---
title: "Paint and coating manufacturers: Industry Risk Guide"
description: "Paint manufacturers disperse pigments into resins and solvents or water, then thin, tint, filter and fill the product into cans, pails, aerosols and totes.…"
url: https://www.urbanstat.com/industry-risk-guides/paint-and-coating-manufacturers/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Paint and coating manufacturers

Paint manufacturers disperse pigments into resins and solvents or water, then thin, tint, filter and fill the product into cans, pails, aerosols and totes. Water-based lines carry far less fire hazard, but solvent-based, nitrocellulose and resin-cooking operations bring flammable liquids, static ignition and a large pollution footprint.

Manufacturing · NAICS 325510 · SIC 2851 · Updated November 2026

Risk profile

1. [Property High](#line-property)
2. [Business interruption Elevated](#line-bi)
3. [Premises liability Moderate](#line-gl)
4. [Products and completed work Elevated](#line-products)
5. [Workers’ injury Elevated](#line-wc)
6. [Commercial auto Elevated](#line-auto)
7. [Crime and theft Low](#line-crime)
8. [Inland marine and equipment Moderate](#line-marine)
9. [Environmental High](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Moderate](#line-prof)
12. [Umbrella and excess Elevated](#line-umbrella)

**Property.** Open mixing vessels, portable tanks and filling lines release solvent vapor where static or a hot bearing can ignite it.

Loss drivers

## Where losses come from.

1. Flammable liquid fires started by static during mixing, transfer and filling
2. Solvent, resin and wash-water spills from tank farms, drum yards and floor drains
3. Coatings that peel, blister, discolor or fail to protect on large projects

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Paint and coating manufacturers
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: High, 4 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Elevated, 3 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: High, 4 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Limits on volatile organic compounds push output toward water-based and powder coatings, lowering fire load but adding freeze damage and dust explosion exposure.
- More paint is tinted in stores or sold online for home delivery, moving color-matching and shipping exposure away from the plant.
- Litigation over legacy lead pigments, asbestos and newer fluorinated additives keeps long-tail product exposure alive for established makers.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: High (4 of 5)

Open mixing vessels, portable tanks and filling lines release solvent vapor where static or a hot bearing can ignite it.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Nitrocellulose lacquers or resin cooked in heated kettles
- Plastic totes of flammable liquid stored in the production building
- Aerosol can filling with flammable propellant gas on site

**Controls that matter**

- Bonding, grounding and inerting on solvent mixing and transfer
- Foam-water sprinklers with drainage and cutoff rooms for flammables
- Bulk solvents in a diked outdoor tank farm, piped to the mixers

### Business interruption: Elevated (3 of 5)

Dispersers, mills and fillers are fairly standard, but color-matched and specified products are hard to source from a competitor.

Covers: How long and how costly a shutdown is.

**Watch for**

- Coatings approved by automotive, aerospace or marine customers
- A single resin or pigment supplier for key lines

**Controls that matter**

- Formulas and color standards backed up off site
- Toll manufacturing agreement tested with trial batches

### Premises liability: Moderate (2 of 5)

Factory visitors are few; a trade counter or factory store adds ordinary retail traffic.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Solvent odor or fire exposure to adjoining premises

**Controls that matter**

- Vapor controls and separation from neighbors' buildings

### Products and completed work: Elevated (3 of 5)

A failed coating means stripping and repainting a ship, bridge, floor or production run, and consumer products raise health allegations.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Marine, protective and intumescent coatings with performance warranties
- Coatings for toys, food cans or drinking water tanks
- Legacy lead or asbestos-containing products

**Controls that matter**

- Batch testing, retained samples and written application instructions
- Warranty terms that cap liability to product replacement
- Current safety data sheets and compliant hazard labels

### Workers’ injury: Elevated (3 of 5)

Solvent vapor, pigment dust, drum handling and rotating disperser shafts produce a steady run of injuries and exposure claims.

Covers: Injuries and illness to employees.

