---
title: "Nonferrous metal smelters and refiners (NAICS 331410, SIC 3331): Industry Risk Guide"
description: "NAICS 331410 · SIC 3331. Smelters and refiners turn ore concentrates, scrap, spent batteries, electronic waste and catalysts into copper, lead, zinc,…"
url: https://www.urbanstat.com/industry-risk-guides/nonferrous-metal-smelters-and-refiners-naics-331410/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Nonferrous metal smelters and refiners NAICS 331410 · SIC 3331

Smelters and refiners turn ore concentrates, scrap, spent batteries, electronic waste and catalysts into copper, lead, zinc, nickel, tin and precious metals using furnaces, acid plants and electrolytic tankhouses. Molten metal, sulfur dioxide, toxic metal dust and high-value bullion shape the losses, and contamination outlives the plant.

[**NAICS 331410** Nonferrous Metal (except Aluminum) Smelting and Refining](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331410) · [**SIC 3331** Primary Smelting and Refining of Copper](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3331) · [**NAICS 331492** Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331492) · [**NAICS 331420** Copper Rolling, Drawing, Extruding, and Alloying](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331420)

Manufacturing · Updated November 2026

Risk profile

1. [Property High](#line-property)
2. [Business interruption High](#line-bi)
3. [Premises liability Moderate](#line-gl)
4. [Products and completed work Moderate](#line-products)
5. [Workers’ injury Severe](#line-wc)
6. [Commercial auto Elevated](#line-auto)
7. [Crime and theft High](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental Severe](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Moderate](#line-prof)
12. [Umbrella and excess High](#line-umbrella)

**Workers’ injury.** Lead, arsenic and cadmium absorption, sulfur dioxide and arsine gas, acid mist and molten metal splashes harm workers daily.

Loss drivers

## Where losses come from.

1. Lead, arsenic and cadmium dust and fume poisoning workers and contaminating neighborhoods around the plant
2. Slag and molten metal explosions, furnace failures and fires in solvent extraction and tankhouse areas
3. Theft and fraud involving gold, silver, platinum group metals and copper cathode

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Nonferrous metal smelters and refiners, colored by its rating
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: High, 4 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: Moderate, 2 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Severe, 5 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Elevated, 3 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: High, 4 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Severe, 5 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Recovery of metals from electronic waste and lithium-ion batteries is growing, bringing plastics, fluorides and battery fires into furnaces built for cleaner feed.
- Tighter limits on lead and arsenic, and community testing of soil and children's blood, are raising cleanup demands and litigation around older smelters.
- Electrification drives demand for copper and nickel, pushing aging smelters to run harder and stretch furnace campaigns, which raises breakdown and breakout risk.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: High (4 of 5)

Molten matte and slag meet water at furnaces and granulators, and solvent extraction circuits and plastic cell lines burn fiercely.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Slag granulation or water-cooled furnace elements near tapping points
- Solvent extraction plants using flammable diluents without fixed protection
- Electrolytic cells, covers and piping made of combustible plastics

**Controls that matter**

- Leak detection on cooling circuits and dry, drained tapping floors
- Foam or deluge systems and fire walls around solvent extraction
- Sprinklers in tankhouses with plastic cells and strict hot-work permits

### Business interruption: High (4 of 5)

Furnaces and acid plants run in series; an acid plant failure stops smelting, and the authorities can halt operations over emissions.

Covers: How long and how costly a shutdown is.

**Watch for**

- One smelting furnace or one acid plant with no bypass
- Feed tied to a single mine or captive concentrate contract
- Emission limits exceeded in recent years

**Controls that matter**

- Spare blowers, converter parts and acid plant catalyst kept on hand
- Concentrate stockpiles and alternative feed contracts
- Continuous emissions monitoring with early warning before permit limits

### Premises liability: Moderate (2 of 5)

Sites are fenced and visitors few, though scrap and battery sellers, carriers and contractors come onto working ground.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Walk-in sellers of gold, catalytic converters or batteries
- Large shutdown crews of outside contractors

**Controls that matter**

- Separate reception areas that keep sellers out of process areas
- Contractor induction, permit-to-work and insurance requirements

### Products and completed work: Moderate (2 of 5)

Output is commodity cathode, ingot and bullion sold to set purity grades, so off-spec lots are usually caught and rejected.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Refined lead or alloys sold for drinking water or consumer uses
- Bars stamped with a purity that customers rely on without retesting

**Controls that matter**

- Certified assay of every lot with retained samples
- Clear specifications and limits of liability in sales terms

### Workers’ injury: Severe (5 of 5)

Lead, arsenic and cadmium absorption, sulfur dioxide and arsine gas, acid mist and molten metal splashes harm workers daily.

Covers: Injuries and illness to employees.

