans for heavy spares in transit

### Environmental: Severe (5 of 5)

Leaks, spills and fire water carry hydrocarbons, chlorinated compounds and caustic into soil, groundwater and rivers, often on sites already contaminated.

Covers: Pollution on or from the site or the work.

**Watch for**

- Legacy mercury cells, chlorinated waste pits or unlined lagoons
- Flaring events and air permit exceedances that draw neighbor complaints
- Tank farms without full secondary containment

**Controls that matter**

- Diked tank farms and curbed process areas draining to treatment
- Fire-water retention sized for a major fire
- Groundwater monitoring and leak detection on tanks and buried lines

### Cyber and data: High (4 of 5)

Distributed control and safety instrumented systems run every unit; an attack on them can defeat trips, and office ransomware forces precautionary shutdowns.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Remote vendor access to control and safety systems
- Office and control networks with no separation between them
- Control system workstations on old, unsupported operating systems

**Controls that matter**

- Segmented control networks with monitored, time-limited remote access
- Safety instrumented systems kept independent of the main control system

### Professional liability: Low (1 of 5)

No professional service is sold; handling advice given to customers is incidental to product sales.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Operating units or supplying utilities for other companies under contract

**Controls that matter**

- Written service agreements that define duties and limit liability

### Umbrella and excess: Severe (5 of 5)

One explosion or toxic release can kill workers and contractors, injure a neighborhood and close a highway, far beyond primary limits.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Large populations inside the worst-case toxic release zone
- Turnarounds that multiply the number of people near live units

**Controls that matter**

- Occupied buildings sited or blast-hardened according to a facility siting study
- Release scenarios modeled and shared with emergency planners

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Open-air process units on steel structures with pipe racks, tank farms, cooling towers and control rooms; older sites mix generations of additions, with fireproofing in uneven condition.
- **Occupancy**: Continuous cracking, reaction, distillation and electrolysis of flammable, toxic and corrosive materials at high pressure and temperature, around fired heaters, large compressors and loading racks.
- **Protection**: Fireproofed steel, fixed monitors and deluge, foam for tanks, gas and flame detection, emergency isolation valves, a trained plant fire brigade and blast-resistant control rooms.
- **Exposure**: Plants sit in clusters of refineries and chemical sites on ports and rivers, so a neighbor's explosion or fire reaches across the fence and along shared pipelines.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- Which units run on site, at what capacities, and which feedstocks and products are handled?
- When was each unit's last turnaround, and what inspections or repairs were deferred?
- What fires, releases or process safety near misses have occurred, and what changed afterwards?
- Which customers depend on pipeline supply, and what penalties apply if delivery stops?
- How many people live, work or study inside the worst-case release zone?

### Documents to request

- Loss runs and the process safety incident log
- Latest process hazard analyses and facility siting study
- Mechanical integrity and relief valve inspection schedules
- Emergency response plan and fire brigade training records
- Environmental permits and any open enforcement actions

### On site: process units

- Which units run beyond original design rates, and were those changes reviewed for hazards?
- How are changes to chemicals, equipment or operating limits reviewed and approved?
- Where are the largest flammable or toxic inventories, and how fast can they be isolated?

### On site: plant and protection

- What condition are pipe racks, insulation and fireproofing in around hydrocarbon units?
- How far are control rooms and occupied buildings from process units, and are they blast-resistant?
- What fire water, deluge and foam systems exist, and when were they last flow tested?
- How often are gas detectors, interlocks and safety instrumented functions proof tested?

### On site: people and contractors

- How many contractors are on site today, and how are they inducted and supervised?
- How are permits, isolations and gas tests checked before line breaking or vessel entry?
- What exposure monitoring covers benzene, butadiene, ethylene oxide and other listed chemicals?

### On site: environment and records

- Where do stormwater and fire water drain, and how much can the site hold back?
- What do recent flaring logs, permit reports and groundwater results show?
- Which process safety actions are overdue, and who owns each one?

### Refer or decline if you find

- Overdue process hazard analyses or many open recommendations from past reviews
- Relief valves, piping or vessels past their inspection due dates
- Temporary trailers or offices placed beside live process units
- Interlocks or safety systems left in bypass without approval
- A recent fire or release with no completed root-cause investigation

Location

## How UrbanStat data helps.

Plants cluster on low coastal and river land beside ports, where surge and flood swamp pumps, switchgear and tank bases. Storms force full shutdowns, and restarts afterwards are when many fires and releases happen.

