---
title: "Metal stamping and fabricating shops: Industry Risk Guide"
description: "Stamping and fabricating shops feed coil or sheet into power presses and roll formers to make vehicle parts, hardware, closures and small metal goods,…"
url: https://www.urbanstat.com/industry-risk-guides/metal-stamping-and-fabricating-shops/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Metal stamping and fabricating shops

Stamping and fabricating shops feed coil or sheet into power presses and roll formers to make vehicle parts, hardware, closures and small metal goods, often adding welding, finishing and assembly. The metal is benign; the presses are not, and customers expect defect-free parts delivered to the hour.

Manufacturing · NAICS 332119 · SIC 3469 · Updated November 2026

Risk profile

1. [Property Elevated](#line-property)
2. [Business interruption Elevated](#line-bi)
3. [Premises liability Low](#line-gl)
4. [Products and completed work Elevated](#line-products)
5. [Workers’ injury High](#line-wc)
6. [Commercial auto Moderate](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental Elevated](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Moderate](#line-prof)
12. [Umbrella and excess High](#line-umbrella)

**Workers’ injury.** Power presses are the classic amputation hazard, added to lacerations from sheet edges, noise and coil handling.

Loss drivers

## Where losses come from.

1. Hand and finger amputations at press points of operation and during die setting
2. Defective batches that force customers to sort, rework or recall assemblies
3. Fires in hydraulic systems, lubricant mist, welding cells and finishing lines

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Metal stamping and fabricating shops
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Servo presses, robots and in-die sensors cut hand feeding and amputations, but add networked controls and costly equipment with long replacement times.
- Electric vehicle programs bring new parts such as battery trays and busbars in aluminum and copper, raising stock values and theft exposure.
- Vehicle makers are shifting more recall and warranty costs onto suppliers, and some replace multi-part stamped assemblies with single large castings.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: Elevated (3 of 5)

Presses and steel stock are robust, but hydraulic oil, drawing lubricants, weld spatter and paint or powder lines supply ignition and fuel.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Oil-soaked floors, pits and scrap conveyors under presses
- Paint or powder coating added to the shop
- Plastic totes and cardboard packaging stacked high among presses

**Controls that matter**

- Sprinklers throughout, including press pits and finishing booths
- Routine cleaning of pits and oil mist ducting
- Hot work permits and welding cells screened from packaging

### Business interruption: Elevated (3 of 5)

Presses can be repaired or work moved, but dies are unique and automotive schedules allow no slack.

Covers: How long and how costly a shutdown is.

**Watch for**

- One large transfer press carrying a major contract
- Customer-owned dies with no backup tooling
- Supply contracts with shutdown penalties

**Controls that matter**

- Die storage protected and separated from production
- Contingency agreements with other stampers for critical parts
- Preventive maintenance on clutches, brakes and feed lines

### Premises liability: Low (1 of 5)

A closed factory with only carriers and customers' auditors on site.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Visiting drivers in coil unloading areas

**Controls that matter**

- Controlled loading zones and visitor escorts

### Products and completed work: Elevated (3 of 5)

Most output is components; a cracked bracket or mis-formed seat or brake part multiplies through thousands of finished goods.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Parts for vehicle restraint, seating, steering or braking systems
- Own-brand consumer goods with sharp edges or moving parts
- Contracts making the stamper pay sorting and recall costs

**Controls that matter**

- In-die sensors and statistical checks on critical dimensions
- Lot traceability from coil certificate to shipped container
- Negotiated limits on consequential and recall costs

### Workers’ injury: High (4 of 5)

Power presses are the classic amputation hazard, added to lacerations from sheet edges, noise and coil handling.

Covers: Injuries and illness to employees.

**Watch for**

- Hand feeding or part removal within the die space
- Light curtains muted or guards bypassed for short runs
- Temporary workers put on presses with little training

**Controls that matter**

- Light curtains, two-hand controls and brake monitors tested each shift
- Die blocks and lockout for every setup and jam
- Automated feeds and part ejection

### Commercial auto: Moderate (2 of 5)

Parts go out by carrier; a few shops run a truck for local customers and outside finishers.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Daily shuttle runs to platers, painters or assembly plants

**Controls that matter**

- Driver record checks and secured bins and racks

### Crime and theft: Moderate (2 of 5)

Copper, brass, stainless and aluminum coil and scrap have ready buyers.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Scrap bins emptied by a dealer with no weight reconciliation
- Nonferrous coil stored by the dock door

**Controls that matter**

- Scrap weights tracked against coil usage
- Alarm and cameras on stock and scrap areas

### Inland marine and equipment: Elevated (3 of 5)

Customers' dies and fixtures sit in the shop for the life of a program, and parts travel out for finishing.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- No list or values for customer-owned tooling
- Work in progress held at outside platers or heat treaters

**Controls that matter**

- Tooling register with replacement values and ownership
- Cover for goods at and in transit to processors

### Environmental: Elevated (3 of 5)

Lubricants, washer solutions, degreasing solvents and finishing chemicals are used daily, and older sites have solvent legacies.