**Watch for**

- Blood lead results trending up, or workers removed from exposure
- Maintenance inside flues, baghouses and furnaces
- Hand tapping and skimming of furnaces

**Controls that matter**

- Biological monitoring with medical removal and enforced respirator programs
- Clean change rooms and showers so dust stays at work
- Gas detection, confined space permits and lockout during maintenance

### Commercial auto: Elevated (3 of 5)

Trucks bring concentrate, scrap and spent batteries in and carry sulfuric acid, ingot and cathode out on public roads.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Own fleet collecting spent batteries as hazardous materials
- Sulfuric acid tankers loaded and dispatched from the site

**Controls that matter**

- Hazardous materials training and endorsements for every driver
- Loading checks and spill kits on acid and battery vehicles

### Crime and theft: High (4 of 5)

Gold, silver, platinum and palladium are compact and untraceable once melted, and copper cathode bundles are stolen in transit.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Precious metal refining or electronic waste and catalyst recovery on site
- Material settled on assays done by one unchecked team
- Purchases of scrap or catalytic converters for cash

**Controls that matter**

- Vaults, cameras, exit searches and metal accounting by lot
- Dual control over weighing, sampling and assaying
- Seller identification and checks against stolen metal reports

### Inland marine and equipment: Elevated (3 of 5)

Concentrate and cathode move by ship and rail, and dore and bullion travel between mines, refiners and vaults.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Dore or bullion shipped without armored or specialist carriers
- Customers' material held on site awaiting toll refining

**Controls that matter**

- Specialist secure carriers for precious metals with declared values
- Lot-by-lot records of customers' material in care

### Environmental: Severe (5 of 5)

Stack and fugitive emissions of lead, arsenic, cadmium and sulfur dioxide, slag piles and acid spills leave contamination for generations.

Covers: Pollution on or from the site or the work.

**Watch for**

- Homes, schools or play areas close to the fence line
- Slag heaps, tailings and old waste on the property
- Battery breaking with acid draining to soil

**Controls that matter**

- Enclosed buildings under negative pressure with high-efficiency baghouses
- Acid plants capturing sulfur dioxide, with continuous stack monitoring
- Paved, washed yards, covered stockpiles and groundwater monitoring

### Cyber and data: Elevated (3 of 5)

Furnace, acid plant and tankhouse controls are networked, and refiners hold customer metal accounts open to payment fraud.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Remote vendor access to process control systems
- Metal account or payment instructions changed by email

**Controls that matter**

- Segmented control networks and offline backups of control logic
- Callback checks on any change to settlement or bank details

### Professional liability: Moderate (2 of 5)

Toll refiners settle with customers on their own sampling and assays; a weighing or assay error short-pays customers on high-value lots.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Settlement disputes with miners, jewelers or catalyst suppliers

**Controls that matter**

- Split samples retained and umpire assays allowed under contract

### Umbrella and excess: High (4 of 5)

A sulfur dioxide release drifting into town, an acid tanker crash or lead exposure claims from many neighboring families can exceed primary limits.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Housing downwind of the acid plant or furnace stacks
- Acid tankers routed through populated areas

**Controls that matter**

- Emergency release plans shared with the local authority and neighbors
- Process interlocks that stop feed when gas capture fails

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Large steel-frame furnace buildings with tall stacks, acid plants, tankhouses with acid-resistant floors and plastic cells, and older structures corroded by acid mist and sulfur gases.
- **Occupancy**: Furnaces holding molten matte, slag and metal, sulfur dioxide gas handling, flammable solvent extraction circuits, electrolytic cells, battery breaking and vaults holding precious metals.
- **Protection**: Fixed suppression on solvent extraction and hydraulic systems, sprinklered tankhouses, gas detection, dry tapping floors, a trained emergency team, and vault-grade security where precious metals are refined.
- **Exposure**: Often the main employer in a small town, with homes, schools and farms downwind; slag heaps, acid storage and rail or port terminals surround the plant.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- Which feeds are processed: ore concentrate, scrap, spent batteries, electronic waste, catalysts or dore?
- Which metals are produced, and is precious metal refining done for outside customers?
- What emissions violations, community complaints or blood lead studies have there been near the plant?
- Where does the feed come from, and how much depends on one mine, trader or battery collector?
- What is the peak value of precious metals on site and in transit, including customers' material?

### Documents to request

- Loss runs and incident reports for the current and prior terms
- Air and discharge permits with recent compliance and monitoring reports
- Worker blood lead and medical surveillance summaries
- Security survey and precious metal inventory reconciliation reports
- Environmental site assessments and any remediation orders

### On site: feeds and process

- What feed materials arrive, and how is each screened for water, explosives and radioactive sources?
- How are slag, matte and metal tapped, and is any water used near tapping points?
- Where are solvent extraction circuits and plastic cell lines, and how are they protected?

### On site: gas, dust and environment

- Where does sulfur dioxide go when the acid plant is down?
- How are baghouses inspected, and where do collected dust and slag end up?
- Are yards paved, washed and drained to treatment, and are stockpiles covered?