**Watch for**

- Operators leaning over open tanks while dispersers run
- Powder pigments tipped by hand without extraction
- Isocyanate hardeners handled without respiratory protection

**Controls that matter**

- Lidded tanks with local exhaust and interlocked disperser guards
- Drum lifters and tote handling in place of manual tipping
- Air monitoring for solvents, dust and isocyanates

### Commercial auto: Elevated (3 of 5)

Many makers run their own trucks to company stores, dealers and job sites, carrying flammable and heavy loads.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Mixed flammable loads delivered to job sites and downtown stores

**Controls that matter**

- Hazardous goods training, load securing and driver record checks

### Crime and theft: Low (1 of 5)

Stock is bulky and low in value per unit, and trade sales are on account.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Cash sales at a factory store

**Controls that matter**

- Daily banking and till reconciliation by a second person

### Inland marine and equipment: Moderate (2 of 5)

Palletized paint in transit is easily crushed or frozen, and tinting machines often sit in dealers' stores.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Tinting or dispensing equipment on loan to retailers

**Controls that matter**

- Schedule of loaned equipment and winter shipping rules for water-based stock

### Environmental: High (4 of 5)

Solvent tank farms, drum storage and decades of washings leave soil and groundwater contamination; air emissions are permitted and watched.

Covers: Pollution on or from the site or the work.

**Watch for**

- Underground solvent tanks or old buried drums
- Wash solvent and wastewater routed to floor drains
- Past use of lead, chromate or mercury additives

**Controls that matter**

- Above-ground tanks with secondary containment and overfill alarms
- Solvent recovery still and wash-water reuse in production
- Waste shipped by licensed haulers with manifests retained

### Cyber and data: Elevated (3 of 5)

Tinting formulas, batch control and dealer ordering run on networked systems, and ransomware stops color matching at stores and plant alike.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Color formula databases pushed to dealers' tinting machines online

**Controls that matter**

- Offline backups of formulas and segmented production networks

### Professional liability: Moderate (2 of 5)

Technical staff write coating specifications for projects, and a wrong system choice brings claims for stripping and repainting costs.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Coating specifications written for bridges, tanks, ships or industrial floors

**Controls that matter**

- Specifications reviewed by a second coatings specialist, with limits in contracts

### Umbrella and excess: Elevated (3 of 5)

A plant fire spreading to neighbors, a crash with a flammable load or a failed protective coating can exceed primary limits.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Lead pigment or asbestos products in the company's history
- Plants in dense blocks with housing or businesses alongside

**Controls that matter**

- Corporate history reviewed for legacy products and predecessor liabilities
- Fire walls and separation between solvent areas and neighbors

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Older masonry and steel plants, often multi-story with gravity-fed mixing floors, beside newer high-bay warehouses; additions frequently outgrow the original sprinkler design.
- **Occupancy**: Dispersing, mixing, thinning and filling of solvent-based and water-based paints, resin cooking in heated kettles, and warehousing of flammable liquids in cans, pails and plastic totes.
- **Protection**: Foam-water or high-density sprinklers, drained cutoff rooms for flammables, bonding and grounding, rated electrical equipment in mixing and filling areas, and an outdoor tank farm.
- **Exposure**: Many older plants sit in dense industrial blocks next to housing, so a flammable liquid fire or plume threatens neighbors and their fires threaten the plant.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What are annual sales by market, and which customers take the largest share?
- What is the peak flammable liquid inventory, and what share of output is solvent-based?
- Does the company run its own stores, a delivery fleet or tinting equipment at dealers?
- Which predecessor companies or product lines, including lead or asbestos products, does the business carry?
- Do the company's own staff specify or inspect coatings on customers' projects?

### Documents to request

- Loss runs and product claim history
- Sprinkler design basis and fire protection inspection reports
- Environmental permits and soil or groundwater reports
- Standard warranty terms and a sample project specification
- Driver list with motor vehicle records

### On site: products and processes

- How are mixing tanks lidded and vapor extracted while dispersers run?
- Where is resin cooked or nitrocellulose handled, and in what quantities?
- How is powder coating milled and collected, and is the dust system explosion-protected?

### On site: flammable liquid handling

- Where are bulk solvents stored, and how do they reach the mixers?
- How are vessels, drums and totes bonded and grounded during transfer?
- What hazardous-location rating does electrical equipment in mixing and filling areas carry?
- What sprinklers, drainage and cutoffs protect mixing, filling and warehouse areas?