Covers: Pollution on or from the site or the work.

**Watch for**

- Past or present vapor degreasing with chlorinated solvents
- Floor drains and sumps beneath oily presses
- In-house plating or phosphating

**Controls that matter**

- Aqueous cleaning in place of solvent degreasing
- Sealed pits, oil-water separation and licensed waste hauling

### Cyber and data: Elevated (3 of 5)

Press lines, scheduling and electronic orders from vehicle customers are networked; ransomware stops shipments that customers expect within hours.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Customer ordering and shipping portals on unprotected office systems
- Press controls and robots with remote vendor access

**Controls that matter**

- Segmented production network and controlled vendor connections
- Tested recovery of order and shipping systems from offline backups

### Professional liability: Moderate (2 of 5)

Shops often design dies and suggest changes to customers' parts, so an engineering error can be argued as advice as well as a defect.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Part design or engineering changes proposed by the shop
- Die design sold as a separate service

**Controls that matter**

- Customer sign-off on part drawings and engineering changes
- Documented design reviews before tooling is built

### Umbrella and excess: High (4 of 5)

Stamped parts in seats, restraints and brakes reach thousands of vehicles, so one defect can bring injury suits across a whole model.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Safety-critical vehicle parts or own-brand consumer products
- Contracts that pass vehicle recall costs to the stamper

**Controls that matter**

- Error-proofing and full traceability on safety-critical parts
- Contract caps on recall and consequential costs

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Steel-frame, metal-clad buildings with wide roof spans, deep press pits and scrap tunnels below the floor, crane bays for coil and dies, and later additions.
- **Occupancy**: Heavy presses with hydraulic oil and drawing lubricants, oil mist, welding cells, washers, paint or powder lines, and stacked plastic totes and cardboard packaging.
- **Protection**: Sprinklers throughout including press pits and finishing booths, cleaned pits and mist ducts, hot work permits, protected die storage, and monitored alarms.
- **Exposure**: Industrial parks shared with other suppliers to the same customers; neighbors' storage and finishing shops add fire exposure, and lightweight roofs face wind and hail.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What parts are made, from which metals, and what share goes to vehicle makers or their suppliers?
- Which parts are safety-critical, such as seat, restraint, steering or brake components?
- What do customer contracts say about sorting, recall and line-down charges?
- Which customers make up the largest share of sales, and are any parts single-sourced to the shop?
- What amputations, fires or product claims have occurred, and what changed afterward?

### Documents to request

- Loss runs and the employee injury log
- Press safeguarding inspection and brake monitor test records
- Customer supply agreements covering recall and warranty
- Customer-owned tooling list with replacement values

### On site: work and processes

- Which secondary operations are done in-house: welding, washing, coating, plating or assembly?
- How are coil and blanks handled and stored between operations?
- Which jobs are still hand-fed, and why are they not automated?

### On site: presses and safeguarding

- How many presses are there, of what type and tonnage, and how are they fed?
- What point-of-operation safeguards are fitted, and how often are they tested?
- Who sets dies, and what blocking and lockout steps do they follow?
- How are temporary and new workers trained before running a press?

### On site: building and fire protection

- Which areas lack sprinklers, especially press pits, scrap tunnels and finishing lines?
- How often are press pits, scrap tunnels and mist ducts cleaned?
- Where are dies stored, and who owns them?

### On site: environment and records

- What cleaning and degreasing methods are used now and in the past?
- What does the injury log show for hand and finger injuries?

### Refer or decline if you find

- Presses running with light curtains bypassed or guards removed
- Hand-fed presses operated by untrained temporary staff
- No register of customer-owned dies
- Chlorinated solvent degreaser with no site investigation
- Contracts with unlimited recall liability

Location

## How UrbanStat data helps.

Press pits and scrap tunnels flood readily, and coil steel rusts within days of getting wet. Light metal-clad buildings with wide spans are vulnerable to tornado, wind and hail.