Hurricane · Storm surge · Flood · Wind · Earthquake

- Storm surge and flood scores at the plant address show whether substations, pumps and tank foundations sit within reach of water before deductibles are set.
- Street-by-street exposure views total the insured value inside one chemical cluster, with alerts when accumulation around a single plant passes a set threshold.
- Live hurricane tracks and surge overlays show which insured plants, terminals and tank farms are in the path while shutdown decisions are being made.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Hurricane · Storm surge · Flood · Wind

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**0.5** recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.

Petrochemical manufacturing

**0.5**

All private industry

**2.3**

United States, 2024. Industry: Petrochemical manufacturing (NAICS 32511), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**3** fatal work injuries in 2024.

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Basic Chemical Manufacturing (NAICS 3251), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**67** citations from 20 inspections; 82% were classed serious, willful or repeat.

- 1910.1025 Lead **16**
- 1910.1027 Cadmium **15**
- 1910.22 General requirements (walking-working surfaces) **4**
- 1910.37 Maintenance, safeguards, and operational features for exit routes **3**
- 1910.147 The control of hazardous energy (lockout/tagout) **3**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Other Basic Inorganic Chemical Manufacturing (NAICS 325180). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**54** facilities reported toxic chemical releases totaling **22.9 million pounds** on and off site.

- Propylene **6.7M**
- Ethylene **4.3M**
- Methanol **1.2M**

Chemicals released in the largest amounts, in pounds. 46 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Petrochemical Manufacturing (NAICS 325110). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Equipment breakdown**: Compressors, turbines, transformers and electrolyzers fail mechanically or electrically without fire, and repairs take months.
- **Contingent business interruption**: A loss at a feedstock supplier, utility provider or pipeline customer stops an undamaged plant.
- **Pollution legal liability**: General liability pollution exclusions leave gradual leaks, legacy contamination and cleanup orders largely uninsured.
- **Product recall**: Contaminated food-contact, water treatment or pharmaceutical grades force customers to pull finished goods and bill the supplier.
- **Transit and cargo**: Railcars, barges and tank trucks of hazardous product need cover for cargo loss and cleanup after a spill.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [325110](https://www.urbanstat.com/industry-risk-guides/naics/?q=325110) | Petrochemical Manufacturing |
| NAICS 2022 | [325180](https://www.urbanstat.com/industry-risk-guides/naics/?q=325180) | Other Basic Inorganic Chemical Manufacturing |
| NAICS 2022 | [325194](https://www.urbanstat.com/industry-risk-guides/naics/?q=325194) | Cyclic Crude, Intermediate, and Gum and Wood Chemical Manufacturing |
| NAICS 2022 | [325199](https://www.urbanstat.com/industry-risk-guides/naics/?q=325199) | All Other Basic Organic Chemical Manufacturing |
| SIC 1987, primary | [2869](https://www.urbanstat.com/industry-risk-guides/sic/?q=2869) | Industrial Organic Chemicals, NEC |
| SIC 1987 | [2865](https://www.urbanstat.com/industry-risk-guides/sic/?q=2865) | Cyclic Organic Crudes and Intermediates, and Organic Dyes and Pigments |
| SIC 1987 | [2812](https://www.urbanstat.com/industry-risk-guides/sic/?q=2812) | Alkalies and Chlorine |
| SIC 1987 | [2819](https://www.urbanstat.com/industry-risk-guides/sic/?q=2819) | Industrial Inorganic Chemicals, NEC |

**Related business types**

- [Petroleum refineries](https://www.urbanstat.com/industry-risk-guides/petroleum-refineries/)
- [Industrial gas manufacturers](https://www.urbanstat.com/industry-risk-guides/industrial-gas-manufacturers/)
- [Resin, synthetic rubber and fiber plants](https://www.urbanstat.com/industry-risk-guides/resin-synthetic-rubber-and-fiber-plants/)
- [Natural gas processing plants](https://www.urbanstat.com/industry-risk-guides/natural-gas-processing-plants/)
- [Fertilizer manufacturers and blenders](https://www.urbanstat.com/industry-risk-guides/fertilizer-manufacturers-and-blenders/)
- [Compare Petrochemical and basic chemical plants with Petroleum refineries](https://www.urbanstat.com/industry-risk-guides/compare/?a=petrochemical-and-basic-chemical-plants&b=petroleum-refineries)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/petrochemical-and-basic-chemical-plants/

- Page: Petrochemical and basic chemical plants: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/petrochemical-and-basic-chemical-plants/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