### On site: environment and people

- Where do wash solvent, wastewater and sludge go?
- Are any solvent tanks underground, and how is their integrity tested?
- What exposure monitoring is done for solvents, dust and isocyanates?

### On site: records and history

- What fires, spills or product failure claims occurred in the last five years?
- How are batches tested, and how long are samples retained?

### Refer or decline if you find

- Flammable liquids transferred with no bonding or grounding
- Solvent-based production in an unsprinklered building
- Plastic totes of flammable liquid stacked indoors
- Underground solvent tanks with no integrity testing
- Open-ended performance warranties on protective or marine coatings

Location

## How UrbanStat data helps.

Flood lifts drums and totes and carries solvent and pigment off site. Earthquake or wind damage to tank farms and racked flammable stock can start a fire as well as a spill, and older plants sit close to housing.

Flood · Earthquake · Wind

- Flood scores at the address show whether drum yards, tank farms and ground-level warehouses would release solvent and paint in high water.
- Parcel and permit data give construction dates and permit history, showing how old the plant is and whether sprinkler or tank upgrades were ever permitted.
- Street-by-street exposure views show which neighboring insured buildings share the block with a flammable liquids plant, with alerts when accumulation passes a set limit.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Earthquake · Wind

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**2.6** recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Paint and coating manufacturing

**2.6**

All private industry

**2.3**

0.9 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Paint and coating manufacturing (NAICS 32551), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**1** fatal work injury in 2024.

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Paint and Coating Manufacturing (NAICS 32551), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**193** citations from 42 inspections; 77% were classed serious, willful or repeat.

- 1910.119 Process safety management of highly hazardous chemicals **35**
- 1910.134 Respiratory protection **17**
- 1910.132 General requirements (personal protective equipment) **12**
- 1910.106 Flammable liquids **11**
- 1910.1200 Hazard communication **9**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Paint and Coating Manufacturing (NAICS 325510). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**377** facilities reported toxic chemical releases totaling **5.1 million pounds** on and off site.

- Xylene **876,309**
- Toluene **697,329**
- Certain glycol ethers **413,628**

Chemicals released in the largest amounts, in pounds. 175 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Paint and Coating Manufacturing (NAICS 325510). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Pollution legal liability**: Tank farm leaks, buried drums and solvent washings leave contamination outside general liability pollution cover.
- **Product recall**: Contaminated or mislabeled lots must be pulled from stores and dealers, and liability forms exclude the cost.
- **Equipment breakdown**: Dispersers, mills, fillers and boilers fail without fire, and custom equipment can take months to replace.
- **Contingent business interruption**: A loss at the main resin or titanium dioxide supplier stops lines at an undamaged plant.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [325510](https://www.urbanstat.com/industry-risk-guides/naics/?q=325510) | Paint and Coating Manufacturing |
| SIC 1987, primary | [2851](https://www.urbanstat.com/industry-risk-guides/sic/?q=2851) | Paints, Varnishes, Lacquers, Enamels and Allied Products |

**Related business types**

- [Printing ink manufacturers](https://www.urbanstat.com/industry-risk-guides/printing-ink-manufacturers/)
- [Adhesive and sealant manufacturers](https://www.urbanstat.com/industry-risk-guides/adhesive-and-sealant-manufacturers/)
- [Dye and pigment manufacturers](https://www.urbanstat.com/industry-risk-guides/dye-and-pigment-manufacturers/)
- [Paint and wallpaper stores](https://www.urbanstat.com/industry-risk-guides/paint-and-wallpaper-stores/)
- [Painting and wallcovering contractors](https://www.urbanstat.com/industry-risk-guides/painting-and-wallcovering-contractors/)
- [Compare Paint and coating manufacturers with Printing ink manufacturers](https://www.urbanstat.com/industry-risk-guides/compare/?a=paint-and-coating-manufacturers&b=printing-ink-manufacturers)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/paint-and-coating-manufacturers/

- Page: Paint and coating manufacturers: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/paint-and-coating-manufacturers/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