Tornado · Flood · Wind · Hail · Earthquake

- Flood scores at the address show whether press pits, scrap tunnels and floor-stored coil are exposed, on sites where shallow water alone stops production.
- Tornado, wind and hail scores at the address inform roof terms for lightweight metal-clad plants before the quote is released.
- Street-by-street exposure views reveal accumulations where stampers and their vehicle-industry customers share one industrial park, with alerts when totals pass a threshold.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Tornado · Flood · Wind · Hail

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**4.2** recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Metal crown, closure, and other metal stamping (except automotive)

**4.2**

All private industry

**2.3**

1.2 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Metal crown, closure, and other metal stamping (except automotive) (NAICS 332119). Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**5** fatal work injuries in 2024, most often from falls, slips and trips (3).

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Forging and Stamping (NAICS 33211), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**135** citations from 43 inspections; 61% were classed serious, willful or repeat.

- 1910.147 The control of hazardous energy (lockout/tagout) **35**
- 1910.212 General requirements for all machines **16**
- 1910.219 Mechanical power-transmission apparatus **7**
- 1910.217 Mechanical power presses **7**
- 1910.178 Powered industrial trucks **5**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Metal Crown, Closure, and Other Metal Stamping (except Automotive) (NAICS 332119). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**83** facilities reported toxic chemical releases totaling **237,869 pounds** on and off site.

- Sodium nitrite **83,601**
- Certain glycol ethers **58,554**
- 1-bromopropane **15,913**

Chemicals released in the largest amounts, in pounds. 58 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Metal Crown, Closure, and Other Metal Stamping (except Automotive) (NAICS 332119). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Equipment breakdown**: Large presses, clutches, servo drives and transfer systems fail mechanically, with long lead times for replacements.
- **Product recall**: Vehicle and appliance customers pass sorting, recall and line-down costs back to their stampers.
- **Customers' tooling in care**: Customers' dies and fixtures can be worth more than the shop's own presses and are often unscheduled.
- **Site pollution liability**: Chlorinated degreasers and oily press pits from past decades leave groundwater contamination that follows the site.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [332119](https://www.urbanstat.com/industry-risk-guides/naics/?q=332119) | Metal Crown, Closure, and Other Metal Stamping (except Automotive) |
| NAICS 2022 | [336370](https://www.urbanstat.com/industry-risk-guides/naics/?q=336370) | Motor Vehicle Metal Stamping |
| NAICS 2022 | [332114](https://www.urbanstat.com/industry-risk-guides/naics/?q=332114) | Custom Roll Forming |
| NAICS 2022 | [332510](https://www.urbanstat.com/industry-risk-guides/naics/?q=332510) | Hardware Manufacturing |
| NAICS 2022 | [332999](https://www.urbanstat.com/industry-risk-guides/naics/?q=332999) | All Other Miscellaneous Fabricated Metal Product Manufacturing |
| NAICS 2022 | [339993](https://www.urbanstat.com/industry-risk-guides/naics/?q=339993) | Fastener, Button, Needle, and Pin Manufacturing |
| SIC 1987, primary | [3469](https://www.urbanstat.com/industry-risk-guides/sic/?q=3469) | Metal Stampings, NEC |
| SIC 1987 | [3465](https://www.urbanstat.com/industry-risk-guides/sic/?q=3465) | Automotive Stampings |
| SIC 1987 | [3499](https://www.urbanstat.com/industry-risk-guides/sic/?q=3499) | Fabricated Metal Products, NEC |
| SIC 1987 | [3429](https://www.urbanstat.com/industry-risk-guides/sic/?q=3429) | Hardware, NEC |

**Related business types**

- [Tool, die, mold and machine tool makers](https://www.urbanstat.com/industry-risk-guides/tool-die-mold-and-machine-tool-makers/)
- [Motor vehicle parts manufacturers](https://www.urbanstat.com/industry-risk-guides/motor-vehicle-parts-manufacturers/)
- [Sheet metal shops and contractors](https://www.urbanstat.com/industry-risk-guides/sheet-metal-shops-and-contractors/)
- [Screw machine and precision turned parts shops](https://www.urbanstat.com/industry-risk-guides/screw-machine-and-precision-turned-parts-shops/)
- [Welding and metal cutting shops](https://www.urbanstat.com/industry-risk-guides/welding-and-metal-cutting-shops/)
- [Compare Metal stamping and fabricating shops with Tool, die, mold and machine tool makers](https://www.urbanstat.com/industry-risk-guides/compare/?a=metal-stamping-and-fabricating-shops&b=tool-die-mold-and-machine-tool-makers)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/metal-stamping-and-fabricating-shops/

- Page: Metal stamping and fabricating shops: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/metal-stamping-and-fabricating-shops/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