### On site: people

- How are blood lead levels tracked, and what happens when a worker exceeds the action level?
- Where do workers change, shower and eat, and how is dust kept out of cars and homes?
- How are flues, baghouses and furnaces entered for maintenance?

### On site: security and continuity

- How are precious metals secured, counted and reconciled, and who has vault access?
- How are sellers of scrap, batteries or catalytic converters identified and recorded?
- Which blowers, converters, acid plant parts and rectifiers are held as spares?

### Refer or decline if you find

- Rising worker blood lead levels without engineering changes
- Acid plant bypass used routinely to keep the furnace running
- Uncovered slag or dust piles close to homes or waterways
- Precious metals with no independent inventory reconciliation
- Open orders from the authorities over emissions or contamination

Location

## How UrbanStat data helps.

Many smelters sit in river valleys or mountain mining districts, where floods carry contaminated slag and soil downstream and quakes or slides threaten stacks and slag heaps. Precious metal refiners need a low-crime setting.

Flood · Earthquake · Landslide · Crime

- Flood and landslide scores at the address show whether slag heaps, acid tanks and furnace buildings sit where water or ground movement could reach them.
- Crime scores at the address inform security terms for precious metal refiners and scrap buyers before a site visit is arranged.
- Street-by-street exposure views total the insured value at a smelter complex and the refineries, acid terminals and vaults nearby, with alerts when a set threshold is passed.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Earthquake · Landslide · Crime

Public loss data · NAICS 331410

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**2.3** recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Nonferrous metal (except aluminum) smelting and refining

**2.3**

All private industry

**2.3**

0.4 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Nonferrous metal (except aluminum) smelting and refining (NAICS 33141), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**15** fatal work injuries in 2024, most often from contact with objects and equipment (6).

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Primary Metal Manufacturing (NAICS 331), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**28** citations from 9 inspections; 61% were classed serious, willful or repeat.

- 1910.1025 Lead **6**
- 1910.134 Respiratory protection **5**
- 1910.1200 Hazard communication **4**
- 1910.1027 Cadmium **3**
- 1910.1000 Air contaminants **2**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum) (NAICS 331492). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**30** facilities reported toxic chemical releases totaling **110.1 million pounds** on and off site.

- Zinc compounds **45.9M**
- Copper and copper compounds **24.9M**
- Copper compounds **18.8M**

Chemicals released in the largest amounts, in pounds. 19 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Nonferrous Metal (except Aluminum) Smelting and Refining (NAICS 331410). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Equipment breakdown**: Acid plant blowers, converters and rectifiers fail without fire and stop the whole process line.
- **Cargo and precious metals in transit**: Dore, bullion and cathode in transit carry very high values per load and need declared limits.
- **Contingent business interruption**: Smelters depend on a few mines or concentrate traders, and a mine closure starves the furnaces.
- **Customers' goods in care**: Toll refiners hold customers' dore, scrap and catalysts, often worth more than their own stock.

## NAICS and SIC codes for nonferrous metal smelters and refiners

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [331410](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331410) | Nonferrous Metal (except Aluminum) Smelting and Refining |
| NAICS 2022 | [331492](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331492) | Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum) |
| NAICS 2022 | [331420](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331420) | Copper Rolling, Drawing, Extruding, and Alloying |
| SIC 1987, primary | [3331](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3331) | Primary Smelting and Refining of Copper |
| SIC 1987 | [3339](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3339) | Primary Smelting and Refining of Nonferrous Metals, Except Copper and Aluminum |
| SIC 1987 | [3341](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3341) | Secondary Smelting and Refining of Nonferrous Metals |

**Related business types**

- [Aluminum producers and mills NAICS 331313](https://www.urbanstat.com/industry-risk-guides/aluminum-producers-and-mills-naics-331313/)
- [Steel mills NAICS 331110](https://www.urbanstat.com/industry-risk-guides/steel-mills-naics-331110/)
- [Lead-acid battery manufacturers NAICS 335910](https://www.urbanstat.com/industry-risk-guides/lead-acid-battery-manufacturers-naics-335910/)
- [Metal ore mines NAICS 212230](https://www.urbanstat.com/industry-risk-guides/metal-ore-mines-naics-212230/)
- [Scrap metal processors NAICS 423930](https://www.urbanstat.com/industry-risk-guides/scrap-metal-processors-naics-423930/)
- [Compare Nonferrous metal smelters and refiners with Aluminum producers and mills](https://www.urbanstat.com/industry-risk-guides/compare/?a=nonferrous-metal-smelters-and-refiners-naics-331410&b=aluminum-producers-and-mills-naics-331313)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/nonferrous-metal-smelters-and-refiners-naics-331410/

- Page: Nonferrous metal smelters and refiners (NAICS 331410, SIC 3331): Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/nonferrous-metal-smelters-and-refiners-naics-331410/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
